DASA  | ICCR  | Study in India  | QIP   | Student-E-Notice  | Admission 2026                          

Contact Information

Recruitment Nov 17, 2026

Admission to Ph. D. Programme Full-Time and Sponsored (Part-Time) Ph.D Programme Spring 2027

Applications are invited for Indian nationals for admission to the Doctor of Philosophy (Ph.D) Programme starting in January, 2027 (Spring Semester-2027) under Full Time and Sponsored (Part-Time) categories. The disciplines and areas in which the Programme will be offered (but not limited to) are as follows:

Department Research Area (For Full Time & Sponsored Part Time)

Civil Engineering

(CE)

  1. Structural Engineering, Research Area - Structural Concrete, performance-based analysis of Buildings, Fatigue life estimation of steel bridges etc
  2. Geotechnical Engineering, Research Area: . Influence of Reinforcement Interface Behavior on the Performance of C&D Waste , Integration of AI with Green Geotechnics for Reinforced Slope Stability, AI-Based Sustainable Design and Stability Assessment of Reinforced Soil Slopes, Effect of alternative material for sustainable ground engineering in high precipitation area. Understanding coupled process performance assessment and modelling in landfill, Laboratory-Scale Modeling and Instrumentation of Rainfall and Load Induced Landslides etc.
  3. Environmental Engineering: Research Area: Geo-Environmental Engineering etc

Regards

Computer Science & Engineering

(CSE)

  1. Blockchain Technology and It's applications
  2. Medical Image Analysis, Path Planning Applications in Robotics
  3. Cyber Security, Speech processing
  4. Deep/ Machine Learning for next generation communications and IoT applications
  5. Deep Learning, Hyperspectral Image processing, Computational Mathematics, Digital Signal Processing
  6. Natural Language Processing
  7. Computer Vision
  8. Synthetic Media Forensics
  9. Deep Learning for eHealth Applications
  10. Low-resource NLP, Machine Transliteration and Translation, Social Media Analytics, Machine Learning, Deep Learning
  11. Computer Vision, Image Processing, Machine Learning, Biomedical Signal Processing

Electronics & Communication Engineering

(ECE)

  1. Wireless Communication, Quantum Communication;
  2. Terrestrial/Non-terrestrial communication;
  3. Low power Memory & Memristor Design;
  4. Microwave antenna and Metasurface for Advanced Wireless Application;
  5. Nanoelectronics;
  6. Semiconductor Device Engineering;
  7. 2D-Materials for Electronics;
  8. Nano-sensors, Image processing;
  9. Biomedical image analysis;
  10. Deep Learning;
  11. IoT and VLSI Design;
  12. RIS Assisted Wireless Networks;
  13. Semantic Communication/ AI-DL based Wireless Networks;
  14. Quantum Communication;
  15. Pitching Antenna System, MEMS;
  16. Semiconductor Devices, Sensors;
  17. Microelectronics and VLSI Design;
  18. Digital Image processing and Hyperspectral image processing;
  19. Semiconductor devices for sensors and neuromorphic computing applications.

Electrical Engineering

(EE)

  1. Operation and Control of Resilient Microgrid; 
  2. Smart Grid, 
  3. Cyber-Security of Power Systems, 
  4. Peer-to-Peer Distributed Energy Trading, 
  5. ML/AI Application to Power Systems, 
  6. Power System Control, 
  7. Design and Analysis of Smart Grids, 
  8. Distributed Power Generation, PMU Analytics,
  9. Protection Schemes for Smart Grids & Underground Cables,
  10. Smart Metering and Monitoring of Power Systems, Electric Machine Drives, Electric Vehicle power drive train improvement with different machine control, 
  11. EV Drivetrain Control, 
  12. Digital Control Architecture Design for Power Electronic Circuits,

Control Systems, 

  1. Nonlinear Control and Applications, 
  2. Chaos Control Applications, Memristors dynamics and it's application, 
  3. Signal Processing, Instrumentation,
  4. Digital PLL Design,
  5. Vibration measurement, Harmonic Measurement, Motors Control, 
  6. E-Vehicle Design and Control; Power Electronics and application, 
  7. Grid-connected PV systems, Wireless Power Transfer Systems 

Mechanical Engineering

(ME)

  1. Heat pipes, vortex generators, dehumidification, compressible flow
  2. Hydrokinetic Turbine, Wind Turbine
  3. Hydro power, Wind power, Hybrid power generation system,, Robotics and Mechatronics, Mechanical system and control
  4. Manufacturing, machining
  5. Structural Health Monitoring, NDT, Wave Propagation, Composite Structres, Smart Structures
  6. Advanced Manufacturing, Material Deposition, Surface Treatment, Thin/Thick Film/Coating fabrication, Composite materials, Optimization
  7. Aeroacoustics and thermoacoustics, Underwater propeller design, CFD solver development
  8. Solar Thermal Devices, Alternative Fuels
  9. Nonlinear Dynamics, Soft Robotics, Coupled Thermo-Vibrational Analysis
  10. Additive Manufacturing/3D Printing, Advanced Manufacturing, Composite Materials, Micromachining, etc.
  11. Solar Thermal Collectors, Liquid desiccant dehumidification
  12. Computational Fluid Dynamics, Hydrogen energy, Battery modelling for EV

-

  1. Computational Fluid Dynamics, Wind tubine, Marine propeller, AI/ML in Turbulence modelling

Physics

(PH)

  1. Astroparticle Physics
  2. Theoretical and Experimental Condensed Matter Physics.
  3. Liquid Crystals

Chemical and Biological Sciences

(CBS)

  1. Physical Chemistry (Protein Chemistry, Hydrogel for Drug Delivery Applications)
  2. Crystal Enginnering (smart materials, pharmaceutical solid state forms)
  3. Material Chemistry (Energy Storage Materials, Electrocatalyst, Electrochemistry, Porous Organic Polymers) 
  4. Theoretical Chemistry (Molecules and Materials for Quantum Science, Noncovalent Interactions)

Mathematics

(MA)

1.Fluid Dynamics, Statistical Inference
Humanities & Social Sciences (HSS)
  1. Psychology: Sexuality, Social Psychology, Community Psychology
  2. Sociology: Issues of Structural Inequalities, Intersectional Marginalities, Class and Culture, Class and Consumption
  3. English: Oppression and Resistance, Popular Culture and Social Transformation, Gender Power Struggle, AI-Assisted English Language Teaching
  4. Management: General Management, Spices Marketing, Human Resource Management, Organisational Behaviour, Tourism Management

Eligibility Criteria for Admission into Ph. D. Programme:

  1. For Full-Time Scholars:

  1. Master’s degree in Engineering/ Science/ Technology/ Humanities and Social Sciences/ Management/ or Master’s degree in the allied subjects with consistently good academic record and a minimum of first class (if class is not mentioned in the transcript/certificate then minimum 60% marks or 6.5 CGPA) in the Master’s degree.

OR

Candidates with B.E./ B. Tech. with an aggregate of 75% marks or equivalent CGPA with valid GATE score will also be eligible. Candidates applying for the Programme must clear the Institute entrance exam and interview for admission.

  1. For Sponsored (Part Time) Scholars:

  1. Master’s degree in Engineering/ Science/ Technology/ Management or Master’s degree in the allied subjects with consistently good academic record and a minimum of 60% and First Class (55% in case of Humanities and Social Sciences) marks or an equivalent CGPA.

OR

  1. Candidates with B.E. / B. Tech. with an aggregate of 60% marks and First Class or equivalent CGPA are eligible. Employees from Industries and Research & Development (R&D) Organizations, Employees from Academic Institutes and Faculties of Senior Colleges, with minimum working experience of 5 years, after completion of UG (B.E/B.Tech), out of which 2 years should be from the current organization

OR

  1. Candidates with M.E/M.Tech/Master’s degree in the relevant field with consistently good academic record and a minimum of 60% and First Class (55% in case of Humanities and Social Sciences) must have minimum of 3 years working experience, out of which 2 years should be from the current organization.Candidates from Polytechnic Institutes or those with AMIE (or equivalent) must be an M. Tech graduate.

  2. Candidate’s age should not be more than 58 years.

General Instructions and Information

  1. Relaxation for SC/ST/PWD Candidates as per applicable norms.

  2. The date for determining eligibility of candidates in every respect shall be considered as on the closing date, i.e., the last date of the submission of online application form.

  3. Depending upon the number of applications received, the Institute reserves the right to fix higher eligibility criteria for shortlisting of the candidates for selection process.

  4. Eligible candidates are required to appear for a written test and interview in respect of his/ her discipline to be conducted by the concerned Department. No TA/DA will be paid for attending test / interview.

  5. General/EWS/OBC candidates are required to pay a non-refundable application fee of Rs. 1000/- (Rupees one thousand only) and for SC/ST candidates, a non-refundable application fee of Rs. 500/- (Rupees five hundred only). Women and PwD candidates are exempt from paying the application fee. The application fee is not refundable under any circumstances. Check STEP I for payment process.

  6. Candidates shall be governed as per PhD Regulations of NIT Meghalaya.

  7. Fee Structure

  8. The status regarding the selection of candidates for the admission to the Ph.D. Programme will be available at institute website (http://www.nitm.ac.in/). Selected candidates will be informed through email in respect of admission guidelines.

  9. For Scholarship details : Ph.D Regulations

Scholarships are applicable as per eligibility and as per norms.

How to Apply:

STEP-I: Candidates are advised to make the application fee payment as per category (₹1000/ for Gen/EWS/OBC, ₹500/- for SC/ST and no fee for PWD & Women candidates).

STEP-II: Fill the online application form. After submission, print out of the online application form has to be sent by email along with all supporting documents via google form link.

STEP:-1: Instructions for Payment Process using State Bank Collect (SBI Collect):

  1. Click on “Make Payment using SBI Collect” below.

Online SBI Collect

  1. A DISCLAIMER CLAUSE page will open. Check the box for I have read and accepted the terms and conditions stated above and click on the PROCEED button.

  2. From the drop down menu, State of Corporate/Institution, select Meghalaya.

  3. From the drop down menu, Type of Corporate/Institution, select Educational Institutions. Click on the GO button.

  4. From the drop down menu, Educational Institutions Name, select NIT MEGHALAYA FEE COLLECTION. Click on the SUBMIT button.

  5. A page for details of payment will open. Under Select Payment Category, select APPLICATION FEES.

  6. Please read the complete page carefully.

  7. A page to verify details and confirm this transaction will appear. Click on the CONFIRM button if your details are correct.

  8. You will be directed to payment page

  9. Complete the payment process by selecting the mode of payment that you wish

  10. Save Reference number and date of payment for filling the online Application.

STEP II: Submission online Application Form:

  1. Click on the online application form link, https://forms.gle/Xft5LW1suvPTgovq5

  2. If a candidate is applying for more than one department or more than one category (full time or part time), the candidate must pay application fees separately and choose the desired departments/category in the online application form.

  3. Candidates are advised to check the application in all aspects before pressing the submit button. Once the application is submitted, it cannot be modified.

  4. Incomplete application, application received without Payment Receipt or without the academic documents as stated below shall be summarily rejected without any explanation.

  5. Please email your documents only from the email entered in the form. The document should be scanned (not a photo), properly oriented and arranged in the order given below:

  1. Application fee receipt

  2. Proof of date of birth

  3. Educational qualifications, mark sheets and certificates in line with the filled online application form.

  4. Sponsorship Certificate/No Objection Certificate from the employers (if employed) in the prescribed format;

  1. Form - III A - Format for Sponsorship Certificate (if organization is sponsoring for carrying out the candidate’s financial aspect of the Ph.D Programme ) https://archive.nitm.ac.in/p/forms

  2. Form - III B - Format for No-Objection Certificate from Employer (mandatory for Sponsored Part Time Ph.D candidates) https://archive.nitm.ac.in/p/forms

e. Finally, save a copy of the generated online form for submitting as mentioned below.

  1. The generated online form along with soft copy of the documents mentioned at pt 5 should be emailed to phdadmission@nitm.ac.in, subject of the mail should be “PhD application form of (Your Name), (Dept. applied) for (Full Time/Part Time )”.

Note from this page (not in the original notice): The Important Dates table reads "January 2026" for the written test, interview and admission display. Given the Spring 2027 start, this is probably a typo for 2027. Please confirm with the Institute before relying on these dates.

Important Dates:

Last date of filling online application (up to 5:00 PM) 8th December 2026
Notification of Shortlisted Candidates for Ph.D Programme 14th December 2026
Written Test and Interview 19th-20th January 2027
Display of Selected Candidates & Admission 21st-22nd January 2027

For queries, you can contact below

Email - phdadmission@nitm.ac.in

Sd/-

Assistant Registrar

(Academic Affairs)