National Institute of Technology Meghalaya

List of All Publications

Publications

Civil Engineering


1. Kalita, H. M., Sarma, A. K., and Bhattacharjya, R. K. (2014), “Evaluation of Optimal River Training Work Using GA Based Linked Simulation Optimization Approach”, Water Resources Management, Springer. Volume 28, Number 8, pp 2077- 2092.
2. Patton, M.L. & Singh, K.D., 2014. “Finite element modelling of concrete-filled lean duplex stainless steel tubular stub columns”. International Journal of Steel Structures, Springer; 14: 619-632.
3. Marthong C. and Marthong S. (2015). Enhancing mechanical properties of concrete prepared with coarse recycled aggregates.The IES Journal Part A: Civil & Structural Engineering, Vol. 8 (3), pp. 175 - 183.
4. Marthong, C., Dutta, A. and Deb, S.K. (2015). “Study on size effect of RC and Rehabilitated exterior beam-column connections under cyclic loading” European Journal of Environmental and Civil Engineering, DOI: 10.1080/19648189.2015.1056385.
5. Marthong C. (2015). Effects of PET fiber arrangement and dimensions on mechanical properties of concrete. The IES Journal Part A: Civil & Structural Engineering, Vol. 8 (2), pp. 111 – 120.
6. Sonowal, P., Khwairkpam, M., Kalamdhad, A. S., (2015). Vermicomposting of Dewatered Sludge from Pulp and Paper mill. Int. J. of Environment and Waste Management, 15(1), 24-38.

Computer Science And Engineering


1. A. Bhattacharya, R. Ghosh, K. Sinha, D. Datta, B. P. Sinha, “Non-Contiguous Channel Allocation for Multimedia Communication in Cognitive Radio Networks”, IEEE Transactions on Cognitive Communications and Networking (Accepted).
2. A. Bhattacharya, K. Sinha, D. Datta, B. P. Sinha, “MRBNS: A New Energy-Efficient Communication Scheme in Low Power Wireless Networks”, International Journal of Sensor Networks (Accepted).
3. A. Bhattacharya, P. Majumder, K. Sinha, B. P. Sinha, K. V. N. Kavitha, “An Energy-EfficientWireless Communication Scheme using Quint Fibonacci Number System”, in International Journal of Computer Networks and Distributed Systems (Inderscience), vol. 16 no. 2, pp. 140-161, Feb. 2016.
4. A. Datta, S. Ghosh and A. Ghosh, “Combination of Clustering and Ranking Techniques for Unsupervised Band Selection of Hyperspectral Images”, IEEE Journal of Selected Topics in Applied Earth Observation and Remote Sensing, Vol. 8, No. 6, pp. 2814-2823, 2015.
5. Sanjoy Pratihar and Partha Bhowmick, “Fast and Direct Polygonization for Gray-Scale Images Using Digital Straightness and Exponential Averaging”, International Journal of Image and Graphics, Vol. 16, No. 4, Art. 1650007 (36 pages), 2016.
6. A. Kole, K. Datta and I. Sengupta, “A Heuristic for Linear Nearest Neighbor Realization of Quantum Circuits by SWAP Gate Insertion Using N-Gate Lookahead”, IEEE J. Emerg. Sel. Topics Circuits Syst., Vol.-6, Issue No.-1, pp -62-72, 2016.
7. P. Saha, and D. Kumar, “A new algorithm for the computation of the decimals of inverse”, Scientia Iranica journal, accepted on Feb 2016, ISSN: 1026-3098.
8. I. Hussain, Z. I. Ahmed, N. Sarma, D. K. Saikia, An Efficient TDMA MAC Protocol for Multi-hop WiFi-Based Long Distance Networks, Wireless Personal Communication, Vol. 86, No. 4, pp 1971-1994, January, 2016.
9. H. Choudhury, B. Roychoudhury, D. K. Saikia, Security Extension for Relaxed Trust Requirement in Non3GPP Access to the EPS, International Journal of Network Security, Vol. 18, No. 6, pp 1041-1053, 2016.
10. H. Choudhury, B. Roychoudhury, D. K. Saikia, Enhanced Identity Privacy in UMTS, International Journal of Ad Hoc and Ubiquitous Computing, Inderscience (Accepted).
11. I. Hussain, Z. I. Ahmed, N. Sarma and D. K. Saikia, A QoS-aware Dynamic Bandwidth Allocation Scheme for Multi-hop WiFibased Long Distance Networks, EURASIP Journal on Wireless Communications and Networking, June, 2015, DOI: 10.1186/ s13638-015-0352-z.

Electrical Engineering


1. P. Garanayak and G. Panda, “Harmonic Elimination and Reactive Power Compensation by Novel Control Algorithm based Active Power Filter”, Journal of Power Electronics Vol. 15, No. 6, November 2015.
2. Santanu Kumar Dash, Gayadhar Panda, Pravat Kumar Ray and Sashank Sekhar Pujari “Realisation of active power filter based on Indirect Current Control Algorithm using Xilinx System Generator for Harmonic Elimination”, International Journal of Electrical Power and Energy System-Elsevier Science, 74 (2016), 420-428.
3. P.K.Ray, P.S.Puhan, and G.Panda, “Real time harmonics estimation of distorted power system signal” International Journal of Electrical Power and Energy System-Elsevier Science, 75 (2016), 91-98.
4. P. Garanayak and G. Panda, “A Fast and Accurate Measurement of Harmonic Parameters Employing Hybrid ADALINE-FXLMS algorithm”, IET Generation, Transmission & Distribution Vol. 10 (2016), Iss. 2, pp. 421–436.
5. Smitha Joyce Pinto and Gayadhar Panda, “Performance evaluation of WPT based islanding detection for grid-connected PV systems” International Journal of Electrical Power and Energy System-Elsevier Science, 78 (2016), 537-546.
6. Sanjoy Deb Barma and, Arunima Dutta, “Utilizing Electric Vehicles for LFC in Restructured Power Systems using Fractional Order Controller”, IEEE Transactions on Smart Grid, 2016, DOI 10.1109/TSG.2016.2527821.
7. Agamani Chakraborty,Pradip K. Sadhu, and Atanu Banerjee, “Review of Induction Heating system – a comprehensive replacement of BSD 2000 in Hyperthermia Treatment Technology”, Journal of Biological ,Pharmaceutical And Chemical Research, Vol 2, Issue 1, pp. 1-12, April,2015.
8. R. Roy, A. Dalal, P. Kumar, “Prediction of High Frequency Core Loss for Electrical Steel Using the Data Provided by Manufacturer”, Journal of magnetism and magnetic materials, Vol.-410, Page No. 248-256, 2016.

Electronics & Communication Engineering


1. Partha Bhattacharyya, B. Kundu, S. Ghosh, Vinay Kumar, and A. Dandapat, “Performance Analysis of a Low Power High Speed Hybrid 1 Bit Full Adder Circuit”, IEEE Transactions on Very Large Scale Integration Systems, Vol-23, 2015.
2. S. Mishra and A. Dandapat, “EMDBAM: A Low Power Dual Bit Associative Memory with Match Error and Mask Control”, IEEE Transactions on Very Large Scale Integration Systems, Vol.-24, Issue No.-99,2016.
3. P. Saha, D. Kumar, “A new algorithm for the Computation of the Decimals of the Inverse”, Scientia Iranica: Transc. D: Computer Science & Engineering and Electrical Engineering, February 2016.
4. D. Mitra, B. Ghosh, A. Sarkhel, and S. R. B. Chaudhuri, “A Miniaturized Ring Slot Antenna Design With Enhanced Radiation Characteristics”, IEEE Transactions on Antennas And Propagation, Vol.-64, Issue No.-1, Page Nos -300–305, 2015.
5. Sarkhel, D. Mitra, and S. R. B. Chaudhuri, “A Compact Metamaterial with Multi-band Negative-index Characteristics”, Springer: Applied Physics A, Vol.-122, Issue No.-4, Page Nos -122:1-10, 2016.
6. Rangababu Peesapati, “FPGA based System on Chip (SoC) for Space computation”, Planex Newsletter, Vol.-6, Issue No.-1, Page Nos -16-20, 2016.

Mechanical Engineering


1. C. Marthong, D. K. Sarma, Influence of PET fiber geometry on the mechanical properties of concrete: an experimental investigation, European Journal of Environment and Civil Engineering, Taylor and Francis, Vol.-20, Issue No.-7, Page No. 771-784, 2016.
2. C. Marthong, D. K. Sarma, Flexural behavior of ferrocement plates incorporating steel and PET fibers, Materials and Construction Technologies for Sustainable Development, Key Engineering Materials, Trans Tech Publication, Vol.-666, Page No. 97-106, 2016.
3. R. Kalidasan, M. Yatin, D. K. Sarma, U.S. Dixit, S. Senthilvelan, Preliminary Experimental Investigation on Multi-Tool Turning Process, International Journal of Machining and Machinability of Materials, Inderscience, Vol.-Accepted, 2016.
4. K. Sasmal, S. Maity, H. Warrior, Modeling of turbulent dissipation and its validation in periodically stratified region in the Liverpool Bay and in the North Sea, Ocean Dynamics, Vol.-65, Issue No.-7, PageNos -969-988, 2015.
5. K. Sasmal, SR Bonthu, S. Maity, H. Warrior, Effect of Atmospheric Forcing on Plume Dispersion and Study of Nuclear Effluent Trajectories for the Kalpakkam Coast, India, Journal of Hazardous, Toxic and Radioactive Waste, ASCE, Vol.-19, Issue No.-3, Page Nos -04014035-1 to 16, 2015.
6. P. Mandal, B. K. Sarkar, R. Saha, S. Mookherjee, D. Sanyal, Designing an optimized model-free controller for improved motion tracking by rugged electrohydraulic system, ProcIMechE Part I: J Systems and Control Engineering, Vol.-230, Issue No.-5, Page Nos -385-396, 2016.
7. S. Dasmahapatra, B. K. Sarkar, R. Saha, A. Chatterjee, S. Mookherjee, D. Sanyal, Design of an Adaptive-Fuzzy-Bias-SMC and Validation for a Rugged Electrohydraulic System, IEEE/ASME Transaction on Mechatronics, Vol.-20, Issue No.-6, Page Nos -2708-2715, 2015.
8. P. Mandal, B. K. Sarkar, R. Saha, A. Chatterjee, S. Mookherjee, D. Sanyal, Real-time fuzzy-feedforward controller design by bacterial foraging optimization for an electrohydraulic system, Engineering Applications of Artificial Intelligence, Vol.- 45, Page Nos -168-179, 2015.
9. B. B. Ghosh, B. K. Sarkar, R. Saha, Realtime performance analysis of different combinations of fuzzy–PID and bias controllers for a two degree of freedom electrohydraulic parallel manipulator, Robotics and Computer-integrated manufacturing, Vol.-34, Page Nos -62-69, 2015.
10. P. Mandal, B. K. Sarkar, R. Saha, S. Mookherjee, S. K. Acharya, D. Sanyal, GA-Optimized Fuzzy-Feedforward Motion Tracking Control by a Rugged Electrohydraulic System, IEEE/ASME Transaction on Mechatronics, Vol.-20, Issue No.-4, Page Nos -1734-1742, 2015.
11. F. Millo, B. K. Debnath, T. Vlachos, C. Ciaravino, L. Postrioti, and G. Buitoni, Effects of different biofuels blends on performance and emissions of an automotive diesel engine, Fuel, Vol.-159, Page Nos -614-627, 2015.
12. B. K. Debnath, U.K. Saha, and N. Sahoo, A comprehensive review on the application of emulsions an alternative fuel for diesel engines, Renewable and Sustainable Energy Reviews, Vol.-42, Page Nos -196–211, 2015.
13. R. Singh, K. Das, S. C. Mishra, J. Okajima, S. Maruyama, Minimizing skin thermal damage using surface cooling during laser induced thermal therapy – a numerical study, ASME: Journal of Thermal Science and Engineering Applications, Vol.- 8, Page Nos -011002-1-6, 2015.
14. R. Singh, K. Das, J. Okajima, S. Maruyama, S.C. Mishra, Modelling skin cooling using optical windows and cryogens during laser induced hyperthermia in a multilayer vascularized tissue, Applied Thermal engineering, Vol.-89, Page Nos -28-35, 2015.
15. K. Debnath, A. Sisodia, A. Kumar, and I. Singh, Damage-Free Hole Making in Fiber-Reinforced Composites: An Innovative Tool Design Approach, Materials and Manufacturing Processes, Vol.-31, Issue No.-10, Page No. 1400-1408, 2016.
16. A. V. Singhal, K. Debnath, I. Singh, and B.S.S. Daniel, Critical Parameters Affecting Mechanical Behavior of Natural Fiber Reinforced Plastics, Journal of Natural Fibers, 2016.
17. K. Debnath, I. Singh, and A. Dvivedi, On the Analysis of Force During Secondary Processing of Natural Fiber Reinforced Composite Laminates, Polymer Composites, 2016.
18. P. K. Bajpai, K. Debnath, and I. Singh, Hole Making in Natural Fiber-Reinforced Polylactic Acid Laminates: An Experimental Investigation, Journal of Thermoplastic Composite Materials, 2016.
19. V. Dhawan, K. Debnath, I. Singh, and S. Singh, Prediction of Forces during Drilling of Composite Laminates Using Artificial Neural Network: A New Approach, FME-Transactions, Vol. 44, Issue No.-1, Page No. 36-42, 2016.
20. V. Dhawan, K. Debnath, I. Singh, and S. Singh, A Novel Intelligent Software-based Approach to Predict Forces and Delamination during Drilling of Fiber-Reinforced Plastics, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol.-230, Issue No.-2, Page No. 603-614, 2016.
21. V. K. Doomra, K. Debnath, and I. Singh, Drilling of Metal Matrix Composites: Experimental and Finite Element Analysis, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.-229, Issue No.-5, Page No. 886-890, 2015.
22. K. Debnath, I. Singh, and A. Dvivedi, Rotary Mode Ultrasonic Drilling of Glass Fiber-Reinforced Epoxy Laminates, Journal of Composite Materials, Vol.-49, Issue No.-8, Page No. 949-963, 2015.

Chemical & Biological Sciences


1. 1) A. Singha Roy, P. Ghosh, Characterization of the binding of flavanone hesperetin with chicken egg lysozyme using spectroscopic techniques: effect of pH on the binding, Journal of Inclusion Phenomena and Macrocyclic Chemistry 84, 2016, 21-34.
2. 2) P. Ghosh, A. Singha Roy, S. Chaudhury, S. Jana, K. Chaudhury, S. Dasgupta, Preparation of albumin based nanoparticles for delivery of fisetion and evaluation of its cytotoxic activity, International Journal of Biological Macromolecules 86, 2016, 408-417.
3. 3) A. Singha Roy, D. R. Tripathy, S. Samanta, S. K. Ghosh, S.Dasgupta, DNA damaging, cell cytotoxicity and serum albumin binding efficacy of the rutin-Cu(II) complex, Molecular BioSystems 12, 2016, 1687-1701.
4. 4) A. Singha Roy, P. Ghosh, S. Dasgupta, Glycation of human serum albumin alters its binding efficacy towards the dietary polyphenols: A comparative approach, Journal of Biomolecular Structure & Dynamics 2015, DOI: 10.1080/07391102.2015.1094749.
5. 5) Kyu Cheol Lee, Taehyo Kim, Seyeong Song, Yiho Kim, Gitish K. Dutta, Dong Suk Kim, Jin Young Kim and Changduk Yang “Medium bandgap copolymers based on carbazole and quinoxaline exceeding 1.0 V open-circuit voltages” RSC Adv., 2016,6, 17624-17631.
6. 6) Grégoire Guillon, Tammineni Rajagopala Rao, Susanta Mahapatra, and Pascal Honvault, “Quantum Dynamics of the 18O + 36O2 Collision Process”, J. Phys. Chem. A, 2015, 119, 12512-12516.
7. 7) T. Rajagopala Rao, G. Guillon, S. Mahapatra, P. Honvault, Differential cross sections and product rovibrational distributions for 16O + 32O2 and 18O + 32O2 collisions. J. Phys. Chem. A, 2015, 119, 11432-11439.

Humanities & Social Sciences


1. Amal Dev Sarma and B. Roy choudhury, Analysing Electronic Word-of-Mouth (eWOM) in Social Media for Consumer Insights – A Multidisciplinary Approach, International Journal of Science, Technology and Management, Vol. 04, Issue No. 01, Page Nos -978-990, 2015.

Mathematics


1. M. Saha and S. Bandopadhyay, Combinatorial properties of generalized M-matrices, Electron. Journal of Linear Algebra, Vol. 30, pp. 550-576, 2015.
2. B. Ghosh, L. Mailleret and F. Grognard, Natural enemies deployment in patchy environments for augmentative biological control. Applied Mathematics and Computation, Vol. 266, pp. 982-999, 2015.
3. P. Paul, B. Ghosh and T. K. Kar, Impact of species enrichment and fishing mortality in three species food chain models. Communications in Nonlinear Science and Numerical Simulation, Vol. 29(1-3), pp. 208-223, 2015.
4. G. S. Seth, R. Sharma, B. Kumbhakar and A. J. Chamkha, Hydromagnetic Flow of Heat Absorbing and Radiating Fluid over Exponentially Stretching Sheet with Partial Slip and Viscous and Joule Dissipation, Engineering Computations, Vol. 33(3), pp. 907-925, 2016.
5. N. Jana, S. Kumar and N. Misra, Classification rules for two-parameter exponential populations under order restrictions on parameters, Journal of Statistical Computation and Simulation, Vol. 86(8), pp.1559-1581, 2016.
6. N. Jana and S. Kumar, Classification into two-parameter exponential populations with a common guarantee time, American Journal of Mathematical and Management Sciences, Vol. 35(1), pp. 36-54, 2016.
7. N. Jana and S. Kumar, Estimation of ordered scale parameters of two exponential distributions with a common guarantee time, Mathematical Methods of Statistics, Vol. 24(2), pp. 122-134, 2015.
8. J. Srinivas and J. V. Ramana Murthy, Second Law Analysis for the Flow of Two Immiscible Micropolar Fluids between Two Porous Beds, Journal of Engineering Thermophysics, Vol. 25(1), pp. 126-142, 2016.
9. M. Saha, Iterative method for linear System with coefficient matrix as an Mv matrix, Applied and Computational Matrix Analysis in the series Proceeding of Mathematics and Statistics (Accepted).
10. Tikaram Subedi and A.M. Buhphang, On SF rings and Strongly regular rings, Kyungpook Mathematical Journal (Accepted).
11. J. Srinivas, J. V. Ramana Murthy and A. J. Chamkha, Analysis of Entropy Generation in an Inclined Channel Flow Containing Two Immiscible Micropolar Fluids Using HAM, International Journal of Numerical Methods for Heat and Fluid Flow, DOI: 10.1108/HFF-09-2015-0354. (Accepted).
12. G. Nagaraju, J. Srinivas and J. V. Ramana Murthy, A.M. Rashad, Entropy Generation Analysis of the MHD Flow of Couple Stress Fluid between Two Concentric Rotating Cylinders with Porous Lining, Heat Transfer-Asian Research, DOI: 10.1002/ htj.21214. (Accepted).
13. J. Srinivas and J. V. Ramana Murthy, Thermal Analysis of Flow of Immiscible Couple Stress Fluids in a Channel, Journal of Applied Mechanics and Technical Physics. (Accepted).

Physics


1. S. Saxena, P. Yogi, P. Yadav, S. Mishra, H. Pandey, H. M. Rai, V. Kumar, P. Sagdeo, and R. Kumar, Role of metal nanoparticles on porosification of silicon by metal induced etching (MIE), Superlattices and Microstructures, Vol.-94, Page-101, 2016.
2. P. Yogi, S. K. Saxena, S. Mishra, H. M. Rai, R. Late, V. Kumar, B. Joshi, P. R. Sagdeo and R. Kumar, Interplay between Phonon Confinement and Fano Effect on Raman line shape for semiconductor nanostructures: Analytical study, Solid State Communication, Vol.-230, Page-25, 2016.
3. S. K. Saxena, R. Borah, V. Kumar, H. M. Rai, R. Late, V. Sathe, P. R. Sagdeo and R. Kumar, Raman spectroscopy for study of interplay between phonon confinement and Fano effect in Silicon Nanowires, Journal of Raman Spectroscopy, Vol.-47, Page-283, 2016.
4. C. Baldacchini, V. Kumar, Anna R. Bizzarri and S. Cannistraro, Electron Tunnelling through Single Azurin Molecules can be on/off Switched by Voltage Pulses, Applied Physics Letters, Vol.-106, Page-183701, 2015.
5. V. Kumar, G.B. Reddy and R. Pasricha, Thermal deoxygenation causes Photoluminescence shift from UV to blue region in lyophilized graphene oxide, RSC Advances, Vol.-5, Page-74342, 2015.
6. T. Bora and S. Ravi, Study of critical behavior in ferromagnetic in LaCr0.3Mn0.7O3, Journal of Magnetism and Magnetic Materials, Vol.-doi:10.1016/j.jmmm.2016.02.011, 2016.
7. T. Bora and S. Ravi, Sign reversal of magnetization and tunable exchange bias field in NdCr1-xFexO3 (x = 0.05 -0.20), Journal of Magnetism and Magnetic Materials, Vol.-386, Page-85, 2015.
8. T. Bora and S. Ravi, Sign reversal of magnetization and ferromagnetism in NdCr1-xMnxO3 (x = 0 to 0.50), Journal of Superconductivity and Novel Magnetism, Vol.-28, Page-869, 2015.
9. J. Barman, T. Bora and S. Ravi, Study of exchange bias and training effect in NiCr2O3, Journal of Magnetism and Magnetic Materials, Vol.-385, Page-93, 2015.
10. N. Kumari, A. Ghosh, A. Bhattacharjee, Influence of Cu doping on the structural, electrical and optical properties of ZnO, Pranama, Vol.-84, Issue No.-4, Pages -621-635, 2015.

Civil Engineering


1. Kalita, H. M. (2015), “A comparative study of two different downstream boundary conditions in modelling river flow”, CD proceedings of International Conference on Sustainable Technologies in Building & Environment, Chennai on 15-17 July 2015.

Computer Science And Engineering


1. C. Lalengmawia, A. Bhattacharya, A. Datta, Image Stenography using Advanced EncryptionStandard for implantation of Audio/Video Data, to appear in Proc. International Conference on Recent Trends in Information Technology, IEEE ICRTIT, 8-9 Apr. 2016 (Third Best Paper).
2. K. Sinha, B. Gupta, S. Rahimi, A. Bhattacharya, “Candidate Core Selection for Load-Balanced Multicore Shared Tree Multicasting”, in Proc. International Conference on Recent Advances in Information Technology (IEEE RAIT ), 3-5 Mar. 2016.
3. A. Bhattacharya, S. Audhya, K. Sinha, “An Anti-Jamming Protocol Based on Secret Reallocation of Channels”, in Proc. International Conference on Recent Advances in Information Technology (IEEE RAIT ), 3-5 Mar. 2016.
4. D. Das, and A. Chakrabarty, “Human Gait Recognition using Deep Neural Networks,” Proc. 2nd International Conference on ICT for Competitive Strategies (ICTCS 2016), 4-5 March 2016, Computer Society of India Udaipur, India, ACM - ICPS.
5. A. Chakrabarty, C. Lalengmawia, K. P. Sharma, D. Das, and N. Das, “On processing of Abbreviations, Stop Words and Transliterations for classification of Twitter topics,” Proc. International Conference on Microelectronics, Computing and Communication (MicroCom 2016), 23-25 January 2016, NIT Durgapur, India, IEEE Publications.
6. A. Chakrabarty, and N. Das, “Assessment of values of time-domain and frequency domain parameters for ECG signals through HRV analysis using Symlets for Arrhythmia prediction,” in Advances in Computational Intelligence: Proc. International Conference on Computational Intelligence 2015, 10-11 December 2015, BIT Mesra, Ranchi, India, Springer.
7. P. M. N. Rani, K. Datta, and A. Chakrabarty, “Synthesis of Ternary Reversible Circuits: A Group Theoretic Approach” in ACM-W workshop on Regional Celebration of Women in Computing, East and North-East (ACMW 2015), 2-3 November 2015, IIT Guwahati, India.
8. D. Das, and A. Chakrabarty, “Human Gait Based Gender Identification System Using Hidden Markov Model and Support Vector Machines,” Proc. IEEE International Conference on Computing, Communication and Automation (ICCCA 2015), IEEE Publications, May 2015, pp. 268-272. [Online].
9. A. Kumar and A. Datta, “Adaptive Edge Discriminated Median Filter To Remove Impulse Noise”, Proceedings of IEEE International Conference on Computing, Communication and Automation (ICCCA 2016), Delhi, India, pp., 2016.
10. Sanjoy Pratihar and Najima Begum, Understanding Shape Context by Analysis of Farey Ranks, Proc. 5th Internatioal Conference on Informatics, Electronics and Vision, The University of Dhaka, Dhaka, (to be published by IEEE press), May 13-14, 2016.
11. F. Lalchhandama, B. Sapui, K. Datta, An improved approach for the synthesis of Boolean functions using memristor based IMPLY and INVERSE-IMPLY gates, IEEE Computer Society Annual Symposium on VLSI (ISVLSI-2016), Period -July, Place -Pittsburgh, Pennsylvania, U.S.A (Accepted), 2016.
12. Nabajyoti Medhi, Manjish Pal, “Sixsoid: A new paradigm for k-coverage in 3-D wireless sensor networks”, ICCCS 2015, IEEE Mauritius, Dec 2015.
13. Chaitanya Buragohain and Nabajyoti Medhi, “FlowTrApp: A SDN based Architecture for DDoS Attack Detection and Mitigation”, 3rd International Conference on Signal Processing and Integrated Networks (SPIN 2016), Feb 2016.

Electrical Engineering


1. S.J.V.Prakash and Biswajit Kar, “Iris Recognition for Person Verification”, IEEE 3rd International Conference on Electronics and Communication Systems ICECS 2016, Coimbatore.
2. Asim Datta, Krishanu Bhattacharjee, Sanjoy Debbarma, Biswajit Kar, “Load Frequency Control of a Renewable Energy Sources based Hybrid System”, in procedding on 2015 IEEE Conference on Systems, Process and Control (ICSPC 2015), 18 - 20 December 2014, Bandar Sunway, Malaysia.
3. Pravat Kumar Ray, Sourav Bengani and Gayadhar Panda, “ Estimation of Power System Frequency using a Modified Nonlinear Least Square Technique”, 2015 IEEE PES General Meeting July 26-30, 2015, Denver, USA.
4. B. Baruah, M. Ghosh, S. Das, “Optimal Placement of Protective Devices in a Distributed Power System”, IEEE INDICON 2015, Period -17th-20th Dec, 2015, Place -Delhi, India.
5. M. Ghosh, S. Ghosh, P.K. Saha, G.K. Panda, “Design and Implementation of PIC16F877A Microcontroller Based Data Acquisition System with Visual Basic Based GUI”, 7th International Conference on Intelligent Systems, Modelling and Simulation 2016, IEEE Sponsored, 25-27 Jan, 2016, Bangkok, Thailand.
6. Sanjoy Debbarma, L.C Saikia, Nidul Sinha, Asim Datta and B.Kar, “Fractional order two degree of freedom control for AGC of an interconnected multi-source power system”, 17th IEEE Conference on Industrial Technology, March 14-17, 2016 (ICIT 2016), Taipei.
7. Sanjoy Debbarma, Anubhav Nath, Upasana Sarma and Lalit Chandra Saikia, “Cuckoo search algorithm based two degree of freedom controller for multi-area thermal system”, IEEE ICEPE 2015, NIT Meghalaya, Shillong.
8. Atanu Banerjee, P K Biswas, Chiranjit Sain, “The Comparative Study between Different Performance Indices of a Permanent Magnet Synchronous Motor (PMSM) Drive on Variable Sensor Angle”- published in the proceedings of the International Conference on Power Electronics Systems and Applications (PESA-2015), Sponsored by IEEE, IET, Hongkong Polytechnic University, Hongkong, 15-17 December 2015,pp.1-6.
9. P K Biswas, Atanu Banerjee, Chiranjit Sain, “ Design and Development of a Closed Loop Model of an Adjustable Speed Permanent Magnet Synchronous Motor (PMSM) Drive using PI Controller”- published in the proceedings of the International Conference on Power Electronics Systems and Applications (PESA-2015), Sponsored by IEEE, IET, Hongkong Polytechnic University, Hongkong, 15-17 December 2015, pp.1-5.
10. Chiranjit Sain,Pabitra Kr. Biswas, Atanu Banerjee, “Design and analysis of open loop model of a Permanent Magnet Synchronous Motor (PMSM) Drives”,published in the proceedings of the International Conference on Energy , Power and Environment (Towards Sustainable Growth) [ICEPE-2015], June 12-13,2015, Shillong.
11. Agamani Chakraborty, Koushik Neogi, Atanu Banerjee and Pradip K. Sadhu, “Switching frequency optimization in Hyperthermia treatment using BSD 2000”- published in the proceedings of the International Conference on Energy , Power and Environment (Towards Sustainable Growth) [ICEPE-2015], June 12-13,2015,Shillong.
12. P. Satish Kumar and Supriyo Das, “Study of Lightning Phenomena on UG Cables based on Soil Resistivity”,IEEE International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), Bangalore, India, Dec 2015.
13. Swarnankur Ghosh and Supriyo Das, “Effect of lightning on soil charateristics with and without underground cable”,2nd IEEE International Conference on Control, Instrumentation, Energy and Communication (CIEC), Kolkata, India, Jan 2016.
14. Shaik Affijulla, Praveen Tripathy, “Estimation of phasor under dynamic condition using convolution”, 2015 IEEE PES General Meeting, Colorado, USA, PP. 1-5, 2015.

Electronics & Communication Engineering


1. Shashi Kumar, Pradeep Kumar Rathore and Jamil Akhtar, A comparative study on p- and n-channel MOSFET embedded pressure sensing structures integrated with current mirror readout circuitry, 2016 IEEE International Students’ Conference on Electrical, Electronics and Computer Sciences (SCEECS 2016) held at NIT Bhopal from 5-6 March 2016.
2. A. Sarkhel, S. R. B. Chaudhuri, Design of a compact triple-band metamaterial absorber with wide angle of incidence using connected resonator topology, International Conference on Electromagnetics in Advanced Applications (ICEAA), Period -7- 11 Sept., Place -Turin,Italy, Page -1239 - 1242, 2015.
3. A. Sarkhel, S. R. B. Chaudhuri, Design of Miniaturized PIFA with Magnetic Resonator Metamaterial Loading, IEEE Applied Electromagnetics Conference, Period -December 18-21,2015, IIT Guwahati.
4. V. Kumar, C. K. Jha, G. Thapa and A. Dandapat, Design of Low Power and High Speed Carry Look Ahead Adder (CLA) Using Hybrid CMOS Logic Style, International Conference on Micro Electronics Electromagnetics and Telecommunications (ICMEET 2015),Page -645-654, Visakhapatnam, Andhra Pradesh, India, December, 2015.
5. P. Saha, P. Samanta, D. Kumar, 4-2 and 5-2 Decimal Compressors, 7th Int. Conf. on Intelligent Systems, Modelling and Simulation (ISMS 2016), Bangkok, Thailand, (Jan-2016).
6. Avadhesh Kumar, Ch V Rama Rao, Low-power structures of digital matched filter for direct sequence spread spectrum systems, IEEE WISPNET 2016, Period -March 23-25, Place -Chennai, 2016.

Humanities & Social Sciences


1. Paonam Sudeep Mangang and Ms. B. Samita Devi, ‘Representation of Gender Roles in Meitei Folktales’, National Seminar on ‘Gender and Folklore in Northeast India: Beliefs and Practices’, NEHU, Shillong, 30-31 March 2016.
2. Sujit Kumar Dutta, “The Usage of MAP Species by the Tribal People of Tripura (India) for Health care and Earning Livelihood by Trading the same in the Sub-continent Market”, International Congress on Technology – Engineering & Science(ICONTES), Kuala Lumpur.

Mathematics


1. S. Basu, N. Jana, A. Bag, M. Mahadevappa, J. Mukherjee, S. Kumar and R. Guha,Emotion recognition based on physiological signals using valence-arousal model, 3rd International Conference on Image Information Processing (ICIIP) IEEE Conference Publications, pp.50-55, DOI:10.1109/ICIIP.2015.7414739, 2016.
2. Dr. Manideepa Saha, Iterative method for linear system with coefficient matrix as an M V -matrix, International conference MAT-TRIAD, University of Coimbra, Portugal during September 7-11, 2015.
3. Dr. Bapan Ghosh, International Conference on Recent Advances in Mathematical Biology, Analysis and Applications (ICMBAA2015), Aligarh Muslim University, 04-06 June, 2015.
4. Dr. Srinivas Jangili, Thermodynamic Analysis for an Inclined Channel containing Two Immiscible Micropolar Fluids using HAM, 60th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM), MNIT Jaipur, Rajasthan, India during December 16-19, 2015.
5. Dr. Srinivas Jangili, Effect of Buoyancy Force on Entropy Generation in a Vertical Parallel Plate Channel, XXVII IUPAP Conference on Computational Physics: CCP2015, IIT Guwahati, December 02-05, 2015.
6. Dr. Bidyasagar Kumbhakar, Effects of Hall Current, Rotation and Thermo-Diffusion on Unsteady MHD Free Convection Heat and Mass Transfer Flow Past a Moving Vertical Plate Embedded in a Uniform Porous Medium, 60th Congress of Indian Society of Theoretical and Applied Mechanics (ISTAM)-An International Conference, MNIT Jaipur, December 16- 19, 2015.
7. Dr. Bidyasagar Kumbhakar, Unsteady MHD Free Convection Flow with Hall Effects of a Radiating and Heat Absorbing Fluid Past a Moving Vertical Plate with Variable Ramped Temperature, XXVII IUPAP Conference on Computational Physics (CCP-2015), IIT Guwahati, December 02- 05, 2015.

Civil Engineering


1. C. Marthong and D.K.Sarma, Influence of PET fiber geometry on the mechanical properties of concrete: An experimental investigation, European Journal of Environmental and Civil Engineering, Vol.-20, Issue No.-7, Page Nos -771-784, 2016.
2. C. Marthong, A. Dutta and S.K Deb, Effect of Cyclic Loading Frequency on the Behaviour of exterior RC Beam-Column Connections, Journal of Earthquake Engineering, Vol.-20, Issue No.-7, Page Nos -1126-1147, 2016.
3. C. Marthong, S.K. Deb and A. Dutta Deb, Effect of loading rates on the behavior of epoxy repaired RC beam-column connections, European Journal of Environmental and Civil Engineering, Issue No.-Accepted, Page Nos -1-26, 2016.
4. C. Marthong, A. S. Sangma, Md. S. A.Choudhury, R. N. Pyrbot, S. L. Tron ,L. Mawroh, G. S. Bharti, Structural Behavior of Recycled Aggregate Concrete Beam-Column Connection in Presence of Micro Concrete at Joint Region, Structures, Elsevier, Vol.-11, Page Nos -243–251, 2017
5. M. L. Patton, K. D. Singh, Buckling of fixed-ended concrete-filled steel columns under axial compression, International Journal of Steel Structures, Springer, Vol.-17(3), 1-13, 2017.
6. Sarmah, R and Barua, G. (2017). “Analysis of three-dimensional transient seepage into ditchdrains from a ponded field.” Sadhana, 42(5), 769–793, 2015
7. D. Podder, A. Gadagi, N. R. Mandal, S. Kumar, L. Singh, and S. Das, Numerical investigation on the effect of thermomechanical tensioning on the residual stresses in thin stiffened panels, Journal of Ship Production and Design, Vol.-33, Issue No.-1, Page Nos -1-11, 2017.
8. A. Gadagi, N. R. Mandal, D. Podder, S. Kumar, Experimental and numerical investigation on the effect of Thermo-Mechanical Tensioning on weld induced out-of-plane distortion, Journal of Ship Production and Design, Issue No.-Accepted, 2017.
9. D. Podder, A. Gadagi, N. R. Mandal, S. Das, In sight of a fillet welded T-joint based on the method of average welding forces, Journal of ship production and design, Vol.-32, Issue No.-4, Page Nos -206-215, 2016.
10. H. M. Kalita, A. K. Sarma, An implicit scheme for shallow water flow with wet dry interface, Water Resources, In press

Computer Science And Engineering


1. A. Datta, S. Ghosh and A. Ghosh, “Unsupervised Band Extraction for Hyperspectral Images using Clustering and kernel Principal Component Analysis “, International Journal of Remote Sensing, Vol. 38, No. 3, pp. 850-873, 2017
2. A. Datta, S. Ghosh and A. Ghosh, “ Supervised Band Extraction of Hyperspectral Images using Partitioned Maximum Margin Criterion”, IEEE Geoscience and Remote Sensing Letters, Vol. 14, No. 1, pp. 82-86, 2017
3. Abhoy Kole, Kamalika Datta, and Indranil Sengupta, “A New Heuristic for N-Dimensional Nearest Neighbor Realization of a Quantum Circuit”, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems (TCAD), DOI: 10.1109/ TCAD.2017.2693284. (To appear)
4. Abhoy Kole, Kamalika Datta, and Indranil Sengupta, “A Heuristic for Linear Nearest Neighbor Realization of Quantum Circuits by SWAP Gate Insertion using N-Gate Lookahead”, IEEE Journal on Emerging and Selected Topics in Circuits and Systems, Vol. 6, No. 1, pp. 62-72, January 2016.
5. B. Paria, S. Pratihar, and P. Bhowmick, On Farey Table and its Compression for Space Optimization with Guaranteed Error Bounds, Mathematics for Applications (published by the Institute of Mathematics, Brno University of Technology, Czech Republic), Vol. 5(2), Pages 123 - 145, 2016.
6. S. Pratihar and P. Bhowmick, On Farey Sequence and its Augmentation for Applications to Image Analysis, International Journal of Applied Mathematics and Computer Science (AMCS), Vol.27(3) , 2017 (to be published).
7. Bhattacharya, A.; Ghosh, S. C.; Sinha, B.P.; Multi-path Routing for Secure Multimedia Com-munication Over Cognitive Radio Networks”, International Journal of Computer Networks and Distributed Systems (Inderscience), to appear.
8. A. Bhattacharya, K. Sinha, An E_cient Protocol for Multipath Load-Balanced Routing in Mobile Ad Hoc Networks”, in Ad Hoc Networks (Elsevier), Vol. 63, pp. 104-114, Aug. 2017.
9. Bhattacharya, K. Sinha, D. Datta, B. P. Sinha, MRBNS: A New Energy-E_cient Communication Scheme in Low Power Wireless Networks”, in International Journal of Sensor Networks (Inderscience), vol. 23 no. 3, pp. 155-169. Apr. 2017.
10. A. Bhattacharya, P. Majumder, K. Sinha, B. P. Sinha, K. V. N. Kavitha, An Energy-E_cient Wireless Communication Scheme using Quint Fibonacci Number System”, in International Journal of Computer Networks and Distributed Systems (Inderscience), vol. 16 no. 2, pp. 140-161, Feb. 2016.
11. B. Nongpoh, R. Ray, S. Dutta, A. Banerjee, AutoSense: A Framework for Automated Sensitivity Analysis of Program Data, IEEE Transactions on Software Engineering, Vol.-To appear, 2017. url: http://nitmeghalaya.in/nitm_web/fp/cse_dept/uploads/ IEEE_TSE_2017.pdf
12. Mohanta, D. K., Murthy, C., & Sinha Roy, D. (2016). A Brief Review of Phasor Measurement Units as Sensors for Smart Grid. Electric Power Components and Systems, 44(4), 411-425,(2016).
13. Reddy, K. Hemant Kumar, Geetika Mudali, and Diptendu Sinha Roy. “A novel coordinated resource provisioning approach for cooperative cloud market.” Journal of Cloud Computing (Springer), 8 :(2017) 6.1.
14. Nalluri, MadhuSudana Rao, K. Kannan, M. Manisha, and Diptendu Sinha Roy. “Hybrid Disease Diagnosis Using Multiobjective Optimization with Evolutionary Parameter Optimization.” Journal of Healthcare Engineering, 2017.

Electrical Engineering


1. Pratap Sekhar Puhan, Pravat Kumar Ray and Gayadhar Panda, “Development of Real Time Implementation of 5/5 Rule based Fuzzy Logic Controller Shunt Active Power Filter for Power Quality Improvement”, Int. J. Emerg. Electr. Power Syst. 2016; 17(6): 607–617.
2. Priyabat Garanayak and Gayadhar Panda, “An adaptive linear neural network with least mean M-estimate weight updating rule employed for harmonics identification and power quality monitoring”, Transactions of the Institute of Measurement and Control, 1–14, 2017.
3. P.S. Puhan, P.K.Ray & G.Panda “A Comparative Analysis of Artificial Neural Network and Synchronous detection Controller to improve power quality in Single Phase System” International Journal of Power Electronics, Inderscience” Accepted, 2017.
4. Smitha Joyce Pinto, Gayadhar Panda, and Rangababu Pessapati “An Implementation of Hybrid Control Strategy for Distributed Generation System Interface Using Xilinx System Generator” IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, accepted, 2017.
5. Moving-Window DFT Based Frequency-Locked Loop for FM Demodulation, IEEE COMMUNICATIONS LETTERS, VOL. 20, NO. 5, MAY 2016.
6. P. P. Singh, J. P. Singh, B. K. Roy, “SMC based Synchronization and Anti- synchronization of Chaotic Systems for Secure Communication and Analog Circuit Realization,” Int. J. Control Theory and Application, Vol. 9, No. 39, pp. 171-183, 2016.
7. P. P. Singh, J. P. Singh, B. K. Roy, “Implementation for Synchronization of Chen and Liu-Yang Chaotic Systems using SMC and Active Control Schemes,” Int. J. Control Theory and Application, Vol. 9, No. 39, pp. 159-169, 2016.
8. P. P Singh, J. P. Singh, and B. K. Roy, “NAC-based Synchronisation and Anti-synchronisation Between Hyperchaotic and Chaotic Systems, Its Analogue Circuit Design and Application,” IETE Journal of Research, 2017. DOI: 10.1080/03772063.2017.1331758
9. M. Ghosh, S. Ghosh, P.K. Saha, G.K. Panda, “Semi-Analytical Dynamic Model of Permanent Magnet Direct Current Brushed Motor Considering Slotting Effect, Commutation and PWM Operated Terminal Voltage”, IEEE Transactions on Industrial Electronics, Vol.-64, Issue No.-4, April, 2017. (Published on 07-Dec-2016).
10. S. Affijulla, P. Tripathy, A Robust Fault Detection and Discrimination Technique for Transmission Lines, IEEE Transactions on Smart Grid, Vol.-PP, Issue No.-99, Page Nos -1-11, 2017.
11. S. Affijulla, P. Tripathy, Development of Phasor Estimation Algorithm for P-Class PMU Suitable in Protection Applications, IEEE Transactions on Smart Grid, Vol.-PP, Issue No.-99, Page Nos -1-10, 2016.
12. Palash Pal, Debabrata Roy, Avik Datta, Pradip K. Sadhu, Atanu Banerjee “ A Closed-loop power controller model of seriesresonant-inverter-fitted induction heating system” – Archives of Electrical Engineering ,Vol.65 ,No.4 ,December , 2016, pp.827-841.
13. Chiranjit Sain, Atanu Banerjee, P K Biswas, “Comparative Performance Study for Closed Loop Operation of an Adjustable Speed Permanent Magnet Synchronous Motor Drive with Different Controllers”- International Journal of Power Electronics and Drive Systems (IJPEDS), Vol.7, No.4, December, 2016, pp. 1089-1098.
14. Agamani Chakraborty, Debabrata Roy, Pradip Kr Sadhu, Ankur Ganguly, Atanu Banerjee “An Interference of High Frequency Series Resonant Inverter in Domestic Induction Heater Estimation in Emission Control Using FEM ”- Journal of Power Technologies, accepted & will be published.
15. Kaushik Neogi , Pradip K Sadhu, Atanu Banerjee, “A review work on high frequency Induction curing of porous asphalt concrete”- International Journal of Power Electronics and Drive Systems (IJPEDS), Vol.7, No.3, September,2016, pp.872- 879.
16. R. Roy, A. Dalal, P. Kumar, Prediction of High Frequency Core Loss for Electrical Steel Using the Data Provided by Manufacturer, Journal of magnetism and magnetic materials, Vol.-410, Page Nos -248-256, 2016.
17. Sanjoy Debbarma, Arunima Dutta, “Utilizing Electric Vehicles for LFC in Restructured Power Systems using Fractional Order Controller”, IEEE Transactions on Smart Grid, 2016. DOI: 10.1109/TSG.2016.2527821

Electronics & Communication Engineering


1. S. Mishra, T. V. Mahendra, and A. Dandapat, “ A 9-T 833-MHz 1.72-fJ/bit/search quasi static ternary fully associative cache tag with selective matchline evaluation for wire speed applications,” IEEE Transactions on Circuits and Systems I: Regular Papers, Vol.-63, Issue No.-11, pp. 1910-1920, 2016.
2. V. Kumar and A. Dandapat, “Design Methodology for Multiple Output Combinational Circuits Using Cyclic Combinational Technique,” Journal of Circuits, Systems, and Computers, Vol.-25, Issue No.-12, pp. 120, 2016.
3. V. Kumar, C. K. Jha, G. Thapa, and A. Dandapat, “ A Novel Methodology for Design of Cyclic Combinational Circuits,” Journal of Low Power Electronics, Vol.-12, pp. 113, 2016.
4. S. Mishra and A. Dandapat, “EMDBAM: A Low Power Dual Bit Associative Memory with Match Error and Mask Control,” IEEE Transactions on Very Large Scale Integration Systems, Vol.-24, Issue No.-6, pp. 21422151, 2016.
5. A. Sarkhel and S. R. B. Chaudhuri, “Enhanced-gain printed slot antenna using an electric meta surface superstrate,” Springer: Applied Physics, Vol.-122, Issue No.-10, pp. 122-934, 2016.
6. A. Shadap and P. Saha “Discrete Fourier transformation processor based on complex radix (1 + j) number system,” Engineering Science and Technology, an International Journal (Elsevier), Accepted 2016.
7. S. Mishra and A. Dandapat, “Energy-efficient adaptive match-line controller for large-scale associative storage,” IEEE Transactions on Circuits and Systems II: Express Briefs, Vol.-64, Issue No.-6, pp. 710-714, 2017.
8. T. V. Mahendra, S. Mishra, and A. Dandapat, “Self controlled high performance pre-charge free content addressable memory,” IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol.-25, Issue No.-8, pp. 2388-2392, 2017.
9. V. A. Kumar, Ch. V. R. Rao, and A. Dutta, “Performance analysis of blind source separation using canonical correlation,” in Springer, Circuits, Systems, and Signal Processing, DOI: 10.1007/s00034-017-0566-x , 2017.
10. V. A. Kumar and Ch. V. R. Rao, “Unsupervised noise removal technique based on constrained NMF,” in IET Signal Processing, http://dx.doi.org/10.1049/ietspr.2016.041 4, Online ISSN 1751-9683, 2017.
11. S. J. Pinto, G. Panda and P. Rangababu, “An Implementation of Hybrid Control Strategy for Distributed Generation System Interface Using Xilinx System Generator, ”IEEE Transactions on Industrial Informatics, Accepted, 2017.
12. K. K. Anumandla, P. Rangababu and S. L. Saba, “Hardware Implementation of Multi-Objective Differential Evolution algorithm: A Case Study of Spectrum Allocation in Cognitive Radio Networks,” International Journal of Innovative Computing and Applications (Inderscience), pp. 1-10, 2017.
13. P. Saha and D. Kumar “A new algorithm for the Computation of the Decimals of the Inverse,” Computer Science & Engineering and Electrical Engineering, ScientiaIranica, vol. 24, Issue no. 3, pp. 1363-1372, 2017.
14. S. D. Thabah, M. Sonowal and P. Saha, “Experimental Studies on Multi0Operand Adders” Int. J. of Smart Sensing and Intelligent System, vol. 10, Issue no. 2, 2017, pp. 327-340, June 2017.
15. D. Kumar, P. Saha, A. Dandapat, “Rigorous hardware implementation of methodologies of fixed point division algorithms”Int. J. of Smart Sensing and Intelligent System, Accepted 2017.

Mechanical Engineering


1. J. P. Panda, H. V. Warrior, S. Maity, A. Mitra, K. Sasmal, An improved model including length scale anisotropy for the pressure strain correlation of turbulence, Journal of Fluids Engineering, Vol.-139, Issue No.-4, Page Nos -044503-1 to 6, 2017.
2. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedláek, P. Šajgalík, Machinability analysis of multi walled carbon nanotubes filled alumina composites in Wire Electrical Discharge Machining process, Journal of the European Ceramic Society, Elsevier, Vol.-37, Page Nos -3107-3114, 2017.
3. C. Marthong, D.K. Sarma, Influence of PET fiber geometry on the mechanical properties of concrete: an experimental investigation, European Journal of Environment and Civil Engineering, Taylor and Francis, Vol.-20, Issue No.-7, Page Nos -771-784, 2016.
4. C. Marthong, D.K. Sarma, Flexural behavior of ferrocement plates incorporating steel and PET fibers, Materials and Construction Technologies for Sustainable Development, Key Engineering Materials, Trans Tech Publication, Vol.-666, Page Nos -97-106, 2016.
5. R. Kalidasan, M.Yatin, D.K.Sarma, S.Senthilvelan, U.S. Dixit, An experimental study of cutting forces and temperature in multi-tool turning in grey cast iron, International Journal of Machining and Machinability of Materials,Inderscience, Vol.-18, Issue No.-5/6, Page Nos -540-541, 2016.
6. R. S. Das, S. Jain, Experimental investigations on a solar assisted liquid desiccant cooling system with indirect contact dehumidifier, Solar Energy, Vol.-153, Page Nos -289-300, 2017
7. K. Debnath, I. Singh, and A. Dvivedi, On the Analysis of Force During Secondary Processing of Natural Fiber Reinforced Composite Laminates,Polymer Composites, Vol.-38, Issue No.-1, Page Nos -164-174, 2017.
8. P.K. Bajpai, K. Debnath, and I. Singh, Hole Making in Natural Fiber-Reinforced Polylactic Acid Laminates: An Experimental Investigation, Journal of Thermoplastic Composite Materials, Vol.-30, Issue No.-1, Page Nos -30-46, 2017.
9. K. Debnath and I. Singh, Low-Frequency Modulation-Assisted Drilling of Carbon-Epoxy Composite Laminate, Journal of Manufacturing Processes, Vol.-25, Page Nos -262-273, 2017.
10. V. Dhawan, K. Debnath, I. Singh, and S. Singh, A Novel Intelligent Software-based Approach to Predict Forces and Delamination during Drilling of Fiber-Reinforced Plastics, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Vol.-230, Issue No.-2, Page Nos -603-614, 2016.
11. K. Debnath, A. Sisodia, A. Kumar, and I. Singh, Damage-Free Hole Making in Fiber-Reinforced Composites: An Innovative Tool Design Approach,Materials and Manufacturing Processes, Vol.-31, Issue No.-10, Page Nos -1400-1408, 2016.
12. V. Dhawan, K. Debnath, I. Singh, and S. Singh, Prediction of Forces during Drilling of Composite Laminates Using Artificial Neural Network: A New Approach, FME-Transactions, Vol.-44, Issue No.-1, Page Nos -36-42, 2016.
13. A.V. Singhal, K. Debnath, I. Singh, and B.S.S. Daniel, Critical Parameters Affecting Mechanical Behavior of Natural Fiber Reinforced Plastics,Journal of Natural Fibers, Vol.-13, Issue No.-6, Page Nos -640-650, 2016.
14. K. Debnath, I. Singh, and T.S. Srivatsan, An Innovative Tool for Engineering Good Quality Holes in Composite Laminates, Materials and Manufacturing Processes, 2016.
15. M. Rahang, P. K. Patowari, Parametric Optimization for Selective Surface Modification in EDM using Taguchi Analysis, Materials and Manufacturing Processes, Vol.-31, Issue No.-4, Page Nos -422-431, 2016.
16. T. Bose, A. R. Mohanty, Large amplitude axisymmetric vibration of a circular plate having a circumferential crack, Journal of Mechanical Sciences, Vol.-124, Page Nos -194–202, 2017.
17. T. Bose, A. R. Mohanty, Detection and monitoring of side crack in a rectangular plate using mobility, Journal of Vibration and Control, Vol.-22, Issue No.-2, Page Nos -585-594, 2016.

Chemical & Biological Sciences


1. Pradhan, M.; Song, I.; Lee, J.; Lee, M.; Park, C and Choi, H. C. “Large-area two dimensional bismuth selenide crystals synthesized by solution-based control of the nucleation environment”. RSC Adv. 2016, 6, 106960.
2. A. K. Paul and W. L. Hase, “A Zero Point Energy Constraint for Unimolecular Dissociation Reactions. Giving Trajectories Multiple Chances to Dissociate Correctly”, J Phys. Chem. A. 120, 372 (2016).
3. H. Kim, A. K. Paul, S. Pratihar, and W. L. Hase “Chemical Dynamics Simulations of Intermolecular Energy Transfer: Azulene + N2 Collisions”, J. Phys. Chem. A 120, 5187-5196 (2016.
4. A. K. Paul, D. Donzis, and W. L. Hase “ Collisional Intermolecular Energy Transfer From a N2 Bath at Room Temperature to a Vibrationlly “Cold” C6F6 Molecule Using Chemical Dynamics Simulations”, J. Phys. Chem. A, 121, 4049-4057 (2017).
5. Shanshan Chen, Yujin An, Gitish K Dutta, Yiho Kim, Zhi Guo Zhang, Yongfang Li, Changduk Yang “A Synergetic Effect of Molecular Weight and Fluorine in All Polymer Solar Cells with Enhanced Performance”, Advanced Functional Materials 2016.
6. So-Huei Kang, Hae Rang Lee, Gitish K Dutta, Junghoon Lee, Joon Hak Oh, Changduk Yang, “A Role of Side-Chain Regiochemistry of Thienylene–Vinylene–Thienylene (TVT) in the Transistor Performance of Isomeric Polymers” Macromolecules 50 (3), 884- 890, 2017.

Humanities & Social Sciences


1. P. S. Mangang. The Socio-Critical Plays of Henrik Ibsen and their Reception. The Criterion: An International Journal in English, Vol. 8, Issue 2, April 2017. pp 1127-1133.
2. Sarma, I. and Sarma, A. D. (2016), “Emergence of Viral Stealth Marketing in Online Social Networks”, Spectrum: An International Journal of Humanities and Social Sciences, Vol. 04, Issue No. 02, pp. 141 – 147

Mathematics


1. Tikaram Subedi and A.M Buhphang, On left SF-rings and strongly regular rings, Kyungpook Mathematical Journal, Vol.-56, Issue No.-3, Page Nos -861-866, 2016.
2. S. Dey, E. Raheem, S. Mukherjee, H. K. T. Ng, Two parameter exponentiated Gumbel distribution: properties and estimation with flood data example, Journal of Statistics &Management Systems, Vol.-20, Issue No.-2, Page Nos -197-233, 2017. http://dx.doi.org/10.1080/09720510.2016.1228261.
3. S. Dey, E. Raheem, S. Mukherjee, Statistical Properties and Different Methods of Estimation of Transmuted Rayleigh Distribution, Revista Colombiana de Estadística, Vol.-40, Issue No.-1, Page Nos -165-203, 2017. http://dx.doi.org/10.15446/ rce.v40n1.5615.
4. B. Ghosh, D. Pal, T. K. Kar, J. C. Valverde, Biological Conservation through Marine Protected Areas in the Presence of Alternative Stable States, MATHEMATICAL BIOSCIENCES (Elsevier) , Vol.-286, Page Nos -49-57, 2017.
5. J. Srinivas, J.V. Ramana Murthy, A.J. Chamkha, “Analysis of Entropy Generation in an Inclined Channel Flow Containing Two Immiscible Micropolar Fluids Using HAM”, International Journal of Numerical Methods for Heat and Fluid Flow, 23(3/4) (2016) 1027-1049. (Emerald Science) DOI: http://www.emeraldinsight.com/doi/pdfplus/10.1108/HFF-09-2015-0354.
6. J. Srinivas, G. Nagaraju, O.A. Beg, “Mathematical Modeling of Entropy Generation in Magnetized Micropolar flow between co-rotating Cylinders with Internal Heat Generation”, Alexandria Engineering Journal,55(3)(2016)1969–1982.(Elsevier DOI: http://www.sciencedirect.com/science/article/pii/S1110016816301946.
7. J. Srinivas, J.V. Ramana Murthy, O.A. Beg, “Entropy Generation Analysis of Radiative Heat Transfer Effects on Channel flow of two Immiscible Couple Stress Fluids”, Journal of the Brazilian Society of Mechanical Sciences and Engineering,39(6) (2017) 2191-2202. (Springer) DOI: https://link.springer.com/article/10.1007/s40430-017-0752-6.
8. G. Nagaraju, J. Srinivas, J.V. Ramana Murthy, A.M. Rashad, “Entropy Generation Analysis of the MHD Flow of Couple Stress Fluid between Two Concentric Rotating Cylinders with Porous Lining”, Heat Transfer - Asian Research, 46(4) (2017) 316-- 330. (Wiley) DOI: http://onlinelibrary.wiley.com/doi/10.1002/htj.21214/abstract.
9. S.O. Adesanya, J.A. Falade, J. Srinivas, O.A. Beg, “Irreversibility Analysis for Reactive Third-Grade Fluid Flow and Heat Transfer with Convective Wall Cooling”, Alexandria Engineering Journal, 56(1) (2017) 153-160. (Elsevier) DOI: http://www. sciencedirect.com/science/article/pii/S1110016816302848
10. J. Srinivas, S.O. Adesanya, J.A. Falade, G. Nagaraju, “Entropy Generation Analysis for a Radiative Micropolar Fluid Flow Through a Vertical Channel Saturated with Non-Darcian Porous Medium”, International Journal of Applied and Computational Mathematics, (Accepted) (Springer). DOI: https://link.springer.com/article/10.1007/s40819-017-0322-8.
11. N. Jana & S. Kumar (2017). Classification into two normal populations with a common mean and unequal variances. Communication in Statistics-Simulation and Computation. Vol.46, No.1, pp.546-558. Publisher: Taylor and Francis http:// www.tandfonline.com/doi/abs/10.1080/03610918.2014.970697.
12. N. Jana, S. Kumar & K. Chatterjee (2016). Bayes estimation for exponential distributions with common location parameter and applications to multi-state reliability models. Journal of Applied Statistics. Vol.43, No.15, pp.2697–2712. Publisher: Taylor and Francis http://www.tandfonline.com/doi/abs/10.1080/02664763.2016.1142950?journalCode=cjas20.

Physics


1. SP Choudhury, A Bhattacharjee, Sensing of 0.1 ppm of methanol, ethanol, and propanol vapors at 130° C by SnO2 thin film, Particulate Science and Technology 35 (3), 314-321, 2017.
2. D Bhattacharjee, PR Alapati, A Bhattacharjee, Electrical properties of interdigitated partially bent like shaped liquid crystalline compound, Molecular Crystals and Liquid Crystals 648 (1), 66-76, 2017.
3. K Thingujam, A Bhattacharjee, B Choudhury, PR Alapati, Optical parameter measurements of a nO. m liquid crystalline compound, Indian Journal of Pure & Applied Physics (IJPAP) 55 (4), 269-274, 2017.
4. B Gogoi, KN Singh, R Mishra, TK Ghosh, A Bhattacharjee, PR Alapati, Study of dielectric properties and the molecular dynamics using Raman spectroscopy in pure and nanoparticle doped liquid crystal compound, 6O. 4, Molecular Crystals and Liquid Crystals 646 (1), 3-13, 2017.
5. SP Choudhury, K Bhattacharya, N Kumari, A Ghosh, A Bhattacharjee, Impedance Spectroscopy of Fe-Doped SnO, Nanoscience and Nanotechnology 17, 1-8, 2017.
6. Spectral Anomaly in Raman Scattering from p-Type Silicon Nanowires, Priyanka Yogi, Deepika Poonia, Suryakant Mishra, Shailendra Saxena, Swarup Roy, Vivek Kumar, Pankaj R. Sagdeo and Rajesh Kumar, Journal of Physical Chemistry C 121,.
7. Fano Scattering: Manifestation of Acoustic Phonons at Nanoscale, Priyanka Yogi, Suryakant Mishra, Shailendra K. Saxena, Vivek Kumar and Rajesh Kumar, Journal of Physical Chemistry Letters 7, 5291 (2016).
8. Enhanced third harmonic generation in air by two-colour ultrashort laser pulses, A Nath, JA Dharmadhikari, D Mathur, AK Dharmadhikari, Applied Physics B 122, 248, (2016).
9. Particle dynamics in a symmetrically driven underdamped inhomogeneous periodic potential system, D. Kharkongor, W. L. Reenbohn and, Mangal C. Mahato, Phys. Rev. E 94, 022148 (2016).
10. K. Thingujam, A. Bhattacharjee, B. Choudhury, R. Dabrowski, Nematic liquid crystals exhibiting high birefringence, Optical Review, Vol.-23, Issue No.-3, Page Nos -409-19, 2016.
11. S. P. Choudhury, A. Bhattacharjee, Sensing of 0.1 ppm of methanol, ethanol, and propanol vapors at 130° c by SnO2 thin film, Particulate Science and Technology, Vol.-Accepted, 2016.
12. D. Bhattacharjee, S. Paul. Choudhury, P. R. Alapati, A. Bhattacharjee, Dielectric relaxation and birefringence study of 7. O5O. 7 dimeric liquid crystal compound, International conference on condensed matter and applied physics (icc 2015) AIP, Vol.-1728, Issue No.-020155, 2016.
13. D. Bhattacharjee, S. P. Choudhury, A. Bhattacharjee, Correlation between the density and refractive index with higher homologues 5O. m series, Molecular Crystals and Liquid Crystals, Vol.-631, Issue No.-1, Page Nos -69-73, 2016.
14. D. Bhattacharjee, P. R. Alapati, A. Bhattacharjee, Negative Birefringence in the Higher Homologues of 5O. m Series of Liquid Crystals, The Journal of Physical Chemistry B, Vol.-120, Issue No.-27, Page Nos -6747–6753, 2016.
15. K. Thingujam, A. Bhattacharjee, B. Choudhury, S. D. Sarkar, Optical studies of a binary liquid crystal mixture exhibiting induced smectic A phase, Applied Physics A, Vol.-122, Issue No.-8, Page Nos -1-10, 2016.
16. D. Bhattacharjee, P. R. Alapati, A. Bhattacharjee, Negative optical anisotropic behaviour of two higher homologues of 5O. m series of liquid crystals, Journal of Molecular Liquids, Vol.-222, Page Nos -55-60, 2016.
17. S. P. Choudhury, S. D. Gunjal, N. Kumari, K. D. Diwate, K. C. Mohite, A. Bhattacharjee, Facile synthesis of SnO 2 thin film by spray pyrolysis technique, investigation of the structural, optical, electrical properties, Materials Today: Proceedings, Vol.-3, Issue No.-6, Page Nos -1609-1619, 2016.
18. D. Bhattacharjee, P. R. Alapati, A. Bhattacharjee, Molecular polarization, order parameter and dielectric study of a dimeric compound, Journal of Molecular Liquids, Vol.-224, Page Nos -507-514, 2016. Conference
19. Particle transport in a noisy symmetrically driven underdamped inhomogeneous sinusoidal potential system, D. Kharkongor, W. L. Reenbohn and Mangal C. Mahato, Xth PANE Biennial Proceedings (2016).
20. Particle dynamics in a symmetrically driven underdamped inhomogeneous periodic potential system, D. Kharkongor, S. Saikia, A. M. Jayannavar, Mangal C. Mahato, and W. L. Reenbohn, AIP Conference Proceedings 1832, 110023 (2017).
21. SP Choudhury, A Bhattacharjee, Sensing of 0.1 ppm of methanol, ethanol, and propanol vapors at 130° C by SnO2 thin film, Particulate Science and Technology 35 (3), 314-321, 2017.
22. D Bhattacharjee, PR Alapati, A Bhattacharjee, Electrical properties of interdigitated partially bent like shaped liquid crystalline compound, Molecular Crystals and Liquid Crystals 648 (1), 66-76, 2017.
23. K Thingujam, A Bhattacharjee, B Choudhury, PR Alapati, Optical parameter measurements of a nO. m liquid crystalline compound, Indian Journal of Pure & Applied Physics (IJPAP) 55 (4), 269-274, 2017.
24. B Gogoi, KN Singh, R Mishra, TK Ghosh, A Bhattacharjee, PR Alapati, Study of dielectric properties and the molecular dynamics using Raman spectroscopy in pure and nanoparticle doped liquid crystal compound, 6O. 4, Molecular Crystals and Liquid Crystals 646 (1), 3-13, 2017.
25. SP Choudhury, K Bhattacharya, N Kumari, A Ghosh, A Bhattacharjee, Impedance Spectroscopy of Fe-Doped SnO, Nanoscience and Nanotechnology 17, 1-8, 2017.
26. Spectral Anomaly in Raman Scattering from p-Type Silicon Nanowires, Priyanka Yogi, Deepika Poonia, Suryakant Mishra, Shailendra Saxena, Swarup Roy, Vivek Kumar, Pankaj R. Sagdeo and Rajesh Kumar, Journal of Physical Chemistry C 121,.
27. Fano Scattering: Manifestation of Acoustic Phonons at Nanoscale, Priyanka Yogi, Suryakant Mishra, Shailendra K. Saxena, Vivek Kumar and Rajesh Kumar, Journal of Physical Chemistry Letters 7, 5291 (2016).
28. Enhanced third harmonic generation in air by two-colour ultrashort laser pulses, A Nath, JA Dharmadhikari, D Mathur, AK Dharmadhikari, Applied Physics B 122, 248, (2016).
29. Particle dynamics in a symmetrically driven underdamped inhomogeneous periodic potential system, D. Kharkongor, W. L. Reenbohn and, Mangal C. Mahato, Phys. Rev. E 94, 022148 (2016).
30. K. Thingujam, A. Bhattacharjee, B. Choudhury, R. Dabrowski, Nematic liquid crystals exhibiting high birefringence, Optical Review, Vol.-23, Issue No.-3, Page Nos -409-19, 2016.
31. S. P. Choudhury, A. Bhattacharjee, Sensing of 0.1 ppm of methanol, ethanol, and propanol vapors at 130° c by SnO2 thin film, Particulate Science and Technology, Vol.-Accepted, 2016.
32. D. Bhattacharjee, S. Paul. Choudhury, P. R. Alapati, A. Bhattacharjee, Dielectric relaxation and birefringence study of 7. O5O. 7 dimeric liquid crystal compound, International conference on condensed matter and applied physics (icc 2015) AIP, Vol.-1728, Issue No.-020155, 2016.
33. D. Bhattacharjee, S. P. Choudhury, A. Bhattacharjee, Correlation between the density and refractive index with higher homologues 5O. m series, Molecular Crystals and Liquid Crystals, Vol.-631, Issue No.-1, Page Nos -69-73, 2016.
34. D. Bhattacharjee, P. R. Alapati, A. Bhattacharjee, Negative Birefringence in the Higher Homologues of 5O. m Series of Liquid Crystals, The Journal of Physical Chemistry B, Vol.-120, Issue No.-27, Page Nos -6747–6753, 2016.
35. K. Thingujam, A. Bhattacharjee, B. Choudhury, S. D. Sarkar, Optical studies of a binary liquid crystal mixture exhibiting induced smectic A phase, Applied Physics A, Vol.-122, Issue No.-8, Page Nos -1-10, 2016.
36. D. Bhattacharjee, P. R. Alapati, A. Bhattacharjee, Negative optical anisotropic behaviour of two higher homologues of 5O. m series of liquid crystals, Journal of Molecular Liquids, Vol.-222, Page Nos -55-60, 2016.
37. S. P. Choudhury, S. D. Gunjal, N. Kumari, K. D. Diwate, K. C. Mohite, A. Bhattacharjee, Facile synthesis of SnO 2 thin film by spray pyrolysis technique, investigation of the structural, optical, electrical properties, Materials Today: Proceedings, Vol.-3, Issue No.-6, Page Nos -1609-1619, 2016.
38. D. Bhattacharjee, P. R. Alapati, A. Bhattacharjee, Molecular polarization, order parameter and dielectric study of a dimeric compound, Journal of Molecular Liquids, Vol.-224, Page Nos -507-514, 2016. Conference
39. Particle transport in a noisy symmetrically driven underdamped inhomogeneous sinusoidal potential system, D. Kharkongor, W. L. Reenbohn and Mangal C. Mahato, Xth PANE Biennial Proceedings (2016).
40. Particle dynamics in a symmetrically driven underdamped inhomogeneous periodic potential system, D. Kharkongor, S. Saikia, A. M. Jayannavar, Mangal C. Mahato, and W. L. Reenbohn, AIP Conference Proceedings 1832, 110023 (2017).

Civil Engineering


1. H. M. Kalita, A. K. Sarma, Numerical simulation of open channel flow over undulated and dry bed, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Period -15-17 December, Place -MNNIT Allahabad, 2016.
2. H. M. Kalita, A semi implicit finite difference model for dam break flow simulation over complex river bed, National Conference on Hydrology and Watershed Management (NCHWM-2017), Period -24-25 March, Place -NIT Silchar, 2017.
3. Sahoo, S., Manna, B. and Sharma, K. G. (2016). “Seismicstabilityanalysis of Un-reinforced and reinforcedsoilslopes.” Geo China, Shandong, China, July 25-27.
4. Sahoo, S., Manna, B. and Sharma, K. G. (2016). “Seismic stability analysis of a steep soil slope: with and without nailing.” 6thInternational Conference on Recent Advances in Geotechnical Earthquake Engineering & Soil Dynamics 2016, IIT RoorkeeGreaterNoida campus, GreaterNoida (NCR) India, August 1-6.
5. Susmita Sharma, Pankaj Pathak (2017) “Categorization of Biosolids, A Vital Biological Resource for Sustainable Agriculture” Paris France May 18-19, 2017, 19 (5) Part XII. 19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.
6. Pankaj Pathak, Susmita Sharma (2017) “Study of Strontium Sorption onto Indian Bentonite” Paris France May 18-19, 2017, 19 (5) Part XII.19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.
7. Jaswanth G., Kumar S., and Sharma H., “Impact testing Facility: BHISM for Performance based Blast Resistant Design of Reinforced Concrete (RC) Structures”, Procedia Engineering, 173, pp563 – 569, 2017.
8. Chakraborty, R. and Dey, A. (2016) “Effect of toe cutting on hillslope stability” Geotechnology Towards Global Standards, Indian Geotechnical Conference, IGC 2016 Department of Civil Engineering, IIT Madras, India, pp. 4-1.
9. Chakraborty, R. and Dey, A. (2016) “Stability of hill-slope using LE and FE analyses” National Conference on Engineering Problems and Application of Mathematics: EPAM 2016 , NIT Agartala, Tripura, India, pp. 5-1.
10. Chakraborty, R. and Dey, A. (2016) “Multiple nonlinear regression analysis for slope stability using limit equilibrium method” International Geotechnical Engineering Conference on Sustainability in Geotechnical Engineering Practices and Related Urban Issues, Mumbai, India, pp. 1-3.
11. Chakraborty, R. and Dey, A. (2016) “Multiple nonlinear regression analysis for slope stability using limit equilibrium method” International Geotechnical Engineering Conference on Sustainability in Geotechnical Engineering Practices and Related Urban Issues, Mumbai, India, pp. 1-3.
12. Chakraborty R. and Dey A. (2016) “Numerical investigation of slope instability induced by hydraulic and seismic actions” North-East Students Geo-Congress: NESGC 2016, Agartala, India, pp. 237-244.

Computer Science And Engineering


1. D. Das, and A. Chakrabarty, “Emotion Recognition from Face Dataset Using Deep Neural Nets,” in IEEE International Symposium on INnovations in Intelligent SysTems and Applications 2016 (INISTA 2016), Sinaia, Romania, IEEE Publications, 2016, pp. 1-6.
2. P. M. N. Rani, A. Kole, K. Datta, and A. Chakrabarty, “Realization of Ternary Reversible Circuits Using Improved Gate Library,” in 6th International Conference on Advances in Computing & Communications (ICACC-2016), Kochi, Kerala, India, Elsevier, 2016, Vol. 93, pp. 153-160.
3. D. Das, and A. Chakrabarty, “Human Gait Recognition using Deep Neural Networks,” Proc. 2nd International Conference on ICT for Competitive Strategies (ICTCS 2016), Computer Society of India Udaipur, India, ACM - ICPS, 2016, pp. 132:1--132:6.
4. A. Chakrabarty, and N. Das, “Assessment of values of time-domain and frequency domain parameters for ECG signals through HRV analysis using Symlets for Arrhythmia prediction,” in Advances in Computational Intelligence: Proc. International Conference on Computational Intelligence 2015, BIT Mesra, Ranchi, India, Springer, 2016, pp. 439-447.
5. Akhilendra Pratap Singh, Ujwal Kumar Singh; Amit Kumar;”User centric android application for future world; SyncApp”, IEEE International Conference on Computational Intelligence and Computing Research (ICCIC), Period -15-17 Dec, Place -Chennai, Page -1-5, 2016.
6. AbhoyKole, P. Mercy Nesa Rani, KamalikaDatta, IndranilSengupta, and Rolf Drechsler, “Exact Synthesis of Ternary Reversible Functions using Ternary Toffoli Gates”, IEEE International Symposium on Multiple Valued Logic (ISMVL), pp. 179-184, Novi Sad, Serbia, May 22-24, 2017.
7. AbhoyKole, Robert Wille, KamalikaDatta, and IndranilSengupta, “Test Pattern Generation Effort Evaluation of Reversible Circuits”, ”, 9th International Conference on Reversible Computation, pp. 162-175, Kolkata, India, July 6-7, 2017.
8. P. Mercy Nesa Rani, AbhoyKole, Kamalika Datta, and IndranilSengupta, “Improved Decomposition of Multiple-Control Ternary Toffoli Gates using Muthukrishnan-Stroud Quantum Gates”, 9th International Conference on Reversible Computation, pp. 202-213, Kolkata, India, July 6-7, 2017.
9. Leniency Marbaniang, AbhoyKole, Kamalika Datta, and IndranilSengupta, “Design of Efficient Quantum Circuits using Nearest Neighbor Constraint in 2D Architecture”, 9th International Conference on Reversible Computation, pp. 248-253, Kolkata, India, July 6-7, 2017.
10. AbhoyKole, and Kamalika Datta, “Improved NCV Gate Realization of Arbitrary Size Toffoli Gates”, 30th International Conference on VLSI Design (VLSID), pp. 289-294, Hyderabad, India, January 7-11, 2017.
11. Phrangboklang L. Thangkhiew, Rahul Gharpinde, Varun C. Paturi, Kamalika Datta, and IndranilSengupta, “Area Efficient Implementation of Ripple Carry Adder using Memristor Crossbar Arrays”, 11th International Design and test Symposium (IDT), pp. 142-147, Hammamet, Tunisia, December 18-20, 2016.
12. F. Lalchhandama, Brojo Gopal Sapui, and Kamalika Datta, “An Improved Approach for the Synthesis of Boolean Functions using Memristor based IMPLY and INVERSE-IMPLY Gates”, IEEE Computer Society Annual Symposium on VLSI (ISVLSI), pp. 319-324, Pittsburgh, USA, July 11-13, 2016.
13. A.P.S. Thengal, N. Rastogi, A. Medhi, R. Shrivastava, and Kamalika Datta, “Parameter Sensing and Object Tracking using Global Positioning Sysytem”, 6th International Symposium on Embedded Computing and System Design (ISED), pp. 289- 293, IIT Patna, December 15-17, 2016.
14. Suchisman Burman, KamalikaDatta, Robert Wille, IndranilSengupta, and Rolf Drechsler, “An Improved Gate Library for Logic Synthesis of Optical Circuits”, 6th International Symposium on Embedded Computing and System Design (ISED), pp. 1-6, IIT Patna, December 15-17, 2016.
15. M. Ajij, S. Pratihar, K. Ganguly, Detection and Retargeting of Emphasized Text for Content Summarization, 5th Intl. Conf. on Advances in Computing, Communications and Informatics (ICACCI), Period -21-24 September, Place -LNMIIT, Jaipur, Pages -15-21, 2016.
16. M. Ajij and S. Pratihar, Quasi-straightness based Features for Off-line Verification of Signatures, International Conference on Identity, Security and Behavior Analysis (ISBA), Period -February 22-24, Pages 1-7, Place -IIIT, New Delhi, 2017.
17. C. Lalengmawia, A. Bhattacharya, A. Datta, Image Stenography using Advanced Encryption Standard for implantation of Audio/Video Data, to appear in Proc. International Conference on Recent Trends in Information Technology (IEEE ICRTIT), 8-9 Apr. 2016.
18. K. Sinha, B. Gupta, S. Rahimi, A. Bhattacharya, Candidate Core Selection for Load-BalancedMulticore Shared Tree Multicasting”, in Proc. International Conference on Recent Advances in Information Technology (IEEE RAIT), 3-5 Mar. 2016.
19. A. Bhattacharya, S. Audhya, K. Sinha, An Anti-Jamming Protocol Based on Secret Reallocation of Channels”, in Proc. International Conference on Recent Advances in Information Technology (IEEE RAIT), 3-5 Mar. 2016.
20. L. Bu, R. Ray, S. Schupp, ARCH-COMP17 Category Report: Bounded Model Checking of Hybrid Systems with Piecewise Constant Dynamics,ARCH17. 4th International Workshop on Applied Verification of Continuous and Hybrid Systems, Period -April, Place -Pittsburgh, USA, Page -134-142, 2017. https://easychair.org/publications/paper/352479
21. M. Althoff, S. Bak, D. Cattaruzza, X. Chen, G. Frehse, R. Ray, S. Schupp, ARCH-COMP17 Category Report: Continuous and Hybrid Systems with Linear Continuous Dynamics, ARCH17. 4th International Workshop on Applied Verification of Continuous and Hybrid Systems, Period -April, Place -Pittsburgh, USA, Page -143-159, 2017. https://easychair.org/ publications/paper/352651
22. A. Gurung, A. Deka, E. Bartocci, S. Bogomolov, R. Grosu, R. Ray, Parallel Reachability Analysis for Hybrid Systems, MEMOCODE, Period -Nov 18-20, Place -IIT Kanpur, India, 2016. http://ieeexplore.ieee.org/document/7797741/
23. Behera, Ranjit Kumar, K. Reddy, and Diptendu Sinha Roy. “Reliability Assessment of Energy Monitoring Service for a Futuristic Smart City.” In Proceedings of the Second International Conference on Information and Communication Technology for Competitive Strategies, p. 59. ACM, 2016.
24. Behera, Snehasree, K. Reddy, and Diptendu Sinha Roy. “A Critical Assessment of ICT Infrastructures for Certain Demand Response Applications in Smart Grid.” In Proceedings of the Second International Conference on Information and Communication Technology for Competitive Strategies, p. 12. ACM, 2016.
25. 25) Reddy, K., Geetika Mudali, and Diptendu Sinha Roy. “Energy Aware Heuristic Scheduling of Variable Class Constraint Resources in Cloud Data Centres.” In Proceedings of the Second International Conference on Information and Communication Technology for Competitive Strategies, p. 13. ACM, 2016.
26. Behera, Snehasree, Bhawani Shankar Pattnaik, Motahar Reza, and D. S. Roy. “Predicting Consumer Loads for Improved Power Scheduling in Smart Homes.” In Computational Intelligence in Data Mining—Volume 2, pp. 463-473. Springer, New Delhi, 2016.

Electrical Engineering


1. Bonu Ramesh Naidu, Gayadhar Panda and R Ganesh, “Modelling and Hardware-in-Loop Validation of a Modified Controller for Intermittent Operation of a Standalone Low Voltage DC Fuel Cell System”, in IEEE International Conference TENCON, 2016.
2. Satabdy Jena, Gayadhar Panda and Rangababu Peesapati, “Investigation on FPGA based Passive Anti-Islanding Protection Schemes for Grid Interfaced Distributed Generation System”, in IEEE International Conference TENCON, 2016.
3. Smitha Joyce Pinto and Gayadhar Panda, “Power Quality Analysis in a Grid Connected PV System Employing a Hybrid Technique Based on Fractional Wavelet Transform”, in IEEE International Conference TENCON, 2016.
4. Santanu Kumar Dash, Pravat Kumar Ray and Gayadhar Panda, “DS1103 Real-Time Operation and Control of Photovoltaic Fed Unified Power Quality Conditioner”, in IEEE International Conference TENCON, 2016.
5. Modeling and analysis of a hybrid active power filter for power quality improvement using hysteresis current control technique, IEEE Seventh India International Conference on Power Electronics (IICPE-2016) Thapar University, Patiala, Punjab, November 17-19, 2016.
6. Comparative analysis of a hybrid active power filter for power quality improvement using different compensation techniques, 2nd IEEE International Conference on Recent Advances and Innovations in Engineering (ICRAIE-2016) Jaipur, India, December 23-25, 2016.
7. Effect of pole placement of a full order state observer in sensorless speed estimation of brushed DC motor, IEEE 7th Power India International Conference (PIICON 2016) Govt. Engineering College Bikaner, Rajasthan, November 25-27, 2016.
8. J. Samantaray, P. P. Singh, and B K Roy, A Comparative Study of PI & PID Based SMC for Anti-synchronization of Vallis System, 5th International Conference on Computer Applications in Electrical Engineering - Recent Advances (CERA2017-), IIT Roorkee, (Accepted).
9. S. Ghosh, M. Ghosh, G.K. Panda, P.K. Saha, “Time Delay Compensation by Estimating Speed Error of a PMDC Motor Using Backward Arc Length Approach”, IEEE Sponsored 2016 International Conference on Intelligent Control, Power and Instrumentation (ICICPI 2016), Period- October 21st - 23rd, 2016, Place -Kolkata, India, 2016.
10. T.M. Rao, M. Ghosh, B. Halder, “Effect of Pole Placement of a Full Order State Observer in Sensorless Speed Estimation of Brushed DC Motor”, IEEE 7th PIICON 2016, Period- 25th-27th Nov, 2016, Place -Rajasthan, India, 2016.
11. K. S. Kumar, S. Affijulla, Voltage stability and dynamic analysis of North-Eastern Indian power Grid, 2016 Second IEEE International Innovative Applications of Computational Intelligence on Power, Energy and Controls with their Impact on Humanity (CIPECH), Period -Nov 18 - 19, Place -Ghaziabad, India, Page -114 - 118, 2016.
12. R. Roy, A. Dalal, K. K. Prabhakar and P. Kumar, “A general relation between supply harmonics and reactive power of an induction motor,” IECON 2016 – 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, 2016, pp. 1572-1577.
13. A. Dalal, P. Kumar and R. Roy, “Analytical model for permanent magnet motor with non-linear ferromagnetic material property,” IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, 2016, pp. 1604- 1609.
14. Sanjoy Debbarma, L.C Saikia, Nidul Sinha and B. Kar, “Fractional order two degree of freedom control for AGC of an interconnected multi-source power system”, 17th IEEE Conference on Industrial Technology, (ICIT 2016), Taipei.

Electronics & Communication Engineering


1. T. V. Mahendra, S. Mishra, and A. Dandapat, “Fully Dynamic High Density Associative Storage Architectures: Study, Comparison and a Proposal,” Electronics and Communication Systems (ICECS), 2016 3rd International Conference on, Coimbatore, India, pp. 3401-3404, 2016.
2. J. Saikia, S. Mishra, and A. Dandapat, “Large Scale Dynamic Content Addressable Memory with Hybrid Matchline Structure,” Students’ Technology Symposium (TechSym), 2016 IEEE, Kharagpur, India, 2016.
3. K. B. Singh, S. W. Hussain, T. V. Mahendra and Ch. V. RamaRao, “Implementation of OFDM and Pulsed-OFDM”, IEEE 15thInternational Conference on Information Technology (ICIT), Bhubaneswar, pp. 22-24, December2016.
4. A. Gogoi and V. Kumar, “Design of Low Power, Area Efficient and High Speed Approximate Adders for Inexact Computing,” IEEE International Conference on Signal Processing and Communication (ICSC 2016), 26th-28th December, Noida, Uttar Pradesh, 2016.
5. P. Rangababu, K. K. Anumandla and S. L. Sabat, “Performance Evaluation of Floating Point Differential Evolution Hardware Accelerator on FPGA,” In Proceedings of IEEE International Conference on TENCON, Nov 22-25, Singapore, 2016.
6. S. Jena, G. Panda, and P. Rangababu, “Investigation on FPGA based Passive AntiIslanding Protection Schemes for Grid Interfaced Distributed Generation System,” In Proceedings of IEEE International Conference on TENCON, Nov 22-25, Singapore, 2016.
7. V. M. Tripathi, S. Mishra, J. Saikia, and A. Dandapat, “A Low-Voltage 13T Latch-Type Sense Amplifier with Regenerative Feedback for Ultra Speed Memory Access,” 2017 30th International Conference on VLSI Design and 2017 16th International Conference on Embedded Systems (VLSID), Hyderabad, India, pp. 341-346, 2017.
8. V. A. Kumar, Ch. V. Rama Rao, A. Dutta, “Blind speech separation using canonical correlation and performance analysis,” IEEE International Conference CSCITA-2017, Mumbai, April 2017.
9. K. B. Singh, T. V. Mahendra, R. S. Kurmvanshi and Ch. V. RamaRao, “Image Enhancement with the Application of Local and Global Enhancement Methods for Dark Images”, IEEE International Conference on Innovations in Electronics, Signal Processing and Communication(IESC2017),6-7April, Shillong, 2017.
10. K. Shukla, Swamy Baldev and Rangababu P, “Area Efficient Dataflow Hardware Design of SAO Filter for HEVC,”In proceedings of International Conference on Innovations in Electronics, Signal Processing and Communication, 6-7 April, Shillong, 2017.
11. R. Khongsit and P. Rangababu, “Scalable Discrete Tchebichef Transform for Image/Video Compression,”In proceedings of International Conference on Innovations in Electronics, Signal Processing and Communication(IESC), 6-7 April, Shillong, 2017.
12. S. Burman, P. Rangababu and K. Datta, “Development of Dynamic Reconfiguration Implementation of AES on FPGA Platform,”In proceedings of International Conference on Devices for Integrated Circuit (DevIC, 23rd-24th March, Kolkata, 2017.
13. P. Ghosh, and P. Rangababu, “Design and Implementation of Ternary Content Addressable Memory (TCAM) based Hierarchical Motion Estimation for Video Processing,”VDAT 2017, June 29 to July 2nd, IIT Roorkee, 2017.
14. R. Choudary, and P. Rangababu, “Design and Implementation of Mixed Parallel and Dataflow Architecture for Intra-prediction Hardware in HEVC Decoder,”VDAT 2017, June 29 to July 2nd, IIT Roorkee, 2017.

Mechanical Engineering


1. J. P. Panda, H. V. Warrior and S. Maity, Pressure Strain Correlation for Decaying Homogeneous Turbulence, 6th International Conference on FMFP, Period -15-17 Dec, Place -MNNIT Allahabad, Page -53, 2016.
2. B. K. Sarkar R Saha S. Mookherjee D. Sanyal, Speed Control of Hydraulically and Electrically Coupled Multiple Francis Turbines, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Period -15th-17th December, 2016, Place -MANITA, Allahabad, 2016
3. U. Kashyap, K. Das and B.K. Debnath, Effect of surface texture of vortex generator in heat transfer enhancement, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power (FMFP), Period -December 15-17, 2016, Place -MNNITA, Allahabad, U.P., India, 2016.
4. A.K.S. Kushwaha, R.S. Das, A simplified ANN model to assess the performance of a liquid desiccant air-conditioning system, International Conference on Renewable and Sustainable Energy, Period -12-13 April, Place -Coimbatore, 2017.
5. M. Roy Choudhury, K. Debnath, and V. Upadhyay, Drilling of Unfilled Hemp/Epoxy and Fly Ash Filled Hemp/Epoxy Composites: Analysis of Force and Temperature, Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXV), Period -22-25th January, Place -The University of Auckland, Auckland, New Zealand, Page -750-765, 2017.
6. I. Singh, U.K. Komal, P.K. Rakesh and K. Debnath, Is Hole Making in Fiber Reinforced Polymers (FRPs) a Challenging Task?, Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXV), Period -22- 25th January, Place -The University of Auckland, Auckland, New Zealand, Page -572-579, 2017.
7. K. Debnath, M. Roy Choudhury, S. Chaitanya, I. Singh, and T.S. Srivatsan, Drilling Investigation of Injection Molded Short Sisal Fiber Reinforced Polypropylene Composites, Twenty-Fifth International Conference on Processing and Fabrication of Advanced Materials (PFAM-XXV), Period -22-25th January, Place -The University of Auckland, Auckland, New Zealand, Page -738-749, 2017.
8. M. Roy Choudhury, J. Ghosh, V. Upadhyay, and K. Debnath, Influence of Tool Geometry and Cutting Parameters on the Quality of Hole during Drilling of Hemp Fibre Reinforced Composites, The 4th International Conference on Advances in Materials and Materials Processing (iCAMMP-iv), Period -5-7th November, Place -Indian Institute of Technology Kharagpur, West Bengal, India, 2016.
9. Alom N., Kolaprathi S.C., Gadde S.C., and Saha U.K., 2016, “Aerodynamic design optimization of elliptical-bladed Savoniusstyle wind turbine by numerical simulations”, Paper No. OMAE2016-55095, ASME 35th International Conference on Ocean, Offshore and Arctic Engineering, June 19-24, Busan, South Korea.
10. N. Alom, U.K.Saha, 2017. “Arriving at the optimum overlap ratio for an elliptical-bladed Savonius rotor,” Paper No. GT2017- 64137, ASME Turbo Expo Turbine Technical Conference and Exposition, June 26–30, Charlotte, North Carolina, USA.
11. N. Alom, U.K.Saha,2016, “Numerical Optimization of Semicircular-bladed Savonius Rotor using Vent Augmenters”, 5th International Conference on Asian Congress of Gas Turbine, November 14-16, IIT Bombay, Mumbai, India.
12. P. R. Babu, V. Kulkarni and S. K. Dwivedy, Calibration of Single Component Accelerometer Force Balance and Vibrometer Balance using Short Duration Step Load, 5th National Conference on Wind Tunnel Testing, Period -16-17 March, Place – Dept of Aerospace Engineering, MIT Campus, Chennai, Page -53, 2016.

Civil Engineering


1. H. M. Kalita, A. K. Sarma, An implicit scheme for shallow water flow with wet dry interface, Water Resources, Vol.-45, Issue No.-1, Page Nos -61–68, 2018.
2. H. M. Kalita, A simple and efficient numerical model for simulating one dimensional dam break flows, Int. J. Hydrology Science and Technology (In press)
3. Chakraborty R., Dey A. (2018) Effect of Toe Cutting on Hillslope Stability. In: I.V. A., Maji V. (eds) Geotechnical Applications. Lecture Notes in Civil Engineering, vol 13. Springer, Singapore.
4. K. Khate, M. L. Patton, C. Marthong, Structural behaviour of stainless steel stub column under axial compression: a FE study, International Journal of Steel Structures, Springer, Vol.-18, Page Nos -1-18, 2018.
5. K. Khate, M. L. Patton, C. Marthong, Numerical Modelling of lean duplex stainless steel stub column built-up sections under pure axial compression, Journal of Advanced Research in Dynamical and control systems, Vol.-10, Page Nos -948-959, 2018.
6. Sahoo, S., Manna, B. and Sharma, K. G. (2018). “Seismic response of a steep nailed soil slope: Shaking table test and numerical studies.” International Symposium on Geotechnics of Transportation Infrastructure (ISGTI 2018), IIT Delhi, India, April 07-08.
7. P. Pathak and S. Sharma, Sorption isotherms, kinetics and thermodynamics of the contaminants onto Indian soils, Journal of Environmental Engineering, Journal of Environmental Engineering, ASCE, Vol. 144, Issue 10, 2018.
8. N. Koshy, S.S U, S.Sharma, J. Joseph,V.Sharma and D.N. Singh, B. Jha, Characterization of the Soil Samples from the Lonar Crater, India, Geotechnical Engineering Journal of the SEAGS & AGSSEA, Vol.49, Issue 1, 2018.
9. C. Marthong, A.S. Sangma, S.A. Choudhury, R.N. Pyrbot, S.L. Tron, L. Mawroh, G.S. Bharti (2017). “Structural Behavior of Recycled Aggregate Concrete Beam-Column Connection in Presence of Micro Concrete at Joint Region”, 11, 243-251.
10. Comingstarful Marthong (2018). “Behaviour of recycled aggregate concrete beam-column connections in presence of PET fibers at the joint region,” Computers and Concrete, Techno Press, 21 (6), pp. 669-679.
11. Sahoo, S., Manna, B. and Sharma, K. G. (2017). “Seismic stability of a steep nailed soil slope- Shaking table testing and numerical analysis.” 19th International Conference on Soil Mechanics and Geotechnical Engineering (19th ICSMGE), Seoul, Republic of Korea, September 17-22, pp. 2195-2198.
12. C. Marthong, A. S. Sangma, Md. S. A.Choudhury, R. N. Pyrbot, S. L. Tron ,L. Mawroh, G. S. Bharti, Structural Behavior of Recycled Aggregate Concrete Beam-Column Connection in Presence of Micro Concrete at Joint Region, Structures, Elsevier, Vol.-11, Page Nos -243–251, 2017.
13. M. L. Patton, K. D. Singh, Buckling of fixed-ended concrete-filled steel columns under axial compression, International Journal of Steel Structures, Springer, Vol.-17(3), 1-13, 2017.
14. D. Podder, A. Gadagi, N. R. Mandal, S. Kumar, L. Singh, and S. Das, Numerical investigation on the effect of thermomechanical tensioning on the residual stresses in thin stiffened panels, Journal of Ship Production and Design, Vol.-33, Issue No.-1, Page Nos -1-11, 2017.
15. A. Gadagi, N. R. Mandal, D. Podder, S. Kumar, Experimental and numerical investigation on the effect of Thermo-Mechanical Tensioning on weld induced out-of-plane distortion, Journal of Ship Production and Design, Issue No.-Accepted, 2017.
16. Dibyendu Adak, Manas Sarkar, Saroj Mandal. Structural behavior of nano-silica modified fly ash based geopolymer concrete, Construction and Building Materials, 135, 2017, 430–439.
17. SJ Chithambaram, S Kumar, MM Prasad, D Adak, Effect of parameters on the compressive strength of fly ash based geopolymer concrete. Structural concrete, https://doi.org/10.1002/suco.201700235. 8. M Maiti, M Sarkar, S Xu, S Das, D Adak, S Maiti, Application of silica nanoparticles to develop faujasite nano-composite for heavy metal and carcinogenic dye degradation. Environmental Progress & Sustainable Energy, https://doi.org/10.1002/ ep.12904

Computer Science And Engineering


1. Sinha Roy, Diptendu, Behera, Ranjit K, Reddy, K. Hemant Kumar, Buyya, Rajkumar, (2018) “A Context-Aware, Fog Enabled Scheme for Real-Time, Cross-Vertical IoT Applications”, IEEE Internet of Things Journal (Accepted).
2. Reddy, K. Hemant Kumar, Hussain, Mir Wajahat, Paik, Subhendu Sekhar, Sinha Roy, Diptendu, (2018) “A Counter Based Approach to Intelligent Data Placement in Hadoop Clusters”, Cluster Computing (Springer), (Accepted)
3. Reddy, K. H. K, Pandey, Vishal, Roy, D. S, (2018), A Novel Entropy Based Dynamic Data Placement Strategy for Data Intensive Applications in Hadoop Clusters, International Journal of Big Data Intelligence, Inderscience Publication
4. Rao, Nalluri MadhuSudana, Krithivasan Kannan, Xiao-zhi Gao, and Diptendu Sinha Roy. “Novel classifiers for intelligent disease diagnosis with multi-objective parameter evolution.” Computers & Electrical Engineering 67 (2018): 483-496.
5. Behera, Ranjit Kumar, K. Hemant Kumar Reddy, and Diptendu Sinha Roy. “Modeling and assessing reliability of serviceoriented internet of things.” International Journal of Computers and Applications (2018): 1-12.
6. Reddy, K. Hemant Kumar, Geetika Mudali, and Diptendu Sinha Roy. “A novel coordinated resource provisioning approach for cooperative cloud market.” Journal of Cloud Computing 6, no. 1 (2017): 8.
7. Nalluri, M. R., & Roy, D. S. (2017). Hybrid Disease Diagnosis Using Multiobjective Optimization with Evolutionary Parameter Optimization. Journal of healthcare engineering, 2017.
8. P.L. Thangkhiew, K. Datta, “Scalable In-Memory Mapping of Boolean Functions in Memristive Crossbar Array Using Simulated Annealing”, Journal of Systems Architecture, DOI: 10.1016/j.sysarc.2018.07.002, 2018 (Accepted).
9. L. Marbaniang, K. Datta, “Efficient Design of Quantum Circuits using Nearest Neighbor Constraint in 3D Architecture”, Journal of Circuits, Systems and Computers, Vol. 28, No. 5, pp. 1950084:1-1950084:19, 2019, DOI: 10.1142/S0218126619500841, 2018 (Accepted).
10. P.L. Thangkhiew, R. Gharpinde, K. Datta, “Efficient Mapping of Boolean Functions to Memristor Crossbar using MAGIC NOR Gates”, IEEE Transactions on Circuits and Systems-I: Regular Papers, Vol. 65, No. 8, pp. 2466-2476, August 2018.
11. R. Gharpinde, P.L. Thangkhiew, K. Datta, I. Sengupta, “A Scalable In-Memory Logic Synthesis Approach using Memristor Crossbar”, IEEE Transactions on Very Large Scale Integration Systems, Vol. 26, No. 2, pp. 355-366, February 2018.
12. Kole, K. Datta, I. Sengupta, “A New Heuristic for N-Dimensional Nearest Neighbor Realization of a Quantum Circuit”, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 37, No. 1, pp. 182-192, January 2018.
13. “Parallel Reachability Analysis of Hybrid Systems in XSpeed”, A. Gurung, R. Ray, E. Bartocci, S. Bogomolov and R. Grosu, To appear in the International Journal on Software Tools for Technology Transfer (STTT). Springer [SCI].
14. Shubham Singh, Akhilendra Pratap,” Ensuring Data Security in Cloud Storage”, International Journal of Machine Learning and Computing, April 2018. (Accepted).
15. Surmila Thokchom and Dilip Kr. Saikia, “Privacy Preserving and Public Auditable Integrity Checking on Dynamic Cloud Data”, International journal of Network Security (Accepted).
16. Deepak Kumar, Prabir Saha and Anup Dandapat, “Vedic algorithm for cubic computation and VLSI implementation”, Elsevier Engineering Science and Technology, an International Journal, Vol./Issue : 20/5, pp. 1494-1499, 2017.
17. D. Kumar, P. Saha and A. Dandapat, “Hardware Implementation of Methodologies of Fixed Point Division Algorithms”, International Journal on Smart Sensing and Intelligent Systems, Vol.10, No.3, pp.630-645, 2017.
18. P. Saha, and D. Kumar, “A new algorithm for the computation of the decimals of inverse”, Scientia Iranica journal, Vol.24, No.3, pp.1363-1372, 2017.

Electrical Engineering


1. Smitha Joyce Pinto, Gayadhar Panda and Rangababu Peesapati, “An Implementation of Hybrid Control Strategy for Distributed Generation System Interface Using Xilinx System Generator”, IEEE Transactions on industrial informatics, 2017, vol. 13, no. 5, pp. 2735-2745.
2. Bonu Ramesh Naidu, Gayadhar Panda and Pierluigi Siano “A Self-Reliant DC Microgrid: Sizing, Control, Adaptive Dynamic Power Management, and Experimental Analysis”, IEEE Transactions on industrial informatics, 2018, vol. 14, no. 8, pp. 3300- 3313.
3. Moushumi Patowary, Gayadhar Panda, Bonu Ramesh Naidu and Bimal C. Deka “ANN-based adaptive current controller for on-grid DG system to meet frequency deviation and transient load challenges with hardware implementation” IET Renewable Power Generation, 2018, vol. 12, no. 1, pp. 61-71.
4. Moushumi Patowary, Gayadhar Panda, and Bimal C. Deka “An adaptive current control-detuned harmonics elimination schemes for enhancement of power quality in RES interfaced AC-grid network” Elsevier, Sustainable Energy Technologies and Assessments, 2018, vol. 25, pp.11-23.
5. Satabdy Jena, Gayadhar Panda, and P. Rangababu, “FPGA based implementation for Improved control scheme of gridconnected PV system with three-phase three-level NPC-VSI” International Journal of Circuit Theory and Applications, Wiley,feb 2018, DOI: https://doi.org/10.1002/cta.2448.
6. Priyabat Garanayak and Gayadhar Panda, “An adaptive linear neural network with least mean M-estimate weight updating rule employed for harmonics identification and power quality monitoring”, Transactions of the Institute of Measurement and Control, SAGE journal, 2017, pp. 1–14.
7. P.S.puhan, P.K.Ray & G.Panda “A Comparative Analysis of Artificial Neural Network and Synchronous detection Controller to improve power quality in Single Phase System” International Journal of Power Electronics, Inderscience” Accepted, 2017.
8. Agamani Chakraborty, Debabrata Roy, Pradip Kr Sadhu, Ankur Ganguly, Atanu Banerjee “An Interference of High Frequency Series Resonant Inverter in Domestic Induction Heater Estimation in Emission Control Using FEM ”- Journal of Power Technologies, Vol.97, No.4, December, 2017,pp.283-288.
9. Sanjoy Debbarma, Rituraj Shrivastwa, Grid Frequency Support from V2G Aggregators and HVDC Links in Presence of Nonsynchronous Units, IEEE Systems Journal, Vol.-NA, pp. 1-10, 2018. (Accepted for Publication).
10. Arunima Dutta, Sanjoy Debbarma, “Frequency Regulation in Deregulated Market Using Vehicle-to-Grid Services in Residential Distribution Network”, IEEE Systems Journal, Vol.- NA, pp. 1-9, 2017 (Accepted for Publication)
11. P. P Singh, J. P. Singh, and B. K. Roy, “NAC-based Synchronisation and Anti-synchronisation Between Hyperchaotic and Chaotic Systems, Its Analogue Circuit Design and Application,” IETE Journal of Research, vol. 63, no. 6, pp. 1-17, 2017.
12. V. Kumar, E. Tiwari, V. K. Chauhan, and P. P. Singh, Hybrid Synchronisation of Vallis Chaotic Systems Using Nonlinear Active Control, International Journal of Engineering and Technology, vol. 7, no. 2.21, pp. 50-52, 2018.
13. Anand Kumar and P. P. Singh, Synchronisation of Unified Chaotic Systems using Nonlinear Active Control Technique and Its Comparative Performance Analysis, Jour of Adv Research in Dynamical & Control Systems, vol. 10, no. 3, pp. 139-144, 2018.
14. P. P. Singh and B. K. Roy, Comparative performances of synchronisation between different classes of chaotic systems using three control techniques, Annual Reviews in Control, vol. 45, pp. 152-165, 2018.
15. R. Roy, K. K. Prabhakar and P. Kumar, “Core-loss calculation in different parts of induction motor,” in IET Electric Power Applications, vol. 11, no. 9, pp. 1664-1674, 11 2017.
16. Shaik Affijulla and Praveen Tripathy, “Development of Dictionary based Phasor Estimator Suitable for P-class Phasor Measurement Unit”, IEEE Transactions on Instrumentation and Measurement, vol. In Press, pp. 1-13, 2018. (10.1109/ TIM.2018.2824545)
17. Shaik Affijulla and Praveen Tripathy, “A Robust Fault Detection and Discrimination Technique for Lines”, IEEE Transactions on Smart Grid, vol. In Press, pp. 1-11, 2017. (10.1109/TSG.2017.2709546)
18. M. Ghosh, G.K. Panda, P.K. Saha, Analysis of Chaos and Bifurcation Due to Slotting-Effect and Commutation in a Current Discontinuous Permanent Magnet Brushed DC Motor Drive, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, Vol.-65, Issue No.-3, 2018. http://dx.doi.org/10.1109/TIE.2017.2745446
19. M. Ghosh, P.K. Saha, G.K. Panda, Hybrid Computational Mechanical Sensorless Fuzzified Technique for Speed Estimation of Permanent Magnet Direct Current Brushed Motor, IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, Vol.-65, Issue No.- 6, 2018. http://dx.doi.org/10.1109/ TIE.2017. 2767553
20. S. Ghosh, M. Ghosh, G.K. Panda, P.K. Saha, Mechanical Contact-Less Computational Speed Sensing Approach of PWM Operated PMDC Brushed Motor: A Slotting-Effect and Commutation Phenomenon Incorporated Semi-Analytical Dynamic Model Based Approach, IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS--II: EXPRESS BRIEFS, Vol.-65, Issue No.-1, 2018. http://dx.doi.org/10.1109/TCSII.2017.2699080
21. M. Ghosh, S. Ghosh, P.K. Saha, G.K. Panda, Sensorless Speed Estimation of Permanent Magnet DC Brushed Motor Considering the Effect of Armature Teeth-Slots and Commutation, IET POWER ELECTRONICS, Vol.-10, Issue No.-12, 2017. http://dx.doi. org/10.1049/iet-pel.2016.0634
22. Ksh. Milan Singh, “Simultaneous Estimation of Moving-Vibration Parameters by Sliding Goertzel Algorithm in PLL Technique,” IEEE Trans. Instrumentation & Measurement., 2018. (Early Access).

Electronics & Communication Engineering


1. S. Mishra and A. Dandapat, Energy-efficient adaptive match-line controller for large-scale associative storage, IEEE Transactions on Circuits and Systems II: Express Briefs, Vol.-64, Issue No.-6, PageNos -710-714, 2017.
2. T. V. Mahendra, S. Mishra, and A. Dandapat, Self-controlled high performance pre-charge free content addressable memory, IEEE Transactions on Very Large Scale Integration (VLSI) Systems, Vol.-PP, Issue No.-99, PageNos -1-5, 2017.
3. S. Mishra, T. V. Mahendra, J. Saikia, and A. Dandapat, A Low-Overhead Dynamic TCAM with Pipelined Read-Restore Refresh Scheme, IEEE Transactions on Circuits and Systems I: Regular Papers, Vol.-PP, Issue No.-99, Page Nos -1-22, 2017.
4. D. Kumar, P. Saha and A. Dandapat, Vedic Algorithm for Cubic Computation and VLSI Implementation, Engineering Science and Technology, an International Journal, Elsevier, Vol.-XX, Issue No.-XX, Page Nos –XX, 2017.
5. V. Anil Kumar, Ch. V. Rama Rao, and Anirban Dutta, Performance analysis of blind source separation using canonical correlation, Springer, Circuits, Systems, and Signal Processing, Vol.37, Issue No.2, Page Nos -658-673, 2018.
6. A. Sarkhel; S. R. B. Chaudhuri, Compact Quad-Band Polarization-Insensitive Ultrathin Metamaterial Absorber With Wide Angle Stability, IEEE Antenna & Wireless Propagation Letters, Vol.-16, Page Nos -3240 – 3244, 2017.
7. Satabdy Jena, Gayadhar Panda, Rangababu Peesapati, FPGA based implementation for Improved control scheme of gridconnected PV system with three-phase three-level NPC-VSI, International Journal of Circuit Theory Applications (IJCTA), Willey Blackwell, Vol.-Early Access, Page Nos -1-26, 2018.
8. Sasidhar M, Pradeep Rathore, Rangababu Peesapati, Decimal Multiplication using Compressor based-BCD to Binary Converte, International Journal of Engineering Science and Technology (Elsevier), Vol.-Early Access, Page Nos -1-6, 2018.
9. Swamy Baldev, Shukla Kaustub, Sushanta Gogai, Pradeep Rathore, Rangababu Peesapati, Design and Implementation of Efficient Streaming Deblocking and SAO Filter for HEVC Decoder, IEEE Transactions on Consumer Electronics, Vol.-64, Issue No.-1, Page Nos -127-135, 2018
10. Smitha Joyce Pinto, Gayadhar Panda, Rangababu Peesapati, An Implementation of Hybrid Control Strategy for Distributed Generation System Interface Using Xilinx System Generator, IEEE Transactions on Industrial Informatics, Vol.-13, Issue No.-5, Page Nos -2735-2745, 2017.
11. Kirankumar Anumandla, Rangababu Peesapati, Samrat L Saba, Hardware Implementation of Multi-Objective Differential Evolution algorithm: A Case Study of Spectrum Allocation in Cognitive Radio Networks, International Journal of Innovative Computing and Applications (Inderscience), Vol.-8, Issue No.-4, Page Nos -241-253, 2017.
12. Rangababu Peesapati, Sonketa Das, Swamy Baldev, Shaik Rafi Ahamed, Design of Streaming Deblocking Filter for HEVC Decoder, IEEE Transactions on Consumer Electronics, Vol.-63, Issue No.-3, Page Nos -1-9, 2017.
13. S. Majumdar, S. Majumder, A. Kakati, Effect of Aluminum Wet Etching on GaAs and Poly-DiMethyl Siloxane Substrate: Surface Morphology and Topography Analysis, Materials Focus, Vol.-7, Issue No.-1, Page Nos -45-49, 2018.
14. V. Kumar, K. L. Baishnab and B. Kumar, A Novel Shared Active Pixel Architecture (SAPA) with Low Dark Current and High FillFactor (FF) for CMOS Image Sensors, Journal of Low Power Electronics, Vol.-13, Issue No.-3, Page Nos -490-496, 2017.
15. S. D. Thabaha, M. Sonowal, P. Saha On the Design of Efficient Residue-to-Binary Converters Procedia Computer Science, Volume 132, Pages 816-82, 2018.
16. B.Pushpa Devi, Kh. Maglem Singh, Sudipta Roy, New Copyright Protection Scheme for Digital Images Based on Visual Cryptography, IETE Journal of Research, Vol 63, Issue 6, Page No. 870-880, 2017.

Mechanical Engineering


1. Pradip K. Sahu, B. M. Gunji, G. B. Mahanta and B. B. Biswal. “A Heuristic Comparison of Optimization Algorithms for the Trajectory Planning of a 4-axis SCARA Robot Manipulator”, Special Issue on Computational Intelligence for Data Analytics 2018, Springer International Journal of Data Science and Analytics.
2. Amruta Rout, B. B. Deepak, B. B. Biswal, G. B. Mahanta, and B. M. Gunji, “An Optimal Image Processing Method for Simultaneous Detection of Weld Seam Position and Weld Gap in Robotic Arc Welding.” International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME) 8, no. 1 (2018): 37-53.
3. B. M. Gunji, B.B. Deepak, MR. Bahubalendruni and B.B. Biswal, “An Optimal Robotic Assembly Sequence Planning by Assembly Subsets Detection Method Using Teaching Learning Based Optimization Algorithm”. IEEE Transactions on Automation Science and Engineering.
4. Rahul, Saurav Datta, Manoj Masanta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Analysis on Surface Characteristics of Electro-Discharge Machined Inconel 718, Int. J. Materials and Product Technology, Vol. 56, Nos. 1/2, pp.135-168 2018
5. B. Panda, M. Leite, B. B. Biswal, X. Niu, and A. Garg, (2018), “Experimental and numerical modelling of mechanical properties of 3D printed honeycomb structures. Measurement, 116, 495-506.SCI Index
6. B. B. Deepak, B.M.Gunji, MR. Bahubalendruni and B. B. Biswal, (2018), “Assembly sequence planning using soft computing methods: A review”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering : 0954408918764459.
7. B. M. Gunji, B. B. Deepak and B.B. Biswal, (2017), A Novel Design for Assembly Approach for Modified Topology of Industrial Products. International Journal of Performability Engineering. 2017 Nov;13(7):1013.
8. Rahul, Saurav Datta, Bibhuti Bhusan Biswal, SibaSankarMahapatra, Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: Emphasis on surface integrity and metallurgical characteristics, Journal of Manufacturing Processes, Vol. 26, pp. 188-202, 04, 2017
9. Rahul, Saurav Datta, Manoj Masanta, Bibhuti Bhusan Biswal, SibaSankarMahapatra, A Novel Satisfaction Function and Distance-Based Approach for Machining Performance Optimization during Electro-Discharge Machining on Super Alloy Inconel 718, Arabian Journal for Science and Engineering, Vol.42. No 5, pp.1999-2020, 02, 2017.
10. Rahul, Kumar Abhishek, Saurav Datta, Bibhuti Bhusan Biswal, SibaSankarMahapatra, Machining Performance Optimization during EDM of Inconel 718: A Case Experimental Investigation, International Journal of Productivity and Quality Management, Vol. 21, No. 4, pp. 460-489, 06, 2017
11. B. M. Gunji, B. B. Deepak, M R. Bahubalendruni and B. B. Biswal, (2017). Hybridized genetic-immune based strategy to obtain optimal feasible assembly sequences. International Journal of Industrial Engineering Computations. 2017; 8(3):333- 46.
12. B. N. Panda, MR. Bahubalendruni, B. B. Biswal and M. Leite, (2017), “A CAD-based approach for measuring volumetric error in layered manufacturing.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231.13 (2017): 2398-2406.
13. MR. Bahubalendruni and B. B. Biswal, (2017), A novel concatenation method for generating optimal robotic assembly sequences. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, no. 10 (2017): 1966-1977.
14. Asita Kumar Rath, Dayal R. Parhi, Harish Chandra Das, Manoj Kumar Muni, Priyadarshi Biplab Kumar , Analysis and use of fuzzy intelligent technique for navigation of humanoid robot in obstacle prone zone, Defence Technology, 1-6, 2018
15. Asita Kumar Rath, Harish Chandra Das, DayalR.Parhi, Priyadarshi Biplab Kumar , Application of artificial neural network for control and navigation of humanoid robot, Journal of Mechanical Engineering and Sciences, 12, 3529-3538, 2018
16. Asita Kumar Rath, Dayal R.Parhi, Harish Chandra Das, Priyadarshi Biplab Kumar , Behaviour based navigational control of humanoid robot using genetic algorithm technique in cluttered environment, Modelling, Measurement and Control B, 91, 32- 36, 2018
17. Numerical, Experimental and Fuzzy Logic Applications for Investigation of Crack Location and Crack Depth Estimation in a Free-Free Aluminum Beam, Sanjay K. Behera, DayalR.Parhi, Harish Chandra Das , Vibrations in Physical Systems, 29, 1-20, 2018
18. Sanjay K. Behera, DayalR.Parhi, Harish Chandra Das , Approach to establish a Hybrid Intelligent Model for Crack Diagnosis in a Fix-Hinge Beam Structure , International Journal of Structural Integrity, accepted, 2018
19. Binayak Pattanayak, Siba Shankar Mohapatra, Harish Chandra Das, Mathematical Modelling for Low Temperature Batch Drying of Paddy using Fluidized Bed Technology, International Journal of Mathematical Modelling and Numerical Optimisation, 2018
20. Shakti P. Jena, Saroj K. Acharya, Harish C. Das, Pragyan P. Patnaik , Investigation of the effect of FeCl3 on combustion and emission of diesel engine with thermal barriercoating., Sustainable Environment Research, 28, 72-76, 2018
21. Pruthiviraj Nemalipuri, Dr. Malay Kumar Pradhan, Dr. Harish Chandra Das, Dr. Rabindra Narayan Mahapatra, Barsha Das , Prediction of Air pollutants Emitting from Chimney of a CHP using CFD, 9, 105-110, 2018
22. Pragyan P Patnaik, Shakti P Jena, Saroj K Acharya, Harish C Das, Effect of FeCl3 and diethyl ether as additives on compression ignition engine emissions, Sustainable Environment Research , 27, 154-161,2017
23. Saroj Kumar Padhi,Ranjeet Kumar Sahu, S. S. Mahapatra, Harish Chandra Das, Anoop Kumar Sood, Brundaban Patro,A. K. Mondal , Optimization of fused deposition modelling process parameters using a fuzzy inference system coupled with Taguchi philosophy, International Journal of Advance Manufacturing, 5, 231-242, 2017
24. Saroj Kumar Padhi, S.S. Mahappatra and Harish Chandra Das , Performance of a Copper electroplated plastic electrical discharge machining electrode compared to a Copper electrode, International Journal of Pure and applied Mathematics, 114, 459-469, 2017.
25. Sanjay K. Behera1, Dayal R. Parhi, Harish C. Das , A hybrid intelligent model for crack diagnosis in a free-free aluminium beam structure, Modelling, Measurement and Control B, 87, 2, 2018.
26. Application of genetic algorithm for crack diagnosis of a free-free aluminum beam with transverse crack subjected to axial and bending load, Sanjay K. Behera1, Dayal R. Parhi, Harish C. Das, , 2018
27. B. K. Sarkar, Modeling and Validation of a 2-DOF Parallel Manipulator for Pose Control Application Reference, Robotics and Computer Integrated Manufacturing, Vol.-50, Page No:-234-241, 2018.
28. M. A. Singh, K. Das, D. K. Sarma, Thermal simulation of machining of alumina with wire electrical discharge machining process using assisting electrode, Journal of Mechanical Science and Technology, 32, 1, Page No:333-343, 2018.
29. M.A. Singh, D.K. Sarma, Parametric and Subsurface Analysis of MWCNT Alumina Composites in WEDM Process, Ceramics International, Elsevier, Vol.-44, Page No:2186-2197, 2018.
30. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedláek, P. Šajgalík, Machinability analysis of multi walled carbon nanotubes filled alumina composites in Wire Electrical Discharge Machining process, Journal of the European Ceramic Society, Elsevier, Vol.- 37, Page No:3107-3114, 2017.
31. U. Kashyap, K. Das, B. K. Debnath, Effect of surface modification of a rectangular vortex generator on heat transfer rate from a surface to fluid, International Journal of Thermal Sciences, 127, Page No:61-78, 2018.
32. P. Ramesh, S. R. Nanda, V. Kulkarni and S. K. Dwivedy, Soft Computing Based Force Recovery Technique for Hypersonic Shock Tunnel Tests, International Journal of Structural Stability and Dynamics, 18(05), 1871004, 2018.
33. P. Ramesh, S. R. Nanda, V. Kulkarni and S. K. Dwivedy, Application of neural-networks and neuro-fuzzy systems for the prediction of short-duration forces acting on the blunt bodies, Soft Computing, Pg:1-14, 2018.
34. N. Alom and U.K. Saha, Four decades of research into the augmentation techniques of Savonius wind turbine rotor, ASME Journal of Energy Resources Technology, Vol. 140, No. 5, pp: 050801-1-050801-14, 2018.
35. N. Alom and U.K. Saha, Performance evaluation of vent-augmented elliptical-bladed Savonius rotors by numerical simulation and wind tunnel experiments, Energy, Vol. 152, Page No: 277 -290, 2018.
36. A.C. Chandekar, B.K. Debnath, Computational investigation of air-biogas mixing device for different biogas substitutions and engine load variations, Renewable Energy, 127, 811-824, 2018.
37. H. C. Das, Investigation of the effect of FeCl3 on combustion and emission of diesel engine with thermal barrier coating,, Sustainable Environment Research, Vol.-28, Issue No.-2, Page No: -72-78, 2018.
38. H. C. Das, Effect of FeCl3 and diethyl ether as additives on compression ignition engine emissions, Sustainable Environment Research, Vol.-27, Issue No.-3, Page No: 154-161, 2017.
39. J. P. Panda, H. V. Warrior, S. Maity, A. Mitra, K. Sasmal, An improved model including length scale anisotropy for the pressure strain correlation of turbulence, Journal of Fluids Engineering, Vol.139, Issue No.4, Page No: 044503-1 to 6, 2017.
40. T. Bose, A. R. Mohanty, Large amplitude axisymmetric vibration of a circular plate having a circumferential crack, Journal of Mechanical Sciences, Vol.124, Page No: 194–202, 2017.

Chemical & Biological Sciences


1. S. Das, A. Karn, R. Sharma, M.A. Rohman, S. Koley, P. Ghosh, A. Singha Roy*, Characterization of non-covalent binding of 6-hydroxyflavone and 5,7-dihydroxyflavone with bovine hemoglobin: Multi-spectroscopic and molecular docking analyses, Journal of Photochemistry and Photobiology B: Biology, 2018, 178, 40-52.
2. S. Das, P. Ghosh, S. Koley, A. Singha Roy*, Binding of naringin and naringenin with hen egg white lysozyme: A spectroscopic investigation and molecular docking study, Spectrochimica Acta A: Molecular and Biomolecular Spectroscopy, 2018, 192, 211-221.
3. S. Das, M. A. Rohman, A. Singha Roy*, Exploring the non-covalent binding behaviours of 7-hydroxyflavone and 3-hydroxyflavone with hen egg white lysozyme: Multi-spectroscopic and molecular docking perspectives, Journal of Photochemistry & Photobiology B: Biology, 2018, 180, 25-38.
4. A. K. Paul, D. Donzis, W. L. Hase, Collisional Intermolecular Energy Transfer From a N2 Bath at Room Temperature to a Vibrationally “Cold” C6F6 Molecule Using Chemical Dynamics Simulations, Journal of Physical Chemistry A, 2017, 121, 4049- 4057.
5. H. N. Bhandari, X. Ma, A. K. Paul, P. Smith, W. L. Hase, PSO Method for Fitting an Analytic Potential Energy Function. Application to I-(H2O), Journal of Chemical Theory and Computation. 2018, 14, 1321-1332.
6. O. M. El-Kadri, A. A. Siddique, M. D. Eaton, N. K. Nath, Synthesis and characterization of two dioxidomolybdenum(VI) complexes bearing amidinato and pyrazolato ligands and their use in thin film growth and oxygen atom transfer reactions, Polyhedron, 2018, 147, 36-41.
7. K. Kumar Sarmah, P. Sarma, D. R. Rao, P. Gupta, N. K. Nath, M. Arhangelskis, R. Thakuria, Mechanochemical Synthesis of Olanzapine Salts and Their Hydration Stability Study Using Powder X-ray Diffraction, Crystal Growth and Design, 2018, 18, 2138-2150.
8. N. K. Nath, M. Hazarika, P. Gupta, N. R. Ray, A. K. Paul, E. Nauha, Plastically bendable crystals of probenecid and its cocrystal with 4,4′-Bipyridine, Journal of Molecular Structure, 2018, 1160, 20-25.

Humanities & Social Sciences


1. B. Samita Devi, P. S. Mangang, ‘Gender and Power Struggle in the Domestic Sphere: A Contemporary Crisis’, Contemporary Discourse: A Peer Reviewed International Journal, Vol.-9, Issue No.-1, 2018.
2. B. Samita Devi, P. S. Mangang, ‘August Strindberg on the ‘Woman Question’ and ‘Male Malady’’, International Journal of Research in Social Sciences and Humanities, Vol.-8, Issue No. 1, 2018.
3. R. Lyngwa, P. S. Mangang, ‘The Representation of Oppression in Vijay Tendulkar’s Sakharam Binder’, Contemporary Discourse: A Peer Reviewed International Journal, Vol.-9, Issue No.-1, 2018. NB. B. Samita Devi and R. Lyngwa are PhD Research Scholars of HS Department.

Mathematics


1. Saikat Mukherjee, Youngsaeng Lee, Jong-Min Kim, Jun Jang, and Jeong-Soo Park, “Construction of bivariate asymmetric copulas”Communications for Statistical Applications and Methods, Vol.-25, Issue No.-2, Page Nos - 217-234, 2018. https://doi.org/10.29220/CSAM.2018.25.2.217
2. G.S. Seth, R. Sharma, B. Kumbhakar and R. Tripathi, MHD Stagnation Point Flow over Exponentially Stretching Sheet with Exponentially Moving Free-Stream, Viscous Dissipation, Thermal Radiation and Non-Uniform Heat Source/Sink, Diffusion Foundations, Vol. 11, pp 182-190, 2017
3. S.O. Adesanya, H.A. Ogunseye and Srinivas Jangili, “Unsteady squeezing flow of a radiative Eyring-Powell fluid channel flow with chemical reactions”, International Journal of Thermal Sciences (Elsevier), Vol.-125, pp. 440-447, 2018. https://www.sciencedirect.com/science/article/pii/S1290072917315016
4. Srinivas Jangili, S. O. Adesanya, J. A. Falade and G. Nagaraju, “Entropy generation analysis for a radiative micropolar fluid flow through a vertical channel saturated with non-Darcian porous medium”, International Journal of Applied and Computational Mathematics (Springer), Vol.-3, Issue No.-2, Page Nos -1-24, 2017. https://link.springer.com/article/10.1007/s40819-017-0322-8
5. Srinivas Jangili and O.A. Beg, “Homotopy study of entropy generation in magnetized micropolar flow in a vertical parallel plate channel with buoyancy effect”, Heat Transfer Research (Begell House), Vol.-49, Issue No.-6, PageNos-529-553, 2018. http://www.dl.begellhouse.com/journals/46784ef93dddff27,359b3b593a78373c,287c5e1908580a3b.html
6. Q. Hong, N. Jana, S. Kumar & K. Chatterjee, Stress-strength models with more than two states under exponential distribution. Communication in Statistics-Theory and Methods. Vol. 46, No. 1, pp.120-132, 2017.

Physics


1. K. Senthilkumar, T. Yoshida, Y. Fujita, Formation of D–VZn complex defects and possible p-type conductivity of ZnO nanoparticle via hydrogen adsorption, Journal of Material Science, 53, 11977, (2018).
2. Arpita Nath, Pooja Sharma and Alika Khare ,Laser Provoked Metastable Phases in Liquids, Laser Physics Letters , 15 , 026001,(2018).
3. Arpita Nath, JA Dharmadhikari, AK Dharmadhikari, D Mathur, S Mazumdar, Ultrafast dynamics of hemin aggregates, Physical Chemistry Chemical Physics, 19, 26862, (2017).
4. Arpita Nath and Alika Khare , Functional Activity of TiO2 Nanocolloids Generated From Diverging High Power Laser Beams , Radiation Effects and Defects in Solids , 2018 (DOI: 10.1080/10420150.2018.1509860).
5. D. Kharkongor, W. L. Reenbohn, Mangal C. Mahato, Inertial frictional ratchets and their load bearing efficiencies, Journal of Statistical Mechanics 2018, 033209 (2018).
6. K Bhuyan, A Bhattacharjee, PR Alapati,Sensing of ammonia gas by undoped and aluminum-doped tin oxide nanoparticles by Raman spectroscopy, Pramana 91, 32, (2018).
7. D Bhattacharjee, R Mishra, R Dabrowski, A Bhattacharjee, Experimental and DFT generated Raman study of two bent-core monomeric liquid crystalline compounds, Liquid Crystals, 1, (2018).
8. R Mishra, A Bhattacharjee, D Bhattacharjee, KN Singh, PR Alapati, Temperature-dependent Raman study of pure and silver nanoparticles dispersed N-(4-n-heptyloxybenzylidene)-4’-n-butylaniline (7O. 4), Liquid Crystals, 1, (2018).
9. D Bhattacharjee, R Dabrowski, A Bhattacharjee, Theoretical investigation of nonlinear optical and vibrational properties of two liquid crystalline compounds, Journal of Molecular Liquids, 255, 80, (2018)
10. D Bhattacharjee, PR Alapati, A Bhattacharjee, Comparative experimental optical studies on 7. O5O. 7 dimeric liquid crystal compound using theoretical models, Liquid Crystals, 45, 586, (2018).
11. Ramanuj Mishra, Ayon Bhattacharjee, Debanjan Bhattacharjee, Keisham Nanao Singh, Binod Gogoi, Parameswara Rao Alapati,Temperature-dependent vibrational spectroscopic studies of pure and gold nanoparticles dispersed 4-n-Hexyloxy-4’- cyanobiphenyls, Liquid Crystals, 1, 1,(2018).
12. SP Choudhury, N Kumari, A Bhattacharjee, Study of structural, electrical and optical properties of Ni-doped SnO2 for device application: experimental and theoretical approach Journal of Materials Science: Materials in Electronics, 28 , 18003,(2017).
13. M Lyndem, R Dabrowski, A Bhattacharjee, Study of the effect of temperature on the optical properties of a laterally Fluorinated LC compound, Molecular Crystals and Liquid Crystals 658, 81, (2017)
14. Sandip Paul Choudhury, D Bhattacharjee, A Bhattacharjee, Humidity-Dependent Impedance and DFT Analysis of Pure and Cu-Doped SnO2 Thin Films, Surface Review and Letters,25, 1850106, (2017)
15. Vivek Kumar, Deepak Gupta and Rajesh Kumar, Optimizing Photovoltaic Charge Generation of Hybrid Heterojunction Core− Shell Silicon Nanowire Arrays: An FDTD Analysis, ACS Omega 3, 4123, (2018).

Civil Engineering


1. Chakraborty, R. and Dey, A. (2018). Influence of Toe Cutting on Seismic Response of a Typical Hill-Slope in North East India. 16th ARC, Taipei, Taiwan. (Abstract Accepted)
2. Chakraborty, R. and Dey, A. (2018) .Stochastic Modelling of the Spatial Variability of Soil. GeoMEast2018, Cairo, Egypt. (Accepted).
3. Chakraborty R., Dey A. (2018). A Comparison of 1D and 2D Spatial Variability in Probabilistic Slope Stability Analysis. International Symposium of Geotechnics for Transportation Infrastructure, Delhi. Pp. 336-341.
4. H. M. Kalita, A. K. Sarma, C. Marthong, D. K. Sarma, A few simple CFD models for flow simulation around groyne, 2nd International Conference on Design, Mechanical and Material Engineering, 14-16 September, Melbourne, Page Nos 1-6, 2017.
5. Chakraborty R., Dey A. (2017). Importance of Spatial Variability on Probabilistic Slope Stability. Indian Geotechnical Conference, Guwahati.
6. H. M. Kalita, A semi implicit finite difference model for dam break flow simulation over complex river bed, National Conference on Hydrology and Watershed Management (NCHWM-2017), Period -24-25 March, Place -NIT Silchar, 2017 .
7. Susmita Sharma, Pankaj Pathak(2017) “Categorization of Biosolids, A Vital Biological Resource for Sustainable Agriculture” Paris France May 18-19, 2017, 19 (5) Part XII. 19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.
8. Pankaj Pathak, Susmita Sharma (2017) “Study of Strontium Sorption onto Indian Bentonite” Paris France May 18-19, 2017, 19 (5) Part XII.19thInternational Conference on Civil, Environmental and Architectural Engineering ICCEAE 2017.
9. Jaswanth G., Kumar S., and Sharma H., “Impact testing Facility: BHISM for Performance based Blast Resistant Design of Reinforced Concrete (RC) Structures”, Procedia Engineering, 173, pp563 – 569, 2017.
10. S.Sharma, P. Pathak, Categorization of Biosolids, A Vital Biological Resource for Sustainable Agriculture, 19th International Conference on Civil and Environmental Engineering, Period -18-19 May, Place -Paris, France, 2017. 8
11. P. Pathak, S. Sharma, Study of Strontium Sorption onto Indian Bentonite, 19th International Conference on Civil and Environmental Engineering, Period -18-19 May, Place -Paris, France, 2017.
12. Comingstarful Marthong, Deba Kumar Sarma & Hriday Mani Kalita (2017), “Effect of aspect ratio and volume fraction of PET fiber on the mechanical properties of PFRC,” 2nd International Conference on Design, Mechanical and Material Engineering, Swinburne Melbourne, 14th-16th Sept. 2017
13. Saroj Mandal, Dibyendu Adak, Anti-microbial efficiency of nano silver-silica modified geopolymer mortar. CONSEC 2016, Politecnico di Milano, Lecco, Lake Como, Italy. 2 (2017) 49-54.

Computer Science And Engineering


1. Singh Akhilendra Pratap, Kumar, G. Hemant, Paik, Subhendu Sekhar, Sinha Roy, Diptendu, “Storage and Analysis of Synchrophasor Data for Event Detection in Indian Power System Using Hadoop Ecosystem.” In 2018 Proceedings of International Conference on Computing, Power and Communication Technologies (GUCON 2018), (Accepted).
2. Pradhan, Buddhadeb, Nandi, Arijit, Sinha Roy, Diptendu, Hui, Nirmal Kumar. “A Game Theoretic Group Coordination Strategy for multi Robot Navigation” In 2018 Proceedings of the 8th International Workshop on Soft Computing Applications (SOFA 2018), (Accepted)
3. Mudali, Geetika, Diptendu Sinha Roy, and K. Hemant Kumar Reddy. “QoS Aware Heuristic Provisioning Approach for Cloud Spot Instances.” In 2017 International Conference on Information Technology (ICIT), pp. 73-78. IEEE, 2017.
4. Mishra, Jyotirmaya, Jitendra Sheetlani, K. Hemant K. Reddy, and Diptendu Sinha Roy. “A Novel Edge-Supported Cost-Efficient Resource Management Approach for Smart Grid System.” In Progress in Computing, Analytics and Networking, pp. 369-380. Springer, Singapore, 2018.
5. Paik, Subhendu Sekhar, Rajat Subhra Goswami, D. S. Roy, and K. Hemant Reddy. “Intelligent Data Placement in Heterogeneous Hadoop Cluster.” In International Conference on Next Generation Computing Technologies, pp. 568-579. Springer, Singapore, 2017.
6. S. Shirinzadeh, K. Datta, R. Drechsler, “Logic Design using Memristors: An Emerging Technology (Embedded Tutorial)”, 48th Intl. Symposium on Multiple-Valued Logic (ISMVL), Linz, Austria, May 2018.
7. A. Zulehner, P.M.N. Rani, K. Datta, R. Wille, I. Sengupta, “Generalizing the Concept of Scalable Reversible Circuit Synthesis for Multiple-valued Logic, 48th Intl. Symposium on Multiple-Valued Logic (ISMVL), Linz, Austria, May 2018.
8. P.M.N. Rani, A. Kole, K. Datta, I. Sengupta, “Improved Decomposition of Multiple-Control Ternary Toffoli Gates Using Muthukrishnan-Stroud Quantum Gates”, 9th Intl. Conference on Reversible Computation, pp. 202-213, Kolkata, India, 2017.
9. L. Marbaniang, A. Kole, K. Datta, I. Sengupta, “Design of Efficient Quantum Circuits Using Nearest Neighbor Constraint in 2D Architecture”, 9th Intl. Conference on Reversible Computation, pp. 248-253, Kolkata, India, 2017.
10. A. Kole, R. Wille, K. Datta, I. Sengupta , “Test pattern generation effort evaluation of reversible circuits ”, 9th Intl. Conference on Reversible Computation, pp. 162-175, Kolkata, India, 2017.
11. A. Kole, P.M.N. Rani, K. Datta, I. Sengupta, R. Drechsler, “Exact Synthesis of Ternary Reversible Functions Using Ternary Toffoli Gates”, 47th Intl. Symposium on Multiple-Valued Logic (ISMVL), pp. 179-184, Novi Sad, Serbia, 2017.
12. A. Kole, K. Datta, “Improved NCV Gate Realization of Arbitrary Size Toffoli Gates”, 30th Intl. Conference on VLSI Design (VLSID), pp 289-294, Hyderabad, India, 2017.
13. S. Burman, P. Rangababu, K. Datta, “Development of Dynamic Reconfigurable implementation of AES on FPGA platform”, 2nd Intl. Conference on Devices in Integrated Circuits (DevIC) pp-247-251, Kalyani, India.
14. A. Kole, K. Datta, R. Wille, I. Sengupta, “A nearest neighbour quantum cost metric for the reversible circuit level”, IEEE Region 10 Conference (TENCON), Nov 2017, Penang, Malayasia.
15. P.L. Thangkhiew, R. Gharpinde, D.N. Yadav, K. Datta, I. Sengupta, “Efficient implementation of adder circuits in memristive crossbar array”, IEEE Region 10 Conference (TENCON), Nov 2017, Penang, Malayasia.
16. “Planar Projection of Polytopes using Hough Transforms”, A. Gurung and R. Ray, IEEE International Conference CONECCT, Bangalore, March 16-18, 2018.
17. Shubham Singh, Surmila Thokchom, “Public integrity auditing for shared dynamic data”, 6th International conference on Smart Computing and Communication (ICSCC-2017), NIT Kurukshetra, 7-8 Dec 2017 .
18. Sutirtha Chakraborty, Shubham Singh, Surmila Thokchom, “Integrity checking using third party auditor in Cloud storage”, 2018 11th International Conference on Contemporary Computing (IC3), Jaypee Institute of Information Technology, Noida, 2-4 August 2018.
19. S. Roy, D. Kumar, A. Dandapat and P. Saha, “Discretized Sinusoidal Waveform Generators for Signal Processing Applications,” accepted in International Conference on Trends in Electronics and Informatics (ICOEI 2018), Tirunelveli, India, 11-12 May 2018.
20. P. Sahu, B. Khamari, B. Balabantaray and B. B. Biswal, “Geodesic Approach For Trajectory Planning Of Mobile Robot Manipulators”, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME 2018), (Accepted).

Electrical Engineering


1. Vulisi Narendra Kumar, Gayadhar Panda “FPGA Implementation of Power Management Algorithm for Wind Energy Storage System with Kalman Filter MPPT Technique” 31st International Conference on VLSI Design and 2018 17th International Conference on Embedded Systems (VLSID), 2018, pp.449-450.
2. Smitha Joyce Pinto, Gayadhar Panda “Combinational control scheme for utility interactive inverter system” IEEE Transportation Electrification Conference (ITEC-India), 2017, pp.1-6.
3. Smitha Joyce Pinto, Gayadhar Panda, “Performance assessment of islanding detection using complex wavelet in a three-phase utility interactive inverter system” IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), 2017, pp. 1-6.
4. Vulisi Narendra Kumar, Bonu Ramesh Naidu, Gayadhar Panda “Hardware-in-loop validation of a dynamic control employed for a hybrid DC microgrid incorporating high gain DC-DC power stages” IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), 2017, pp.1-6.
5. Bonu Ramesh Naidu, Gayadhar Panda “A hybrid fuel cell-supercapacitor system employing adaptive control to overcome fuel starvation phenomenon of fuel cell” IEEE Innovations in Power and Advanced Computing Technologies (i-PACT), 2017, pp.1-5.
6. Pratap Sekhar Puhan, Pravat Kumar Ray; Gayadhar Panda “Performance improvement of shunt active power filter with combined control technique”, IEEE International Conference on Emerging Trends & Innovation in ICT (ICEI), 2017, pp. 56-61.
7. S.K.Prince, K.Panda, V. Narendra Kumar and Gayadhar Panda, “Power Quality Enhancement in a Distribution Network Using PSO Assisted Kalman Filter – Based Shunt Active Power Filter”, in ENGINEER INFINITE e-TechNxt-2018, march 13-14, Pune. [Presented].
8. Satabdy Jena, Gayadhar Panda and Pierluigi Siano, “HIL based Coordinated Control of grid interfaced Distributed Generation assisted Battery Swapping Station”, INDICON-2017.
9. Chiranjit Sain, P K Biswas, Atanu Banerjee, Sanjeevikumar Padmanaban- “An Efficient Flux Weakening Control Strategy of a Speed Controlled Permanent Magnet Synchronous Motor Drive for Light Electric Vehicle Applications”- published in the proceedings of the IEEE Calcutta Conference, 2017 (CALCON 2017), 2-3 December, 2017, 10.1109/CALCON.2017.8280744. pp.304-308.
10. Arunima Dutta, Sanjoy Debbarma, “Contribution of Electric Vehicles for Frequency Regulation in Presence of Diverse Power Sources and Transmission Links”, ICIT 2018, Period -February, Place -Lyon, France, 2018.
11. Ksh. Milan Singh; Sanjoy Debbarma, Piyush Pratap Singh, “Doppler velocity measurement using closed-loop Goertzel algorithm in PLL technique”, ICIT 2018, Period -February, Place -Lyon, France, 2018.
12. J. Samantaray, P. P. Singh, and B K Roy, A Comparative Study of PI & PID Based SMC for Anti-synchronization of Vallis System, 5th International Conference on Computer Applications in Electrical Engineering - Recent Advances (CERA), IIT Roorkee, 2017.
13. J. Samantaray, P. P. Singh, and B K Roy, A Comparative Study of PI and PID Based SMC for Anti-Synchronisation of LorenzStenflo Chaotic System, IEEE INDICON, IIT Roorkee, Roorkee, Uttarakhand, India, December 15-17, 2017.
14. Piyush Pratap Singh, Jay Prakash Singh, and B K Roy, Tracking Control and Synchronization of Bhalekar-Gejji Chaotic Systems using Active Backstepping Control, 2018 IEEE International Conference on Industrial Technology (ICIT), Lyon, France, February 20-22, 2018.
15. R. Roy, K. K. Prabhakar and P. Kumar, “equivalent circuit for inverter fed induction motor,” in PES 2018 general meeting, USA.
16. Gaurav Bhatt and Shaik Affijulla, “Analysis of Large Scale PV Penetration Impact on IEEE 39-Bus Power System”, IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON), Riga, Latvia, pp. 1-6, Oct 2017.
17. Himanshu Gupta and Supriyo Das, “Statistical Analysis of Oil Insulation Breakdown Voltage”, Proceedings of 2017 IEEE IEEM, December 2017, Singapore
18. Ksh. Milan Singh, Sanjoy Debbarman and Piyush Pratap Singh, “Doppler Velocity Measurement Using Closed-loop Goertzel Algorithm in PLL Technique,” IEEE ICIT International Conference, Feb. 20-22, 2018, Lyon, France.

Electronics & Communication Engineering


1. V. M. Tripathi, S. Mishra, J. Saikia, and A. Dandapat, A Low-Voltage 13T Latch-Type Sense Amplifier with Regenerative Feedback for Ultra Speed Memory Access, 2017 30th International Conference on VLSI Design and 2017 16th International Conference on Embedded Systems (VLSID), Period –Jan, Place –Hyderabad, India, Page -341-346, 2017.
2. Puja ghosh, Rangababu P, Design and Implementation of Ternary Content Addressable Memory (TCAM) based Hierarchical Motion Estimation for Video Processing, International Symposium on VLSI Design and Test, Period -29-06-2017 to 2-07- 2017, Place –IIT Roorkee, Page -742-750, 2017.
3. Rituparna Choudary, Rangababu P, Design and Implementation of Mixed Parallel and Dataflow Architecture for Intra-prediction Hardware in HEVC Decoder, International Symposium on VLSI Design and Test, Period -29-06-2017 to 2-07-2017, Place –IIT Roorkee, Page -557-569, 2017.
4. S. Gautam, A.Gupta, S. Majumdar, A. Patraa, R. Dhabalia, J. Teraiya, Prediction of particulate matter concentration profile in an opencast copper mine in India using an artificial neural network model, Recycle – International conference on waste management, IIT Guwahati, 2018.
5. M. Khalid, S. Majumdar, M.J. Siddiqui, Reduction of hardware complexity of digital circuits by threshold logic gates using RTDs, 3rd International Conference on Information and Communication Technology for Intelligent Systems, Ahemdabad, 2018.
6. R.U. Ahamed, P. Saha, “Modeling of Threshold Voltage and Subthreshold Current for P-Channel Symmetric Double-Gate MOSFET in Nanoscale Regime” IEEE iNIS, 2017, pp. 179-183, Dec. 2017.
7. R. Kant and V. Kumar, “Approximate Computing for Machine Learning”, 2nd International Conference on Communication, Computing and Networking, Chandigarh, India, March 29-30, 2018.

Mechanical Engineering


1. G. B. Mahanta, B. B. V. L. Deepak, B. B. Biswal, Amruta Rout, and B. M. Gunji, “Design Optimization of Robotic Gripper Links Using Accelerated Particle Swarm Optimization Technique.” In Proceedings of the Second International Conference on Computational Intelligence and Informatics, 2018, pp. 337-345. Springer, Singapore
2. G. B. Mahanta, Amruta Rout, B. M. Gunji, B. B. V. L. Deepak, and B. B. Biswal, “Application of Hybrid Nelder-Mead Bat Algorithm to Improve the Grasp Quality during the Automated Robotic Grasping.” Procedia Computer Science 133, 2018.
3. B. M. Gunji, B.B.Deepak, B.B. Biswal, G.B.Mahanta, and Amruta Rout, , Robotic Optimal Assembly Sequence Using Improved Cuckoo Search Algorithm. Procedia Computer Science, 2018, 133, pp.323-330.
4. Amruta Rout, M. Dileep, G.B. Mahanta, B. B. V. L. Deepak, and B. B. Biswal. “Optimal time-jerk trajectory planning of 6 axis welding robot using TLBO method.” Procedia Computer Science133 ,2018, 537-544.
5. G. B. Mahanta, B. B. V. L. Deepak, and B. B.Biswal, “Geometric modelling and design optimization of a robotic gripper using meta-heuristic optimization techniques”, International Conference on Robotics and Artificial Intelligence” May 21-22, 2018 Los Angeles USA
6. B. M. Gunji, P. K .Sahu, B. B. V. L. Deepak, and B. B. Biswal.”Modified BAT Algorithm for Optimum Assembly Sequence Planning.” In IOP Conference Series: Materials Science and Engineering, , 2018, vol. 377, no. 1, p. 012091. IOP Publishing.
7. B. M. Gunji, B.B. Deepak, MR. Bahubalendruni and B.B. Biswal, (2017), Optimal Assembly Sequence Planning Using Hybridized Immune-Simulated Annealing Technique. Materials Today: Proceedings. 2017 Jan 1;4(8):8313-22.
8. J. Vinod, P. Venkaiah, B. K. Sarkar, Francis Turbine Igv Control Under Force Estimation, INCOM18, Period -4 t0 6 January 2018, Place -Jadavpur University, Kolkata, Page -769-772, 2018.
9. P. Venkaiah, K. Das, B. K. Sarkar, Power Control Of The Small Scale Variable Speed Variable Pitch Wind Turbine, INCOM18, Period -4 t0 6 January 2018, Place -Jadavpur University, Kolkata, Page -795-798, 2018.
10. P. Venkaiah B. K.. Sarkar, Position Control of the Hydraulically Actuated Francis Turbine Inlet Guide Vane, ASME 2017 Power Conference Joint With ICOPE-17 collocated with the ASME 2017 11th International Conference on Energy Sustainability, the ASME 2017 15th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2017 Nuclear Forum, Period -June 26–30, 2017, Place -Charlotte, North Carolina, USA, Page -V002T09A004; 9 pages, 2017.
11. P. Venkaiah, K. Das, E. K. Mawsor and B. K. Sarkar, Wind Turbine Pitching System Design And Controlin The Context Of NorthEast India, Proceedings of the 6th International Conference in Advances in Energy Research (ICAER), Dec 12- 14, 2017, IIT Bombay, India.
12. M.A. Singh, D.K. Sarma, H.M. Kalita, C. Marthong, Analysis of material removal and surface characteristics in machining multi walled carbon nanotubes filled alumina composites by WEDM process, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.
13. C. Marthong, D.K.Sarma, H.M. Kalita, Effect of aspect ratio and volume fraction of PET fibre on the mechanical properties of PFRC, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.
14. H.M. Kalita, A.K. Sarma, C. Marthong, D.K.Sarma, 2nd International Conference on Design, Mechanical and Materials Engineering (D2ME 2017), Period -14-09-2017 to 16-09-2017, Place -Swinburne University, Melbourne, Australlia, Page -6, 2017.
15. A.K.S. Kushwaha, R.S. Das, A simplified ANN model to assess the performance of a liquid desiccant air-conditioning system, International Conference on Renewable and Sustainable Energy, Period -12-13 April, Place -Coimbatore, 2017.
16. P.J. Bezbaruah, A. Das, R.S. Das, B.K. Sarkar, Numerical investigation on triangular fin based solar air heater, 6th International Conference on Advances in Energy Research. Paper ID: 361, December 12-14, 2017, IIT Bombay.
17. P. Kumar, A. Parveen, R.S. Das, “Coupled Heat and Mass Transport in an Indirect Membrane Contactor with Wicking Material for Liquid Desiccant Dehumidification”, Paper No. IHMTC2017-05-0607, International Heat and Mass Transfer Conference (IHMTC-2017), December 27-10, 2017, BITS Pilani, Hyderabad.
18. Alom, N., Kumar, N and Saha, U.K., 2017. “Aerodynamic performance of an elliptical-bladed Savonius rotor under the influence of number of blades and shaft,” Paper No. GTIndia2017-4554, ASME Gas Turbine India Conference, December 7–8, Bangalore, India.
19. Alom, N., Borah, B., and Saha, U.K., 2018, “An insight into the drag and lift characteristics of modified Bach and Benesh profiles of Savonius rotor,” Energy Procedia, Vol. 144, pp. 50-56.
20. A.C. Chandekar and B.K. Debnath, “Design and Optimization of Air-Biogas Mixing Device for Dual Fuel Diesel Engines”, Proceedings of the 6th International Conference in Advances in Energy Research (ICAER), Paper No. 221, Dec 12- 14, 2017, IIT Bombay, India.
21. A.C. Chandekar and B.K. Debnath, “Investigating the Flow Characteristics of an Air-Biogas Mixing Device through Computational Fluid Dynamics”, Proceedings of the 44th National Conference on Fluid Mechanics and Fluid Power (FMFP), Paper No. 167, Dec 14-16, 2017, Kerala, India.
22. S. Roy, T. Bose, K. Debnath, “Influence of the Delamination Geometry on the Shear Behaviour of Glass/Epoxy Composites”, National Conference on Advanced Materials, Manufacturing and Metrology (NCAMMM 2018), February 16-17, 2018, CSIRCMERI, Durgapur, India.
23. P. Nemalipuri, M. K. Pradhan, H. C. Das, R. N. Mahapatra, B. Das, “Prediction of Air Pollutants Emitting from Chimney of A CHP Using CFD” National Conference on Emerging Trends in Engineering, Science and Manufacturing, (ETESM-2018), 28th -29 th Mar. 2018, IGIT, Sarang.

Humanities & Social Sciences


1. R. Lyngwa & P. S. Mangang. ‘Vijay Tendulkar’s In-yer-face Treatment of Oppression and Violence: Themes and Techniques in Gidhade.’ A Two Day International Conference on Multiculturalism on 24th & 25th Jan 2018 at Manipur University.
2. A. Ashangbam & P. S. Mangang. ‘Masculinity and the Disabled Men.’ A Two Day International Conference on Multiculturalism on 24th & 25th Jan 2018 at Manipur University.
3. P. S. Mangang. ‘How Ibsen Created Tension in his Plays?’ A Two Day International Conference on Multiculturalism on 24th & 25th Jan 2018 at Manipur University.
4. S. K. Jaiswal, A. D. Sarma and 3 others. ‘EvoCut: A New Generalization of Albert-Barabasi Model for Evolution of Complex Networks.’ 22nd Conference of Finnish-Russian University Cooperation in Telecommunications (FRUCT), 15th to 18th May 2018 at Jyvaskyla, Finland.

Civil Engineering


1. Comingstarful Marthong (2019). “Behavior of repaired RAC beam-column joints using steel welded wire mesh jacketed with cement mortar”. Advance Concrete Construction, Techno Press, Accepted.
2. Hopeful Syiemiong, Comingstarful Marthong (2019). “Effect of moisture on the compressive strength of low-strength hollow concrete blocks”. Computer and Concrete, Techno Press. 23(4), pp. 267-272.
3. Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and galvanized steel wire mesh”, Earthquake and Structures, Techno Press. 16 (3), pp. 253-263.
4. H. H. Kalita, R. Das, A. Hajong, N. Kumar, D. Kharnaior, H. C. Dkhar, Experimental and numerical flow simulation over weirs, Water Resources, Accepted for publication.
5. H. M. Kalita, A simple and efficient numerical model for simulating one dimensional dam break flows, International Journal of Hydrology Science and Technology, In press.
6. 6. D. Podder, O.P. Gupta, S. Das, N.R. Mandal, Experimental and numerical investigation of effect of welding sequence on distortion of stiffened panels, Welding in the World, 2019, Accepted, https:// doi.org/10.1007/s40194-019-00747-8.
7. D. Adak, S. Mandal (2019). Strength and Durability Performance of Fly Ash–Based ProcessModified Geopolymer Concrete. Journal of Materials in Civil Engineering, © ASCE, Vol. – 31, Issue No – 9, `Page No - 04019174-1 to 04019174-8.
8. Comingstarful Marthong, Risukka N. Pyrbota, Stevenly L. Trona, Lam-I D. Mawroha, Md. Sakil A. Choudhurya and Ganesh S. Bhartia (2018). “Micro-concrete composites for strengthening of RC frame made of recycled aggregate concrete”, Computers and Concrete, Techno Press, 22 (5), pp. 461-468.
9. Comingstarful Marthong (2018). Behaviour of recycled aggregate concrete beam-column connections in presence of PET fibers at the joint region, Computers and Concrete, Techno Press, 2018, 21(6), pp. 669-679.
10. D. Podder, S. Das, N. R. Mandal, Distortions in Large Stiffened Ship Panels caused by Weldings: An Experimental Study, Journal of Ship Production and Design, 2018, Accepted, https://doi. org/10.5957/JSPD.180019.
11. M. Maiti, M. Sarkar, S. Xu, S. Das, D. Adak (2018). Application of silica nanoparticles to develop faujasite nano-composite for heavy metal and carcinogenic dye degradation. Environmental Progress & Sustainable Energy, Vol. – 38, Issue - s1, Page no - S15 - S23.
12. P. Pathak, S. Sharma, Sorption isotherms, kinetics and thermodynamics of the contaminants onto Indian soils, Journal of Environmental Engineering, ASCE, Vol.144 (10), 2018.
13. N.Koshy, S.S U, S.Sharma,J. Joseph,V.Sharma, D.N. Singh, B. Jha, Characterization of the Soil Samples from the Lonar Crater, India, Geotechnical Engineering Journal of the SEAGS & AGSSEA, Vol.49(10), 2018.

Computer Science And Engineering


1. Sinha Roy, Diptendu, Behera, Ranjit K, Reddy, K. Hemant Kumar, Buyya, Rajkumar, (2018) “A Context- Aware, Fog Enabled Scheme for Real-Time, Cross VerticalIo T Applications”, IEEE Internet of Things Journal, DOI10.1109/JIOT.2018.2869323.
2. Pradhan, B., Roy,D. S. , & Hui, N. B. (2018). Motion planning and coordination of multi-agent systems. International Journal of Computational Vision and Robotics, 8(5), 492-508.
3. Reddy, K. H. K, Pandey, Vishal, Roy, D. S, (2018), A Novel Entropy Based Dynamic Data Placement Strategy for Data Intensive Applications in Hadoop Clusters, International Journal of Big Data Intelligence, Inderscience Publication.
4. Rao, Nalluri Madhu Sudana, Krithivasan Kannan, Xiao-zhi Gao, and Diptendu Sinha Roy. “Novel classifiers for intelligent disease diagnosis with multi-objective parameter evolution.” Computers & Electrical Engineering 67 (2018):483-496.
5. Behera, Ranjit Kumar, K. Hemant Kumar Reddy, and Diptendu Sinha Roy. “Modeling and assessing reliability of service- oriented internet of things.” International Journal of Computers and Applications (2018):1-12.
6. Pradhan, B., Vijayakumar, V., Hui, N. B., & Sinha Roy, D. (2019).Intelligent navigation of multiple coordinated robots. Journal of Intelligent & Fuzzy Systems, (Preprint), 1-10.
7. Mallikarjuna, B.,Pathirikkat ,G., Sinha Roy, D., Bharata Reddy, M. J. (2019), A Real-Time Synchronized Harmonic Phasor Measurements-Based Fault Location Method for Transmission Lines. Journal of Control, Automation and Electrical Systems (Springer), https://doi.org/10.007/ s40313-019-00500-y (Accepted).
8. Rajappa, M., Krithivasan, K., & Roy, D. S. (2018). Helly hypergraph based matching frame work using deterministic sampling techniques for spatially improved point feature based image matching. Multimedia Tools and Applications, 1-25.
9. B K Balabantaray, R N Mahapatra and B B Biswal, “Efficient Part Recognition Method in Vision Guided Robots using Orthogonal Moments, International Journal of Engineering & Technology, 7 (4.41) (2018) 60-65, 2018, DOI:10.14419/ijet.v7i4.41.24301.
10. Sasmita Mohapatra, R. N. Mahapatra, B. B. Biswal, B K Balabantray, A. K. Behera, “A Deterministic Model for Remanufacturing Inventory for Reverse Supply Chain, International Journal of Engineering & Technology, 7 (4.41) (2018) 207-210, DOI:10.14419/ijet.v7i4.41.24529.
11. Soumen Moulik, Shubhankar Majumdar, Fall Sense: An automatic fall detection and alarm generation system in IoT-enabled environment, IEEE Sensors Journal, Nov.2018.
12. Soumen Moulik, Sudip Misra, Chandan Chakraborty, Performance Evaluation and Delay-Power Trade-off Analysis of ZigBee Protocol, IEEE Transactions on Mobile Computing, Vol. 18, No. 2, pp. 404 - 416, Feb.2019.
13. P. L. Thangkhiew, K. Datta, “Scalable In-Memory Mapping of Boolean Functions in Memristive Crossbar Array Using Simulated Annealing”, Journal of Systems Architecture, DOI:10.1016/j. sysarc.2018.07.002,2018 (Accepted).
14. L. Marbaniang, K. Datta, “Efficient Design of Quantum Circuitsusing Nearest Neighbor Constraint in 3D Architecture”, Journal of Circuits, Systems and Computers, Vol. 28, No. 5, pp. 1950084:1- 1950084:19, 2019, DOI: 10.1142/S0218126619500841, 2018(Accepted).
15. P. L. Thangkhiew, R. Gharpinde, K. Datta, “Efficient Mapping of Boolean Functions to Memristor Crossbar using MAGICNOR Gates”, IEEE Transactions on Circuits and Systems-I: Regular Papers, Vol. 65, No. 8, pp. 2466-2476, August2018.
16. R. Gharpinde, P. L. Thangkhiew, K. Datta, I. Sengupta, “A Scalable In-Memory Logic Synthesis Approach using Memristor Crossbar”, IEEE Transactions on Very Large Scale Integration Systems, Vol. 26, No. 2, pp. 355-366, February2018.
17. Kole, K. Datta, I. Sengupta, “A New Heuristic for N-Dimensional Nearest Neighbor Realization of a Quantum Circuit”, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, Vol. 37, No. 1, pp. 182-192, January2018.
18. Gurung, A., Ray, R., Bartocci, E., Bogomolov, S., &Grosu, R. (2018). Parallel reachability analysis of hybrid systems inxspeed. International Journal on Software Tools for Technology Transfer,1-23.
19. Shubham Singh, Akhilendra Pratap,”Ensuring Data Security in Cloud Storage”, International Journal of Machine Learning and Computing, April 2018. (Accepted).
20. S Thokchom, S., & Saikia, D. K. (2019). Privacy Preserving and Public Auditable Integrity Checking on Dynamic Cloud Data. IJ Network Security, 21(2), 221-229.

Electrical Engineering


1. Piyush Pratap Singh, K. M. Singh and B. K. Roy, Chaos control in biological system using recursive backstepping sliding mode control, Eur. Phys. J. Special Topics, Vol. 227, pp. 731-746, October 2018.
2. Kaushik Neogi , Moumita Sadhu, Niladri Das, Pradip Kumar Sadhu, Agamani Chakraborty, Ankur Ganguly, Atanu Banerjee “A new approach for the stability analysis of high-frequency series resonant inverter-fitted induction heater”- Ain Shams Engineering Journal, Elsevier, Vol.10, No.1, April, 2018,pp.185-194.
3. Ksh Milan Singh, “Simultaneous Estimation of Moving-Vibration Parameters by Sliding Goertzel Algorithm in PLL Technique,” IEEE Trans. Instrum. Meas., vol. 2, pp. 334-343, Feb., 2019.
4. Shaik Affijulla, Praveen Tripathy,“Development of Dictionary-Based Phasor Estimator Suitable for P-Class Phasor Measurement Unit,” IEEE Transactions on Instrumentation and Measurement, vol. 67, no.11, pp. 2603-2615, Nov 2018.
5. K. P. Panda, S. S. Lee and Gayadhar Panda, “Reduced Switch Cascaded Multilevel Inverter with New Selective Harmonic Elimination Control for Standalone Renewable Energy System”, IEEE Transactions on Industry Applications, Early Access, March 2019.
6. S. Sahoo, B. Subudhi, Gayadhar Panda, “Comparison of Output Power Control Performance of Wind Turbine using PI, Fuzzy Logic and Model Predictive Controllers”, International Journal Of Renewable Energy Research, vol. 8, no. 2, June 2018.
7. Moushumi Patowary, Gayadhar Panda, Bimal C Deka, “Power quality enrichment using enhanced adaptive control-detuned-LC proposal in voltage source control conquered distributed generation with hardware implementation”, Transactions of the Institute of Measurement and Control (SCIE), October 2018, Pages: 0142331218801157.
8. Moushumi Patowary, Gayadhar Panda, Bimal C Deka, “A Comparative Study on Neural Network Based Controllers Used in Grid-Interactive Solar System”, International Journal of Emerging Electric Power Systems (IJEEPS) (ESCI), November 2018, https://doi.org/10.1515/ijeeps-2018-0019.
9. Parusharamulu Buduma,Gayadhar Panda, “Robust Nested Loop Control Scheme for LCL-Filtered Inverter-Based DG Unit in Grid-Connected and Islanded Microgrid Modes” IET Renewable Power Generation, August 2018, vol. 12, no. 11, pp.1269-1285.
10. 10. Kaibalya Prasad Panda, Gayadhar Panda, “Application of swarm optimization-based modified algorithm for selective harmonic elimination in reduced switch count multilevel inverter” IET Power Electronics, June 2018, vol. 11, no. 8, pp.1472-1482.
11. Bonu Ramesh Naidu, Gayadhar Panda, and Pierluigi Siano “A Self-Reliant DC microgrid: Sizing, Control, Adaptive Dynamic Power Management and Experimental Analysis”, IEEE Transactions on Industrial Informatics, August 2018, vol. 14, no. 8, pp. 3300-3313.
12. P. Garanayak, G. Panda and S. Mishra, “Harmonic elimination using SW based HSAPF system and evaluation of compensation effect employing ADALINE-DFFRLS algorithm”, European Power Electronics and Drives, pp. 1-18, June 2018.
13. K. P. Panda, A. Anand, P. R. Bana and Gayadhar Panda, “ Novel PWM Control with Modified PSO-MPPT Algorithm for Reduced Switch MLI Based Standalone PV System”, International Journal of Emerging Electric Power Systems (IJEEPS) (ESCI), September 2018.

Electronics & Communication Engineering


1. S. Moulik, S. Majumdar, “FallSense: An automatic fall detection and alarm generation system in IoT-enabled environment”, IEEE Sensor, 2018 (Early Access).
2. S.D. Thabah, P. Saha, “New Design Approaches of Reversible BCD Encoder using Peres and Feynman Gates”, Accepted, 2019 .
3. P. Saha, P. Samanta,” Design and Architecture of new 11:2 Decimal Compressors”, Sadhana, Acceped 2019
4. Ashishkumar Prabhakar Gudmalwar, Ch V Rama Rao and Anirban Dutta, “Improving the performance of the speaker emotion recognition based on low dimension prosody features vector”, in International Journal of Speech Technology, doi.org/10.1007/s10772-018-09576-4, pp. 1-11, 2018.
5. Farhana Begum, S. Mishra ; A. Dandapat,, “Low Power 10-Bit Flash ADC with Divide and Collate Sub ranging Conversion Scheme”, Transactions on Computer Science & Engineering and Electrical Engineering, Scientiairanica, DOI: 10.24200/SCI.2019.5162.1129, 2019.
6. Anup Dandapat, “Methodologies for CAM and ADC design”, CSI Transactions on ICT, Springer, June 2019, DOI https://link.springer.com/article/10.1007%2Fs40012-019-00250-x. 2019.
7. Farhana Begum, S. Mishra ; Najrul Islam ; A. Dandapat,, “A 10-bit 2.33 fJ/conv. SAR-ADC with High Speed Capacitive DAC Switching using a Novel Effective Asynchronous Control Circuitry”, Analog Integrated Circuits and Signal Processing, Springer, https://doi.org/10.1007/s10470-019- 01450-w , 2019.
8. Farhana Begum, S. Mishra ; Najrul Islam ; A. Dandapat,, “Frequency Improvement of 10-bit SARADC using TSPC based Control Circuitry”, IEEE VLSI Circuits & Systems Letter (VCAL), Vol-5, issue-1, pp-1-8, 2019.
9. S. W. Hussain, T. V. Mahendra ; S. Mishra ; A. Dandapat,, “Match-Line Division and Control to Reduce Power Dissipation in Content Addressable Memory”, IEEE Transactions on Consumer Electronics, Vol. 64, Issue 3, pp-early access , 2018.
10. Shashi Kumar, Pradeep Kumar Rathore, B.S. Panwar, J. Akhtar, “Development of a Current Mirror Integrated Pressure Sensor using CMOS-MEMS Cofabrication Techniques”, Microelectronics International Journal, Volume 35, No. 4, pp. 203-210, 2018

Mechanical Engineering


1. S Datta, BB Biswal, Experimental Studies on Electro-Discharge Machining of Inconel 825 Super Alloy using Cryogenically Treated Tool/Workpiece,Measurement, Volume 145, 2019,Page Nos 611-630
2. BBVL Deepak, G. B. Murali, MVA R. Bahubalendruni, B.B. Biswal, Assembly sequence planning using soft computing methods: A review, Proc IMechE Part E: J Process Mechanical Engineering, Page Nos 1–31, 2019
3. A. Das, S. K. Patel, T. K. Hotta, B. B. Biswal, Statistical analysis of different machining characteristics of EN-24 alloy steel during dry hard turning with multilayer coated cermet inserts, Measurement Volume 134, February 2019, Page Nos 123-141
4. Gunji Bala Murali, B. B. V. L. Deepak, Golak Bihari Mahanta, Amruta Rout, B. B. Biswal, Design for Assembly Approach for Energy-Efficient Optimal Assembly Sequence Planning Using Improved Firefly Algorithm Research into Design for a Connected World 2019, Page Nos 665-675.
5. G. B. Mahanta, B. B. V. L. Deepak, M. Dileep, B. B. Biswal, S. K. Pattanayak, Prediction of Inverse Kinematics for a 6-DOF Industrial Robot Arm Using Soft Computing Techniques, Soft Computing for Problem Solving 2018, Page Nos 519-530.
6. G. Bala Murali B. B. V. L. Deepak B. B. Biswal Bijaya Kumar Khamari, Integrated Design for Assembly Approach Using Ant Colony Optimization Algorithm for Optimal Assembly Sequence Planning, 2018, Computational Intelligence in Data Mining pp 249-259\|
7. Pradip Kumar Sahu, Gunji Balamurali, Golak Bihari Mahanta,Bibhuti Bhusan Biswal, A Heuristic Comparison of Optimization Algorithms for the Trajectory Planning of a 4-axis SCARA Robot Manipulator, 2018 Computational Intelligence in Data Mining pp 569-582\|
8. Balamurali Gunji, B. B. V. L. Deepak, Amruta Rout, Golak Bihari Mohanta, B. B. Biswal, Hybridized Cuckoo–Bat Algorithm for Optimal Assembly Sequence Planning, Soft Computing for Problem Solving, 2019, pp 627-638
9. M. V. A. Raju Bahubalendruni, Bibhuti Bhusan Biswal, An Efficient Stable Subassembly Identification Method Towards Assembly Sequence Generation, National Academy Science Letters, 2018, Volume 41, Issue 6, pp 375–378
10. A. Das, N. Tirkey, S. K. Patel, S. R. Das, B. B. Biswal, A Comparison of Machinability in Hard Turning of EN-24 Alloy Steel Under Mist Cooled and Dry Cutting Environments with a Coated Cermet Tool, Journal of Failure Analysis and Prevention 2019, Volume 19, (1) pp 115–130\|
11. C. Upadhyay , Rahul , S. Datta , S. S. Mahapatra , B. B. Biswal An experimental investigation on electro discharge machining of Inconel 601, International Journal of Industrial system and engineering.
12. J. Bezbaruah, R. S. Das, B. K. Sarkar, Thermo-hydraulic performance augmentation of solar air duct using modified forms of conical vortex generators, Heat Mass Transfer, Page Nos 1-17, 2018. https://link.springer.com/article/10.1007/s00231-018-2521-1#citeas
13. B. K. Sarkar, Modeling and Validation of a 2-DOF Parallel Manipulator for Pose Control Application Reference, Robotics and Computer Integrated Manufacturing, Vol.-50, Page Nos -234-241, 2018. http://www.sciencedirect.com/science/article/pii/S0736584516302903
14. D. Sharma, B. K. Debnath, Computational investigation of porous media combustion technology in spark ignition engine, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2019, DOI 10.1007/s40997-019-00285-0.
15. U. Kashyap, K. Das, B. K. Debnath, Numerical and experimental study of the effect of secondary surfaces fixed over a rectangular vortex generator, Journal of Thermal Science and Engineering Applications, 2019, DOI:10.1115/1.4043007.
16. U. Kashyap, K. Das, B. K. Debnath, Effect of surface modification of a rectangular vortex generator on heat transfer rate from a surface to fluid: An extended study, International Journal of Thermal Sciences, Vol.-134, Page Nos -269–281, 2018.
17. U. Kashyap, K. Das, B. K. Debnath, Numerical and Experimental Study of the Effect of Secondary Surfaces Fixed over a Rectangular Vortex Generator, Journal of Thermal Science and Engineering Application, 1948-5085, 2019.
18. Alom, N., and Saha, U. K., 2019. Examining the aerodynamic drag and lift characteristics of a newly developed elliptical- bladed Savonius rotor, ASME Journal of Energy Resources Technology, Vol. 141, No. 5, p. 051201.
19. Alom, N., and Saha, U. K., 2019. Evolution and progress in the development of Savonius wind turbine rotor blade profiles and shapes, ASME Journal of Solar Energy Engineering, Vol. 141, No.3, p. 030801.
20. Ranjan, R. K., Alom, N., Singh, J., and Sarkar, B. K., 2019, “Performance investigation of cross flow hydro turbine with the variation of blade and nozzle entry arc angle” Energy Conversion and Management, Vol. 182, pp.41–50
21. Alom, N., and Saha, U. K., 2019. Influence of blade profiles on Savonius rotor performance: Numerical simulation and experimental validation, Energy Conversion and Management, Vol. 186, pp: 267-277
22. Alom, N., and Saha, U. K., 2019. Drag and lift characteristics of a novel elliptical-bladed Savonius rotor with vent augmenters, ASME Journal of Solar Energy Engineering, Vol. 141, No. 5, p. 051007.
23. M. Roy Choudhury and K. Debnath. Experimental Analysis of Tensile and Compressive Failure Load in Single-Lap Bolted Joint of Green Composites. Composite Structures, Vol. 225, 111180, 2019.
24. S. Kachhap, A. Singh, and K. Debnath. A Study of Material Removal during Electrical-Discharge Drilling of Hybrid Metal Matrix Composites. Journal of Scientific & Industrial Research, Vol. 78(6), pp. 364-367, 2019.
25. H. Dutta, K. Debnath, and D.K. Sarma. A Study of Material Removal and Surface Characteristics in Micro-electrical Discharge Machining of Carbon Fiber-Reinforced Plastics. Polymer Composites, 2019. (DOI: 10.1002/pc.25264)
26. K. Debnath, V. Dhawan, I. Singh, and T.S. Srivatsan. Wear and Frictional Behaviour of Composites Filled with Agro-Based Waste Materials. Emerging Materials Research, Vol. 8(1), pp. 84-93, 2019.
27. M. Roy Choudhury, M.S. Srinivas, and K. Debnath. Experimental Investigations on Drilling of Lignocellulosic Fiber Reinforced Composite Laminates. Journal of Manufacturing Processes, Vol.34, pp. 51-61, 2018.
28. S. Kachhap, A. Singh, and K. Debnath. Electric Discharge Drilling of Hybrid Metal Matrix Composites using Different Tool Electrodes. Journal of Scientific & Industrial Research, Vol. 77(6), pp. 325-329, 2018.
29. S. Roy, T. Bose, and K. Debnath. Detection of Local Defect Resonance Frequencies using Bicoherence Analysis. Journal of Sound and Vibration, Vol. 443, pp. 703-716, 2019.
30. S. Roy, T. Bose. Efficient determination of local defect resonance frequencies from bicoherence plots using double excitations. Mechanical Systems and Signal Processing 127, 595-609.
31. Deba Kumar Sarma, Meinam Annebushan Singh, Machining of thin sections using multi-pass Wire Electrical Discharge Machining process, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Accepted, (In press), 2019.
32. M. A. Singh, Sanjib Kr. Rajbongshi, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface and porous recast layer analysis in μ-EDM of MWCNT-Al2O3 composites, Materials and Manufacturing Processes, Taylor & Francis, Vol.34, No.5, Page Nos.567-579, 2019
33. Sanjib Kr. Rajbongshi, Meinam annebushan Singh, Deba Kumar Sarma, A comparative study in machining of AISI D2 steel using textured and non-textured coated carbide tool at the flank face, Journal of Manufacturing Processes, Elsevier, Vol.-36, Page Nos- 360-372, 2018
34. Sanjib Kr. Rajbongshi, Deba Kumar Sarma, A comparative study in prediction of surface roughness & flank wear using artificial neural network & response surface methodology method during hard turning in dry and forced air-cooling condition, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.-Accepted, (In press), 2018
35. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface Characterstics and Erosion Phenomena in WEDM of Alumina Composites, Materials and Manufacturing Processes, Taylor & Francis, Vol.-33, Issue No.16, Page Nos- 1815-1821, 2018.
36. M. A. Singh, D. K. Sarma, O. Hanzel, J. Sedlácek, P. Šajgalík, Surface Characterstics Enhancement of MWCNT alumina composites in Multi Pass WEDM process, Journal of the European Ceramic Society, Elsevier, Vol.-38(11), Page Nos -4035-4042, 2018.
37. M. A. Singh, K. Das, D. K. Sarma, Thermal Simulation of Machining of Alumina with Wire Electrical Discharge Machining Process using Assisting Electrode, Journal of Mechanical Science and Technology, Springer, Vol.-32(1), Page Nos -333-343, 2018.
38. M.A. Singh, D.K. Sarma, Parametric and Subsurface Analysis of MWCNT Alumina Composites in WEDM Process, Ceramics International, Elsevier, Vol.-44(2), Page Nos -2186-2197, 2018.
39. S. Mohapatra,R .N. Mahapatra, B. B.Biswal, ,B. Balabantray, A. K. Behera, A Deterministic Model for Remanufacturing Inventory for Reverse Supply Chain International Journal of Engineering & Technology 7, Page Nos 207-210, 2018
40. B K Balabantaray, R N Mahapatra and B B Biswal, “ Efficient Part Recognition Method in Vision Guided Robots using Orthogonal Moments, International Journal of Engineering &Technology, 7(4.41) (2018) 60-65, 2018, DOI: 10.14419/ijet.v7i4.41.24301.

Chemical & Biological Sciences


1. S. Das, P. Khanikar, Z. Hazarika, M. A. Rohman, A. Uzir, A. N. Jha, A. Singha Roy, Deciphering the Interaction of 5, 7-Dihydroxyflavone with Hen-Egg-White Lysozyme through Multispectroscopic and Molecular Dynamics Simulation Approaches, ChemistrySelect, 2018, 3, 4911-4922.
2. S. Das, S. Santra, M. A. Rohman, M. Ray, M. Jana, A. Singha Roy, An Insight into the Binding of 6-Hydroxyflavone with Hen Egg White Lysozyme: A Combined Approach of MultiSpectroscopic and Computational Studies, Journal of Biomolecular Structure and Dynamics, 2018 (Accepted Article). DOI: 10.1080/07391102.2018.1535451.
3. S. Das, N. Bora, M. A. Rohman, R. Sharma, A. N. Jha, A. Singha Roy, Molecular recognition of bio-active flavonoids quercetin and rutin by bovine hemoglobin: An overview of the binding mechanism, thermodynamics and structural aspects through multi-spectroscopic and molecular dynamics simulation studies, Physical Chemistry Chemical Physics, 2018. 20, 21668-21684.
4. D. Paul, S. Rudra, P. Rahman, S. Khatua, M. Pradhan,* P. N. Chatterjee* Synthesis and characterization of Pd-γ-Fe2 O3 nanocomposite and its application as a magnetically recyclable catalyst in ligand-free Suzuki-Miyaura reaction in water, Journal of Organometallic Chemistry, 2018, 871 (15), 96-102.
5. D. Paul, S. Khatua, P. N. Chatterjee* Iron-catalyzed tandem C-N and C–C bond cleavage in diaryl methanamines: use of electron-rich arenes as leaving group to generate triarylmethanes, ChemistrySelect, 2018, 3, 11649-11656.
6. D. Paul, P. N. Chatterjee* A facile iron-catalyzed coupling of N-activated benzyl amines with 1,3-dicarbonyl compounds through C-N bond cleavage, ChemistrySelect, 2018, 3, 12150-12154.
7. P. N. Chatterjee*, D. Paul, M. L. Sawkmie, A. K. Sinha, S. Khatua, Synthesis, characterization of active Sn(0), and its application in selective propargylation of aldehyde at room temperature in water, Canadian Journal of Chemistry, 2019, 97 (1), 29-36.
8. A. K. Paul, N. A. West, J. D. Winner, R. D. W. Bowersox, S. W. North, and W. L. Hase. Nonstatistical intermolecular energy transfer from vibrationally excited benzene in a mixed nitrogenbenzene bath. J. Chem. Phys. 149, 134101 (2018).
9. 9) H. Mahanta, D. Baishya, Sk. S. Ahamed, and A. K. Paul*. A Better Understanding of the Unimolecular Dissociation Dynamics of Weakly Bound Aromatic Compounds at High Temperature: A Study on C6H6-C6F6 and Comparison with C6H6 Dimer. J. Phys. Chem. A 123, 2517-2526 (2019).
10. N. Deka, J. Deka, GK Dutta*, Nitrogen Doped Porous Carbon Derived from Carbazole Substituted Tetraphenylethylene Based Hypercrosslinked Polymer for High Performance Supercapacitor ChemistrySelect 2018 3(29), 8483-8490.
11. J. Deka, K. Saha, T.J. Konch, RK Gogoi, S Saikia, PP Saikia, GK Dutta, K. Raidongia* . Reconstruction of Soil Components into Multifunctional Freestanding Membranes ACS Omega 2019, 4 (1), 1292-1299
12. SM Lee, HR Lee, GK Dutta, J Lee, JH Oh, C Yang*, Furan-flanked diketopyrrolopyrrole-based chalcogenophene copolymers with siloxane hybrid side chains for organic field-effect transistors Polymer Chemistry 2019 10 (22), 2854-2862
13. N. Deka, R Patidar, S Kasthuri, N Venkatramaiah, GK Dutta, Triazine based polyimide framework derived N-doped porous carbons: a study of their capacitive behaviour in aqueous acidic electrolyte Materials Chemistry Frontiers 2019 3 (4), 680-689.
14. R Thakuria, Naba K. Nath, B. K. Saha, The Nature and Applications of π–π Interactions: A Perspective, Cryst. Growth Des. 2019, 19, 523-528.
15. P. Gupta, D. P. Karothu, E. Ahmed, P. Naumov, N. K. Nath, Thermally Twistable, Photobendable, Elastically Deformable, and Self-Healable Soft Crystals, Angew. Chem. Int. Ed. 2018, 57, 8498- 8502. (Hot paper).
16. Poonam Gupta, Tamas Panda, Suryanarayana Allu, Silpisikha Borah, Anamika Baishya, Anilkumar Gunnam, Ashwini Nangia, Panče Naumov, Naba K. Nath, Crystalline Acylhydrazone Photoswitches with Multiple Mechanical Responses, Crystal Growth & Design, 2019, 19, 3039- 3044.
17. O. M. El-Kadri, A. A. Siddique, M. D. Eaton, Naba K. Nath, Synthesis and characterization of two dioxidomolybdenum(VI) complexes bearing amidinato and pyrazolato ligands and their use in thin film growth and oxygen atom transfer reactions, Polyhedron 2018, 147, 36-41.
18. S. Rudra, A. K. Nayak, S. Koley, R. Chakraborty, P. K. Maji, M. Pradhan*. Redox-Mediated Shape-transformation of Fe3O4 Nanoflake to Chemically Stable Au-Fe2O3 Composite Nanorod for High-Performance Asymmetric Solid-State Supercapacitor Device. ACS Sustainable Chemistry & Engineering, 2019, 7, 724-733.
19. S. Rudra, A. K. Nayak, R. Chakraborty, P. K. Maji and M. Pradhan*. Synthesis of Au-V2O5 composite nanowires through the shape transformation of a vanadium(III) metal complex for high-performance solid-state supercapacitors, Inorg. Chem. Front., 2018, 5, 1836-1843.

Humanities & Social Sciences


1. B. Samita Devi, P. S. Mangang, “Man’s Entrapment within the Construct of Masculinity: An Analysis of Strindberg’s The Dance of Death”, Gnosis: An International Refereed Journal of English Language and Literature, Vol.-4, Issue No.-4, 2018.
2. R. Lyngwa, P.S. Mangang, “Tendulkar’s Oppressed Dehumans: The Oppression- Dehumanization link in Sakharam Binder”, International Journal of English Language, Literature in Humanities, Vol-6, Issue 11, November 2018, ISSN-2321-7065 (UGC Approved)
3. R. Lyngwa, P.S. Mangang, “Vijay Tendulkar’s Angry Young Man: Dissecting Arun Athavale’s Character in Kanyadaan”, Spectrum: An International Journal of Humanities and Social Sciences. Vol.7, Issue 1, Jan-Jun 2019.
4. Arundhati Ashangbam, “The Emasculation of the Captain in Strindberg’s Play The Father: An Analysis from a Masculinity Studies Perspective”, Spectrum: An International Journal of Humanities and Social Sciences. Vol.7, Issue 1, Jan-Jun 2019.

Mathematics


1. Barman, B. Ghosh, Explicit impacts of harvesting in delayed predator-prey models. Chaos, Solitons & Fractals, 2019, Vol. 122, pp. 213-228.
2. 2. T.K. Kar, D. Pal, B. Ghosh, Managing yield and resilience in a harvested tri-trophic food chain model. Journal of Theoretical Biology, 2019, Vol. 469, pp.35-46.
3. 3. Ghosh, D. Pal, T. Legović, T.K. Kar, Harvesting induced stability and instability in a tri-trophic food chain. Mathematical Biosciences, Vol. 304, pp. 89-99.
4. T. Subedi and D. Roy, On a common generalization of symmetric rings and quasi duo rings, (Accepted in Algebra and Discrete Mathematics).
5. Roy and T. Subedi, On a generalization of reversible rings (Accepted in Scientific Annals of Alexandru loan Cuza univesity of Lasi(NS). Mathematics)
6. G. Nagaraju, J. Srinivas, J.V.R. Murthy, O.A. Beg, A. Kadir Second Law Analysis of Flow in a Circular Pipe with Uniform Suction and Magnetic Field Effects, Journal of Heat Transfer (ASME), 141(1) (2018) 012004-1-9.
7. J. Srinivas, S.O. Adesanya, O.A. Hammed, R.S. Lebelo, Couple Stress Fluid Flow with Variable Properties: A Second Law Analysis, Mathematical Methods in the Applied Sciences, 42 (2019) 85-98.
8. G. Gopi Krishna, Srinivas Jangili, S.R. Mishra, S. Sreenadh, Numerical Investigation of entropy generation in microporous channel with thermal radiation and buoyancy force, Indian Journal of Physics (Springer), Article in-press, 2019.

Physics


1. S. K. Srivastava, B. Samantaray, T. Bora and S. Ravi, Mangnetic and Electrical Properties of Mn Substituted (La0.85Ag0.15)CoO3 Compounds, Journal of Magnetism and Magnetic Materials, 605- 612, 474, 2019.
2. M Lyndem, R Dabrowski, A Bhattacharjee, Comparative Raman study of two laterally fluorinated LC compounds having different terminal chains, Liquid Crystals 46 (7), 1145-1155,2019
3. D Bhattacharjee, R Mishra, R Dabrowski, A Bhattacharjee Experimental and DFT generated Raman study of two bent-core monomeric liquid crystalline compounds, Liquid Crystals 46 (3), 367-375, 1, 2019.
4. R Mishra, A Bhattacharjee, D Bhattacharjee, KN Singh, PR Alapati, Temperature-dependent Raman study of pure and silver nanoparticles dispersed N-(4-n-heptyloxybenzylidene)-4’-n-butylaniline (7O. 4), Liquid Crystals 46 (3), 327-339, 2019
5. D Gupta, A Bhattacharjee, Detailed investigation of N-(4-n-pentyl-oxybenzylidene)-4 0-n-hexylaniline liquid crystal molecule, Journal of Molecular Structure 1196, 66e77, 2019
6. D Bhattacharjee, TK Devi, R Dabrowski, A Bhattacharjee, Birefringence, polarizability order parameters and DFT calculations in the nematic phase of two bent-core liquid crystals and their correlation, Journal of Molecular Liquids 272, 239-252, 1, 2018
7. K Bhuyan, A Bhattacharjee, PR Alapati, Sensing of ammonia gas by undoped and aluminumdoped tin oxide nanoparticles by Raman spectroscopy, Pramana 91 (3), 32, 2018
8. R Mishra, A Bhattacharjee, D Bhattacharjee, KN Singh, B Gogoi, Temperature-dependent vibrational spectroscopic studies of pure and gold nanoparticles dispersed 4-n-Hexyloxy-4’- cyanobiphenyls, Liquid Crystals 45 (9), 1333-1341,4, 2018.

Civil Engineering


1. C. Marthong, D Sutnga, O Kharshandi, I J Khryiemmujat and A Shangpliang (2019). Mechanical Strength of Galvanized Steel Wire Mesh (GSWM) as a Strengthening Material of Short RC Column, 4th International Conference on Mechanical and Aeronautical Engineering , IOP Conf. Series: Materials Science and Engineering , 491, doi:10.1088/1757-899X/491/1/012014.
2. J Sharailin Gidon and Smrutirekha Sahoo (2019). “Stability of slope during rainfall: A finite element approach.” Seventh Indian Young Geotechnical Engineers Conference, Chennai, India, March 15-16, 209-214.
3. D. Dutta, H. M. Kalita, Performances of Straight head and T-head groynes as river training structures, 4th International Conference on Mechanical and Aeronautical Engineering, Period -13-16 December, Place -Bangkok, Page -6, 2018.
4. Sahoo, S.,Manna, B. andSharma, K. G. (2018). “Seismic responseof a steep nailed soil slope: Shaking table test and numerical studies.”International Symposium on Geotechnics of Transportation Infrastructure (ISGTI 2018), IIT Delhi, India, April 07-08

Computer Science And Engineering


1. Singh Akhilendra Pratap, Kumar, G. Hemant, Paik, Subhendu Sekhar, Sinha Roy, Diptendu, “Storage and Analysis of Synchrophasor Data for Event Detection in Indian Power System Using Hadoop Ecosystem.” In 2018 Proceedings of International Conference on Computing, Power and Communication Technologies (GUCON 2018), (Accepted)
2. Sadanand Yadav, Vinay Kumar, S. B. Dhok, Akhilendra Pratap Singh, Gaurav Srivastava,” Performance Evaluation of Modulation Techniques for UW-FSO Communication System, International Conference on VLSI, Communication and Signal Processing, VCAS, November 29 to December 1, 2018.
3. V. Kumar, A. L. Prasanna, Dushantha Nalin K. Jayakody, A. P. Singh , Compressive Data Gathering for MI Based Clustered Non-Conventional WSNs, International Conference on Emerging Technologies of Information and Communications (ETIC 2019), Bhutan, March, 2019.
4. Mudali, G., Reddy, K. H. K., Roy, D. S., Efficient Evolutionary Approach for Virtual Machine Placement in Cloud Data Center, International Conference on Innovative Computing and Communication (ICICC-2019), TECHNICAL UNIVERSITY OF OSTRAVA, Czech Republic, March 21-22, 2019.(Accepted).
5. Behera, R. K., Reddy, K. H. K., Roy, D. S., A Novel Context Migration Model for Fog-enabled Cross-Vertical IoT Applications. International Conference on Innovative Computing and Communication (ICICC-2019), TECHNICAL UNIVERSITY OF OSTRAVA, Czech Republic, March 21-22, 2019.(Accepted)
6. B. Pradhan, N.B. Hui, D.S. Roy, Heuristic Coordination for Multi-Agent Motion Planning, International Conference on Innovative Computing and Communication (ICICC-2019), TECHNICAL UNIVERSITY OF OSTRAVA, Czech Republic, March 21-22, 2019 (Accepted).
7. Pradhan, B., Roy, D. S., & Hui, N. B. (2019). Multi-agent Navigation and Coordination Using GA-Fuzzy Approach. In Soft Computing for Problem Solving (pp. 793-805). Springer,Singapore.
8. Diptendu Sinha Roy(2019),A Study on DRX Mechanism for wireless Powered LTE-Enabled IoT device, (Accepted in ICCET 2019).
9. Pradhan, Buddhadeb, Nandi, Arijit, Sinha Roy, Diptendu, Hui, Nirmal Kumar. “A Game Theoretic Group Coordination Strategy for multi Robot Navigation” In 2018 Proceedings of the 8th International Workshop on Soft Computing Applications (SOFA 2018), (Accepted)
10. S. Shirinzadeh, K. Datta, R. Drechsler, “Logic Design using Memristors: An Emerging Technology (EmbeddedTutorial)”, 48th Intl. Symposium on Multiple-Valued Logic (ISMVL), Linz, Austria, May 2018.
11. A. Zulehner, P. M. N. Rani, K. Datta, R. Wille, I. Sengupta, “Generalizing the Concept of Scalable Reversible Circuit Synthesis for Multiple-valued Logic, 48th Intl. Symposium on Multiple-Valued Logic (ISMVL), Linz, Austria, May2018.
12. Gurung, A., & Ray, R. (2018, March). Planar Projection of Polytopes using Hough Transforms. In 2018 IEEE International Conferenceon Electronics, Computing and Communication Technologies (CONECCT) (pp. 1-7).IEEE.
13. Sutirtha Chakraborty, Shubham Singh, Surmila Thokchom, “Integrity checking using third party auditor in Cloud storage”, 2018 11th International Conference on Contemporary Computing (IC3), Jaypee Institute of Information Technology, Noida, 2-4 August 2018.
14. S. Roy, D. Kumar, A. Dandapat and P. Saha, “Discretized Sinusoidal Waveform Generators for Signal Processing Applications,” accepted in International Conference on Trends in Electronics and Informatics (ICOEI 2018), Tirunelveli, India, 11-12 May 2018.
15. P. Sahu, B. Khamari, B. Balabantaray and B. B. Biswal, “Geodesic Approach For Trajectory Planning Of Mobile Robot Manipulators”, International Conference on Recent Innovations & Developments in Mechanical Engineering (IC-RIDME2018).
16. Sadanand Yadav, Vinay Kumar, S. B. Dhok, Akhilendra Pratap Singh, Gaurav Srivastava, “Performance Evaluation of Modulation Techniques for UW-FSO Communication System, International Conference on VLSI, Communication and Signal Processing, VCAS, November 29 to December 1, 2018.
17. V. Kumar, A. L. Prasanna, Dushantha Nalin K. Jayakody, A. P. Singh , Compressive Data Gathering for MI Based Clustered Non-Conventional WSNs, International Conference on Emerging Technologies of Information and Communications (ETIC 2019), Bhutan, March, 2019.
18. B K Balabantaray, R Nayak and B B Biswal, “Image based Visual Servoing using Non-Orthogonal Moment Invariants”, International Conference on Innovative Product Design and Intelligent Manufacturing System (ICIPDIMS-19), NIT Rourkela, 17-18 June 2019.
19. H. K. Paikray, P. K Das, S. Panda, B. K. Balabantaray,”Improved shuffled frog Leaping Algorithm for Path Planning of multiple Mobile Robot”,2ND INTERNATIONAL CONFERENCE ON INNOVATIONS IN ELECTRONICS, SIGNAL PROCESSING AND COMMUNICATION (IESC) 2019.
20. Shubham Singh, Surmila Thokchom, “Public integrity auditing for shared dynamic cloud data”, Procedia Computer Science Volume 125, 2018, Pages 698-708.
21. Surmila Thokchom, Dilip Kr. Saikia, “Efficient scheme for dynamic Cloud data shared within a static group with privacy preserving auditing and traceability”, Proceedings of the 2018 International Conference on Cloud Computing and Internet of Things, Singapore, Pages 25-32
22. Ikkurthi Bhanu Prasad, Biswajit Rout, Yogita. “M-way Balanced Tree Data Aggregation Approach for Clustered Wireless Sensor Networks”. 3rd International Conference on Optical and Wireless Technologies, India, March, 2019.
23. Upasana Chutia, Jerry W Sangma, Vipin Pal, and Yogita. “Data-Driven Extraction of Quantitative Multi- Dimensional Associations of Cardiovascular Drugs and Adverse Drug Reactions”. 13th International Conference on Practical Applications of Computational Biology & Bioinformatics, Spain, June 2019.
24. Lokesh Pawar, Rohit Bajaj, Jaspreet Singh, Vipin Pal “Smart City IoT: Smart Architectural Solution for Networking, Congestion and Heterogeneity” International Conference on Intelligent Computing and Control Systems, 2019.
25. M Sarkar, J W Sangma, Yogita, V Pal “Human Behaviour Analysis: Using Clustering for Identifying Co-evolving EEG Data Streams”, Ninth International Workshop Statistical Analysis of Neuronal Data (SAND9), University of Pittsburgh, Pittsburgh, USA, May 21 - 23, 2019.

Electrical Engineering


1. R. Chakrabarty and R. Adda, “Model predictive control of DSTATCOM employing a single DC source cascaded H-bridge multilevel inverter in a weak distribution system” 20th IEEE National Power System Conference (NPSC) ,Dec. 2018.
2. R. Chakrabarty and R. Adda, “Constant Switching Frequency State Feedback Control of Cascaded H-bridge Multilevel Inverter with Reduced Switches” 8th IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Dec. 2018.
3. Ritu Raj Shrivastwa, Ahmad Hably, Sanjoy Debbarma, Seddik Bacha, “Frequency Control Using V2G and Synchronous Power Controller based HVDC Links in Presence of Wind and PV Units”, The 44th Annual Conference of the IEEE Industrial Electronics Society (IECON 2018), Oct 2018, Washington DC, United States.
4. Sanjoy Debbarma, Chhandashree Hazarika, Ksh. Milan. Singh, “Virtual Inertia Emulation from HVDC Transmission Links to Support Frequency Regulation in Presence of Fast Acting Reserve”, 2nd International Conference on Energy, Power & Environment (IEEE ICEPE 2018), June 2018, NIT Meghalaya, Shillong.
5. Bhabani Kumari Choudhury, Sanjoy Debbarma, “Managing Vehicle-to-grid Mobile Energy Network as Demand Response in Power Systems”, 2nd International Conference on Energy, Power & Environment (IEEE ICEPE 2018), June 2018, NIT Meghalaya, Shillong.
6. Siddhartha Deb Roy, Sanjoy Debbarma, “Inertia Emulation Using Battery Management System in a Low Inertia Grid with HVDC Links”, 2nd International Conference on Energy, Power & Environment (IEEE ICEPE 2018), June 2018, NIT Meghalaya, Shillong.
7. Darshan Prakash Borthakur and Supriyo Das, “Life Estimation of XLPE Cable under Electrical and Thermal Stress”, International Conference on High Voltage Engineering & Technology (ICHVET), February 2019, CPRI Hyderabad.
8. Adnan Iqbal and Supriyo Das, “Estimation of Support Vector Machine Parameters Based on Breakdown Voltage Characteristics”, IEEE International Conference on Energy, Power and Environment (ICEPE), June 2018, NIT Meghalaya.
9. Thangabalan and Supriyo Das, “The Effect of Lightning on Insulator Flashover Characteristics”, IEEE International Conference on Energy, Power and Environment (ICEPE), June 2018, NIT Meghalaya.
10. Eshan Tiwari, Vikash Kumar, and Piyush Pratap Singh, Anti-synchronisation of Vallis Chaotic Systems using Nonlinear Active Control Technique, 2nd IEEE International Conference on Energy, Power and Environment (ICEPE), NIT Meghalaya, Shillong, India, June 1-2, 2018.
11. Piyush Pratap Singh and B K Roy, Secure Communication Using NAC Based Synchronisation Between Nonidentical Chaotic Systems, 2nd IEEE International Conference on Energy, Power and Environment (ICEPE), NIT Meghalaya, Shillong, Meghalaya, India, June 1-2, 2018.
12. Manish Kumar and Piyush Pratap Singh, Chaos control of an extended four dimensional fundamental power system using sliding mode control, 5th IEEE Uttar Pradesh Section International Conference on Electrical, Electronics and Computer Engineering (UPCON), MMMUT Gorakhpur, Uttar Pradesh, India, Nov. 2-4, 2018.
13. Prakash Chandra Gupta, Atanu Banerjee and Piyush Pratap Singh, Analysis of Global Bifurcation and Chaotic Oscillation in Distributed Generation Integrated Novel Renewable Energy System, 15th IEEE India Council International Conference (INDICON), Amrita Vishwa Vidyapeetham Coimbatore, India, Dec. 16-18, 2018.
14. Hari Charan Nannam , Atanu Banerjee –“A Detailed Modeling and Comparative Analysis of Hysteresis Current Controlled Vienna Rectifier and Space Vector Pulse Width Modulated Vienna Rectifier in Mitigating the Harmonic Distortion on the Input Mains”- 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM),16th -19th December,2018, Bangkok, DOI:10.1109/IEEM.2018.8607388 pp.371-375.
15. Pratikanta Misra , Atanu Banerjee, Mousam Ghosh- “FPGA-based Real-time Performance Analysis of Buck-regulator Fed Current Source Inverter ” 8th IEEE India International Conference on Power Electronics (IICPE), 13th -15th December, 2018,MNIT Jaipur , DOI: 10.1109/IICPE.2018.8709443, pp.1-6.
16. Pratikanta Mishra , Atanu Banerjee , Hari Charan Nannam , Mousam Ghosh- “A Novel Modified Digital PWM Control Technique to Reduce Speed Ripples in BLDC Motors” 2018 IEEE 4th Southern Power Electronics Conference (SPEC) , 10-13th Deember,2018,Singapore, DOI: 10.1109/ SPEC.2018.8635993, pp.1-8.
17. Susmita Bhattacharjee, Nayanita Sikder, Ksh. Milan Singh, “Ultrasonic Vibration Measurement based on FM demodulation in PLL Technique,” 2nd IEEE International conference on Innovations in Electronics and Signal Processing and Communication (IESC-2019), March 2019 EC Dept., NIT Meghalaya, India
18. Nayanita Sikder, Susmita Bhattacharjee, Ksh. Milan Singh, “Harmonic Extraction based on mHDFT Algorithm in PLL Technique,” 2nd IEEE International conference on Innovations in Electronics and Signal Processing and Communication (IESC-2019), March 2019, EC Dept., NIT Meghalaya, India
19. Shaik Affijulla, Praveen Tripathy, “A Special Protection Scheme for Transmission Lines based on Wide Area Monitoring System,” IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON), Riga, Latvia, 12-13 Nov, 2018.
20. V. Narendra Kumar, Moushumi Patowary and Gayadhar Panda, “ Dynamic Power Management Controller to the Self-Sustained Wind-Solar DC microgrid in the Transportation Applications”, in IEEE I2CT 2018, April 7-8, Pune.
21. S. Jena, Gayadhar Panda and Rangababu P, “A Low Voltage Ride Through Scheme for three phase grid connected PV inverter with an adaptive window based MAF-PLL”, 2018 8th IEEE India International Conference on Power Electronics (IICPE), 2018.
22. M. Patowary, Gayadhar Panda, Bimal. C. Deka, “Relative Influence of Intelligent Current Controllers on Power Quality in Grid-interactive Solar Inverter System”, 2018 2nd International Conference on Power, Energy and Environment: Towards Smart Technology (ICEPE), June 2018.
23. P. Buduma, V. N. Kumar and Gayadhar Panda, “Assimilation of Wind Plant to the Utility Grid by An Improved Active and Reactive Power Control”, 2018 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), December 2018.
24. S. Murali, K. P. Panda and Gayadhar Panda, “PV-HESS fed BLDC Driven Water Pumping System with PSO-based MPP Tracking Employing Zeta Converter”, 2018 IEEE Innovative Smart Grid Technologies - Asia (ISGT Asia), May 2018.

Electronics & Communication Engineering


1. S. Das, S. Majumdar, S. Ghosh, A. Bag, S. K. Sharma and D. Biswas, “Acetone Adsorption Characteristics of Pd/AlGaN/GaN Heterostructure Grown by PAMBE: A Kinetic Interpretation at Low Temperature,” 2018 IEEE SENSORS, New Delhi, India, 2018, pp. 1-4.
2. R. Ahmed, P. Saha, “Power and Delay Comparison of 7:3 Compressor Designs Based on Different Architectures of XOR Gate” Int. Conf. on Inventive Communication and Computational Technologies. Accepted, 2019.
3. Priya Pallavi and Ch V Rama Rao, “Phase-Locked Loop (PLL) Based Phase Estimation in Single Channel Speech Enhancement,” in Interspeech 2018, Hyderabad, 2 - 6 September, 2018.
4. T. V. Mahendra, Sh. Wasmir Hussain, S. Mishray and A. Dandapat, ““Low Match-Line Voltage Swing Technique for Content Addressable Memory” (paper #1570538547), in 7th International Conference on Smart Computing & Communications (ICSCC)] on 28-30 June 2019, Curtin University Malaysia, Miri, Malaysia.
5. T. V. Mahendra, Sh. Wasmir Hussain, S. Mishray and A. Dandapat, ““Performance Analysis of N-CAM, P-CAM and TG-CAM Using 45-nm Technology (Paper ID)ICICCS-045””, in IEEE International Conference on Intelligent Computing and Control Systems [ICICCS 2019] on 15-17 May 2019, Tamilnadu, India.
6. S. Roy ; D. Kumar ; A. Dandapat ; P. Saha, “Discretized Sinusoidal Waveform Generators for Signal Processing Applications”, in IEEE 2018 2nd International Conference on Trends in Electronics and Informatics (ICOEI) on 11-12 May 2018, Tirunelveli, India.
7. Farhana Begum, Sandeep Mishra, Md. Najrul Islam and Anup Dandapat, “Analysis and Proposal of A Flash Subranging ADC Architecture”, in International Conference on Microelectronics, Computing & Communication Systems (MCCS-2018) on 12-13th May-2018, Ranchi.
8. Panda, Gayadhar, Satabdy Jena, and Peesapati Rangababu. “A Low Voltage Ride Through Scheme for three phase grid connected PV inverter with an adaptive window based MAF-PLL.” In 2018 8th IEEE India International Conference on Power Electronics (IICPE), pp. 1-6. IEEE, 2018.
9. Shashi Kumar, Pradeep Kumar Rathore, Peesapati Rangababu, “Implementation of operational amplifier for the designing of novel piezoresistive pressure sensor”, 2018 IEEE 2nd International Conference on Smart Sensors and Application (ICSSA), Kuching, Malaysia, pp. 126-129, 2018
10. Shashi Kumar, Pradeep Kumar Rathore, Peesapati Rangababu, “Sensitivity enhancement of current mirror readout circuit based piezoresistive pressure transducer using differential amplifier”, 17th IEEE Sensors conference, New Delhi, 2018, pp. 1-4, 2018.
11. Shashi Kumar, Gaddiella Diengdoh Ropmay, Pradeep Kumar Rathore and Peesapati Rangababu, “An idea of implementing CMOS operational amplifier in summer configuration for the designing of highly sensitive pressure transducer”, 2019 IEEE 2nd international conference on innovations in electronics, signal processing and communication, Shillong (Presented).
12. Diptarup Bhattacharya, Pradeep Kumar Rathore, Shubhankar Majumdar, “Non-Invasive Piezoelectric Sensor for Detection of Lung Cancer”, IEEE International Conference on Communication and Electronics Systems (ICCES 2018), COIMBATORE, pp. 1-4, 2018.

Mechanical Engineering


1. G. Bala Murali1, P. K. Sahu, B.B.V.L. Deepak., B.B. Biswal, Modified BAT Algorithm for Optimum Assembly Sequence Planning, IOP Conference Series: Materials Science and Engineering, Volume 377, conference 1.
2. B. K. Khamari, P. K. Sahu, B B Biswal, Microstructure Analysis of Arc Welded Mild Steel Plates, IOP Conference Series: Materials Science and Engineering, Volume 377, conference 1
3. Comparative Study of Two Immersed Boundary Approaches in the Lattice Boltzmann Framework, Arnab Ghosh, Sambit Majumder, Ganesh Natarajan, Dipankar Narayan Basu, 7th International Conference on Fluid Mechanics and Fluid Powers, December 10-12, 2018, IIT Bombay, Mumbai.
4. Alom, N., Kumar, N., and Saha, U. K., 2019. Analyzing the effect of shaft and end-plates of a newly developed elliptical-bladed Savonius rotor from wind tunnel tests, Paper No. OMAE2019- 95570, ASME 38th International Conference on Ocean, Offshore and Arctic Engineering, June 9-14, 2019, Glasgow, Scotland, UK.
5. Alom, N., Borah, B., and Saha, U. K., 2018. An insight into the drag and lift characteristics of modified Bach and Benesh profiles of Savonius rotor, 4th International Symposium on Hydrogen Energy, Renewable Energy and Materials (HEREM), June 13–14, Bangkok, Thailand (Also appears in Energy Procedia, Vol. 144, pp: 50-56).
6. M. Roy Choudhury and K. Debnath. Experimental Analysis of Failure Load in Single-Lap Hybrid Joint (Bonded/Bolted) of Green Composites. 40th MATADOR International Conference on Advanced Manufacturing and Design (MATADOR-2019), Hangzhou, China, 8-10th July, 2019.
7. P.K. Gupta and K. Debnath. Experimental Study on Electro Chemical Discharge Machining of Sustainable Materials. Third International Conference on Sustainable Energy and Environmental Challenges (3rd SEEC), Indian Institute of Technology Roorkee, Uttarakhand, India, 18-21st December, 2018.
8. S. Vishwakarma, K. Debnath, and B.K. Debnath. Thermal Performance Study of Helically Grooved Absorber Tubes for Parabolic Trough Solar Collector. Proceedings of the ASME 2018 Power Conference (ASME, POWER 2018), The Disney’s Contemporary Resort, Lake Buena Vista, USA, 24-28th June, 2018, pp. V001T06A009.
9. S. Roy, and B. K. Debnath, Heat transfer enhancement of sensible energy storage for low temperature application, Proceedings of the ASME 2018 Power and Energy Conference (PowerEnergy2018), Lake Buena Vista, Florida, USA, June 24-28, 2018, pp. V001T06A010.
10. S. Roy, T. Bose, and K. Debnath. Analytical and Numerical Study of Local Damage Resonance Frequencies in Fibre Metal Laminates. 2nd International Conference on Energy, Power and Environment: Towards Smart Technology (ICEPE 2018), National Institute of Technology Meghalaya, Meghalaya, India, 1-2nd June, 2018, pp. 1-5.
11. S. Roy, T. Bose. Bicoherence Analysis based Delamination Detection in Glass Fibre Reinforced Polymer Composite Plate. Conference and exhibition on Non-destructive evaluation (NDE 2018), Navi Mumbai, India, 19-21 December, 2018.
12. N. S. V. N. Hanuman, T. Bose. Acoustic non-destructive evaluation of Glass-Fibre Reinforced Plastic (GFRP) Plate. Conference and exhibition on Non-destructive evaluation (NDE 2018), Navi Mumbai, India, 19-21 December, 2018.
13. S. Roy, T. Bose, K. Debnath. Detection of Local Defect Resonance Frequencies for Defect Imaging: a Nonlinear Ultrasound Based Approach. International conference on Recenet Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, India, 8-10 November, 2018.
14. M. Vashum, S. Roy, T. Bose. Shear Behaviour of the Delaminated Glass Fiber Reinforced Composite Laminates. International conference on Recent Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, India, 8-10 November, 2018.
15. Sanjib Kr. Rajbongshi, D. K. Sarma, M. A. Singh, A brief review of white layer formation in hard machining with a case study, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Period 08-11-18 to 10-11-18, 2018, NIT Meghalaya, Shillong, India, Page -6, 2018.
16. M. A. Singh, D. K. Sarma, Sanjib Kr. Rajbongshi, O. Hanzel, P. Šajgalík, Investigation of machining capabilities of 2.5 vol. % MWCNT Al2 O3 composites in μ-EDM, International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Period 08-11-18 to 10-11- 18, 2018, NIT Meghalaya, Shillong, India, Page -6, 2018.
17. S. Kr. Rajbongshi, D. K. Sarma, Process parameters optimization using Taguchi’s orthogonal array and grey relational analysis during hard turning of AISI D2 steel in forced air-cooled condition, 4th International Conference on Mechanical and Aeronautical Engineering (ICMAE 2018), Hong Kong Society of Mechanical Engineers, Period 13-12-2018 to 16-12-2018, Bangkok, Thailand, Page -6, 2018.
18. Sushmita Deka, Ramesh Babu Pallekonda, Maneswar Rahang, Dynamic Calibration of a Three Component Accelerometer Force Balance System and Force Prediction using Deconvolution. International Conference on Recent Innovations and Developments in Mechanical Engineering, NIT Meghalaya, Shillong, India, 8-10 November, 2018.
19. Sushmita Deka, Ramesh Babu Pallekonda, Maneswar Rahang, Dynamic Calibration of a stress wave force balance under various supports and loads using finite element analysis. International Symposium on Shock Waves (ISSW 32), conducted by NUS at Engineering Avenue, NUS Singapore, During 15-19th July 2019.
20. H. Barman, R.S. Das. Simultaneous Heat and Mass Transfer Analysis in Falling Film Absorber. International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Nov 8-10, 2018.
21. P. J. Bezbaruah, R.S. Das, B.K. Sarkar. 2D CFD Analysis of Solar Air Collector with Miller Teeth Shaped Roughness International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Nov 8-10, 2018.
22. Rashed Mustafa Mazarbhuiya and Maneswar Rahang, Parametric Optimization in Photochemical Machining of Aluminium Using Taguchi Method 4th International Conference on Mechanical and Aeronautical Engineering IOP Conf. Series: Materials Science and Engineering 491 (2019) 012033 doi:10.1088/1757-899X/491/1/012033
23. Rashed Mustafa Mazarbhuiya and Maneswar Rahang, Multi-Objective Optimization of Photochemical Machining parameters using Taguchi-Grey Relational Analysis, International Conference on Emerging Trends in Mechanical Engineering (ICETME-2018), Anantapur, India.
24. Rashed Mustafa Mazarbhuiya and Maneswar Rahang, Parametric Study of Photochemical Machining of Aluminium using Taguchi Approach International Conference on Recent Innovations and Developments in Mechanical Engineering (IC-RIDME 2018), Nov 8-10, 2018.
25. S. Mohapatra,R .N. Mahapatra, B. B.Biswal, ,B. Balabantray, A. K. Behera, A Deterministic Model for Remanufacturing Inventory for Reverse Supply Chain ICECNS, 19-21 October 2018
26. B K Balabantaray, R N Mahapatra and B B Biswal, “ Efficient Part Recognition Method in Vision Guided Robots using Orthogonal Moments, International Journal of Engineering &Technology, ICECNS, 19-21 October 2018.

Humanities & Social Sciences


1. Arundhati Ashangbam, “Deconstructing Utopia: A Reflection in Primo Levi’s Works”, 18th MELOW International Conference on Sunny Pleasure Domes and Caves of Ice: Utopias and Dystopias in World Literature to be held at Jamia Milia Islamia, Delhi, 15-17 March 2019

Physics


1. Eliyash Ahmed, Ranit Roy, R Rajaraman, and K Senthilkumar, Anomalous multiphonon features of hyper-Raman in ZnO NPs, IOP Conference Series Materials Science and Engineering, Accepted.
2. Prahlad K. Baruah, Arpita Nath, Ishani Chakrabartty, Anuma Singh, Archana Das, Latha Rangan, Ashwini K. Sharma and Alika Khare, Surface Enhanced Raman Scattering and Antibacterial Capability of Pulsed Laser Ablated Metal/Metal Oxide Nanoparticles, Advances in Science and Technology, 140-144, 1, 2019.

Civil Engineering


1. Hopeful Syiemiong and Comingstarful Marthong (2020). “Effect of mortar grade on the uniaxial compression strength of low-strength hollow concrete block masonry prisms" Material Today: Proceedings, 28 (2020) 842–845.
2. KH Lepcha, AL Marbaniang, ML Patton, A Khyriemmujat, Behaviour and Design of Lean Duplex Stainless Steel (LDSS) Beams with Web Openings Under Pure Bending, International Journal of Steel Structures, Springer, Vol.-17, 1052–1068, 20.
3. K. Bora, H. M. Kalita, A semi-coupled model for morphological flow simulation in river bend, Journal of Applied Fluid Mechanics, Vol.- 13, Issue No.- 5, Page No1611-1622, 2020
4. H. M. Kalita, A simple and efficient numerical model for simulatingone dimensional dam break flows, International Journal of Hydrology Science and Technology, Vol.- 10, Issue No.- 1, Page No- 1-16, 2020.
5. Kaushik, S and Siddagangaiah, A.K.,“Characterization of cement grouted bituminous mixes using marginal aggregates”, Road Materials and Pavement Design, Taylor & Francis (Under review).
6. Gidon, J.S., Sahoo, S. Rainfall-Induced Slope Failures and Use of Bamboo as a Remedial Measure: A Review. Indian Geotech J (2020). https://doi.org/10.1007/s40098-020-00409-3
7. S Das, S Dutta, C Putcha, S Majumdar, D Adak, A Data-Driven Physics-Informed Method for Prognosis of Infrastructure Systems: Theory and Application to Crack Prediction, ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 2020, 6 (2), 04020013 – 04020019
8. Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and FRP wrapping”, Structural Engineering and Mechanics, Techno Press. 72(6), pp. 723-736.
9. Comingstarful Marthong (2019). "Behavior of repaired RAC beam-column joints using steel welded wire mesh jacketed with cement mortar” Advance Concrete Construction, Techno Press, 8(2), pp. 91-100.
10. Hopeful Syiemiong, Comingstarful Marthong (2019). "Effect of moisture on the compressive strength of low-strength hollow concrete blocks". Computer and Concrete, Techno Press. 23(4), pp. 267-272. d. Comingstarful Marthong (2019). “Rehabilitation of exterior RC beam-column connections using epoxy resin injection and galvanized steel wire mesh”, Earthquake and Structures, Techno Press. 16 (3), pp. 253-263.
11. K. Bora, H. M. Kalita, Determination of best groyne combination for mitigating bank erosion, Journal of Hydroinformatics, Vol.- 21, Issue No.- 5, Page No- 875-892, 2019
12. H Song, J Wang, A Garg, X Lin, Q Zheng, S Sharma(2019) Potential of Novel Biochars Produced from Invasive Aquatic Species Outside Food Chain in Removing Ammonium Nitrogen: Comparison with Conventional Biochars and Clinoptilolite, Sustainability 11 (24), 7136- 7156.
13. D. Podder, O.P. Gupta, S. Das, N.R. Mandal, Experimental and numerical investigation of effect of welding sequence on distortion of stiffened panels, Welding in the World, 3rd June, 2019,https://doi.org/10.1007/s40194-019-00747-8
14. H.S. Chouhan, P. Kalla, R. Nagar, P.K. Gautam, Gainful utilization of dimensional limestone waste as fine aggregate in cement mortar mixes, Constr. Build. Mater. 221 (2019) 363–374. https://doi.org/10.1016/j.conbuildmat.2019.06.097.
15. H. Singh Chouhan, P. Kalla, R. Nagar, P. Kumar Gautam, Influence of dimensional stone waste on mechanical and durability properties of mortar: A review, Constr. Build. Mater. 227 (2019) 116662. https://doi.org/10.1016/j.conbuildmat.2019.08.043.
16. Sahoo S., Manna B., Sharma K.G. (2019) Seismic Response of a Steep Nailed Soil Slope: Shaking Table Test and Numerical Studies. In: Sundaram R., Shahu J., Havanagi V. (eds) Geotechnics for Transportation Infrastructure. Lecture Notes in Civil Engineering, vol 28. Springer, Singapore. (DOI: https://doi.org/10.1007/978- 981-13-6701-4_39),(Print ISBN978-981-13-6700-7, Online ISBN978-981-13-6701- 4)
17. Dibyendu Adak, Saroj Mandal, Strength and Durability Performance of Fly Ash– Based Process-Modified Geopolymer Concrete. Journal of Materials in Civil Engineering, © ASCE, 2019, 31 (9), 04019174-1 to 04019174-8.
18. Moumita Maiti, Manas Sarkar, Shilang Xu, Sukhen Das, Dibyendu Adak, Soumen Maiti, Application of silica nanoparticles to develop faujasite nanocomposite for heavy metal and carcinogenic dye degradation, Environmental Progress & Sustainable Energy, 38 (S1), S15-S23.

Computer Science And Engineering


1. Mallikarjuna, B., Pathirikkat, G., Roy, D. S., & Maddikara, J. B. R. (2019). A Real-Time Synchronized Harmonic Phasor Measurements-Based Fault Location Method for Transmission Lines. Journal of Control, Automation and Electrical Systems, 30(6), 1082-1093.
2. Rajappa, M., Krithivasan, K., & Roy, D. S. (2019). Helly hypergraph based matching framework using deterministic sampling techniques for spatially improved point feature based image matching. Multimedia Tools and Applications, 78(11), 14657-14681.
3. Behera, R. K., Reddy, K. H. K., & Sinha Roy, D. (2019). Modeling and assessing reliability of service-oriented internet of things. International Journal of Computers and Applications (Inderscience), 41(3), 195-206.
4. Pradhan, B., Vijayakumar, V., Hui, N. B., & Sinha Roy, D. (2019). Intelligent navigation of multiple coordinated robots. Journal of Intelligent & Fuzzy Systems, 36(5), 4413-4423.
5. Nalluri, M. S. R., Kannan, K., Gao, X. Z., & Roy, D. S. (2019). An efficient hybrid meta-heuristic approach for cell formation problem. Soft Computing, 23(19), 9189-9213.
6. Reddy, K. H. K., Pandey, V., & Roy, D. S. (2019). A novel entropy-based dynamic data placement strategy for data intensive applications in Hadoop clusters. International Journal of Big Data Intelligence, 6(1), 20-37.
7. Chang, C. Y., Lin, C. C., Shang, C., Chang, I. H., & Roy, D. S. (2019). DBDC: A Distributed Bus-Based Data Collection Mechanism for Maximizing Throughput and Lifetime in WSNs. IEEE Access, 7, 160506-160522.
8. Nalluri, M. R., Kannan, K., Gao, X. Z., & Roy, D. S. (2019). Multi objective hybrid monarch butterfly optimization for imbalanced disease classification problem. International Journal of Machine Learning and Cybernetics, 1-29.
9. Pradhan, B., Nandi, A., Hui, N. B., Roy, D. S., & Rodrigues, J. (2019). A Novel Hybrid Neural Network Based Multi Robot Path Planning with Motion Coordination. IEEE Transactions on Vehicular Technology.
10. Nalluri, M. R., Kannan, K., Gao, X. Z., & Roy, D. S. (2020). Multi-Objective Optimization of Feature Selection Using Hybrid Cat Swarm Optimization. Science China Technological Sciences, Springer (Accepted).
11. Chang, I. H., Keh, H. C., Dande, B., & Roy, D. S. (2020). Smart Hat: Design and Implementation of a Wearable Learning Device for Kids Using AI and IoTs Techniques. Journal of Internet Technology, 21(2), 593-604.
12. Chang, C. Y., Chen, S. Y., Chang, I. H., Yu, G. J., & Roy, D. S. (2020). Multi-Rate Data Collection Using Mobile Sink in Wireless Sensor Networks. IEEE Sensors Journal. (Accepted)
13. Liao, W. H., Dande, B., Chang, C. Y., & Roy, D. S. (2020). MMQT: Maximizing the Monitoring Quality for Targets Based on Probabilistic Sensing Model in Rechargeable Wireless Sensor Networks. IEEE Access, 8, 77073-77088. (Accepted).
14. Wen, W., Shang, C., Chang, C. Y., & Roy, D. S. (2020). DEDC: Joint Density-Aware and Energy-Limited Path Construction for Data Collection Using Mobile Sink in WSNs. IEEE Access, 8, 78942-78955. (Accepted)
15. Shang, C., Chang, C. Y., Liu, J., Zhao, S., & Roy, D. S. (2020). FIID: Feature-Based Implicit Irregularity Detection Using Unsupervised Learning from IoT Data for Homecare of Elderly. IEEE Internet of Things Journal. (Accepted)
16. Dong, Zaixiu, Cuijuan Shang, Chih-Yung Chang, and Diptendu Sinha Roy. "Barrier Coverage Mechanism Using Adaptive Sensing Range for Renewable WSNs." IEEE Access 8 (2020): 86065-86080.
17. M S Rao, Kannan K, X Z Gao, Swaminathan V, D S Roy, (2020) “Parameter Evolution of the Classifiers for Disease Diagnosis with Offline Data-Driven Hybrid Systems” Intelligent Data Analysis (IOS Press) (Accepted).
18. N. Goel, A. Singh, Yogita, “Integrative Analysis of Multi-Genomic Data for Kidney Renal Cell Carcinoma” Interdisciplinary Sciences: Computational Life Sciences 2019.
19. Upasana, J. Sangma, V. Pal, Yogita "Data-Driven Extraction of Quantitative Multi- dimensional Associations of Cardiovascular Drugs and Adverse Drug Reactions." In International Conference on Practical Applications of Computational Biology & Bioinformatics, pp. 70-77. Springer, Cham, 2019.
20. Yogita, J W Sangma, S R Ngamwal, V Pal, “Clustering-Based Hybrid Approach for Identifying Quantitative Multidimensional Associations Between Patient Attributes, Drugs and Adverse Drug Reactions”, Interdisciplinary Sciences: Computational Life Sciences, 2020.
21. Vipin Pal, Anju Yadav, Yogita, “DDC protocol to protract network lifetime of wireless sensor networks” International Journal of Computers and Applications, 2020.
22. K. Hemant Kumar Reddy, Ranjith Kumar Behera, Alok Chakrabarty, Diptedu Sinha Roy, (2020), “A Service Delay Minimization Scheme for QoS Constrained, Context Aware Unified IoT Applications”, IEEE Internet of Things Journal (Accepted).
23. Vinay Kumar, Akshay Kulkarni, Sadanand Yadav, Akhilendra Pratap, Sanjay B dhok,” Modelling of Superconductor Enabled Magnetic Induction Transmitter and Relay Coil for Non-Conventional Media Communication” Wireless Personal Communications, Springer, Wireless Personal Communications,111:2577–2603, December 2019.
24. Surmila Thokchom and Dilip Kr. Saikia, “Privacy preserving integrity checking of shared dynamic cloud data with user revocation”, Journal of Information Security and Applications, Volume 50, February 2020.

Electrical Engineering


1. Siddhartha Deb Roy, Sanjoy Debbarma, Detection and Mitigation of Cyber-Attacks on AGC Systems of Low Inertia Power Grid, IEEE Systems Journal, Vol. 14, No. 2, pp. 2023-2031, June 2020
2. P. P. Singh and B. K. Roy, Microscopic chaos control of chemical reactor system using nonlinear active plus proportional integral sliding mode control technique, Eur. Phys. J. Special Topics, vol. 228, pp. 169-184, May 2019.
3. M. Kumar and P. P. Singh, Chaos control of a four-dimensional fundamental power system using pole placement based proportional integral sliding mode control, Int. J. of Automation and Control, vol. 13, no. 6, pp. 679-697, June 2019. DOI: 10.1504/IJAAC.2019.102671
4. P. P. Singh and B. K. Roy, Memristor-based novel complex-valued chaotic system and its projective synchronisation using nonlinear active control technique, Eur. Phys. J. Special Topics, vol. 228, pp. 2197-2214, October 2019.
5. P. P. Singh and B. K. Roy, Inter network synchronisation of complex dynamical networks by using smooth proportional integral SMC technique, Eur. Phys. J. Special Topics, vol. 229, pp. 861-876, January 2020.
6. P. P. Singh and B. K. Roy, A novel chaotic system without equilibria, with parachute and thumb shapes of Poincare map and its projective synchronisation, Eur. Phys. J. Special Topics, vol. 229, pp. 1265-1278, March 2020.
7. Abhisekh Anand and Shaik Affijulla, Hilbert-Huang transform based fault identification and classification technique for AC power transmission line protection, International Transactions on Electrical Energy Systems, In Press, pp. 1-16, June, 2020
8. Pratikanta Mishra, Atanu Banerjee, Mousam Ghosh-“FPGA Based Real-Time Implementation of Quadral-Duty Digital PWM Controlled Permanent Magnet BLDC Drive”IEEE/ASME Transactions on Mechatronics, Vol. 25, issue 3, DOI:10.1109/TMECH.2020.2977859, March,2020, pp 1456-1467.
9. ChiranjitSain, Atanu Banerjee, P K Biswas “Performance Optimization for Closed Loop Control Strategies towards Simplified Model of a PMSM Drive by Comparing with Different Classical and Fuzzy Intelligent Controller” International Journal of Automation and Control, Inderscience, Vol 14, issue 4, DOI: 10.1504/IJAAC.2020.10020855. March,2019, pp 469-493.
10. Narendra Babu. P, R. Peesapati and G. Panda, "An Adaptive Differentiation Frequency based Advanced Reference Current Generator in Grid-tied PV Applications," in IEEE Journal of Emerging and Selected Topics in Power Electronics, doi: 10.1109/JESTPE.2019.2933140.
11. V. N. Kumar, Narendra Babu. P, R. Kiranmayi, P. Siano and G. Panda, "Improved Power Quality in a Solar PV Plant Integrated Utility Grid by Employing a Novel Adaptive Current Regulator," in IEEE Systems Journal, doi: 10.1109/JSYST.2019.2958819.
12. Narendra Babu. P, J. M. Guerrero, P. Siano, R. Peesapati and G. Panda, "An Improved Adaptive Control Strategy in Grid-Tied PV System With Active Power Filter for Power Quality Enhancement," in IEEE Systems Journal, doi: 10.1109/JSYST.2020.2985164.
13. P. R. Bana, K. P. Panda, S. Padmanaban, L. Mihet-Popa, G. Panda and J. Wu, "Closed-Loop Control and Performance Evaluation of Reduced Part Count Multilevel Inverter Interfacing Grid-Connected PV System," in IEEE Access, vol. 8, pp. 75691- 75701, 2020, doi: 10.1109/ACCESS.2020.2987620.
14. P. Panda, P. R. Bana and G. Panda, "A Switched-Capacitor Self-Balanced High-Gain Multilevel Inverter Employing a Single DC Source," in IEEE Transactions on Circuits and Systems II: Express Briefs, doi: 10.1109/TCSII.2020.2975299.
15. K. P. Panda, P. R. Bana and G. Panda, "FPA Optimized Selective Harmonic Elimination in Symmetric–Asymmetric Reduced Switch Cascaded Multilevel Inverter," in IEEE Transactions on Industry Applications, vol. 56, no. 3, pp. 2862- 2870, May-June 2020, doi: 10.1109/TIA.2020.2981601.
16. P. R. Bana, K. P. Panda and G. Panda, "Power Quality Performance Evaluation of Multilevel Inverter With Reduced Switching Devices and Minimum Standing Voltage," in IEEE Transactions on Industrial Informatics, vol. 16, no. 8, pp. 5009- 5022, Aug. 2020, doi: 10.1109/TII.2019.2953071.
17. P. Garanayak, R. T. Naayagi and G. Panda, "A High-Speed Master-Slave ADALINE for Accurate Power System Harmonic and Inter-Harmonic Estimation," in IEEE Access, vol. 8, pp. 51918-51932, 2020, doi: 10.1109/ACCESS.2020.2980115.
18. P. Buduma, S. J. Pinto and G. Panda, "Loss of Utility Detection and Seamless Operation of Distributed Generation System," in IEEE Transactions on Industry Applications, vol. 56, no. 3, pp. 3149-3158, May-June 2020, doi: 10.1109/TIA.2020.2976800.
19. Prince, SK, Panda, KP, Panda, G. Kalman filter variant intelligent control for power quality improvement in photovoltaic active power filter system. Int. Trans. Electr. Energ. Syst. 2020; 30:e12239. https://doi.org/10.1002/2050-7038.12239.
20. Bana, PR, Panda, KP, Panda, G. Performance evaluation of a reduced components count single-phase asymmetric multilevel inverter with low standing voltage. Int. Trans. Electr. Energ. Syst. 2020;e12430. https://doi.org/10.1002/2050-7038.12430.
21. P. R. Bana, K. P. Panda, R. T. Naayagi, P. Siano and G. Panda, "Recently Developed Reduced Switch Multilevel Inverter for Renewable Energy Integration and Drives Application: Topologies, Comprehensive Analysis and Comparative Evaluation," in IEEE Access, vol. 7, pp. 54888-54909, 2019, doi: 10.1109/ACCESS.2019.2913447.
22. K. P. Panda, S. S. Lee and G. Panda, "Reduced Switch Cascaded Multilevel Inverter With New Selective Harmonic Elimination Control for Standalone Renewable Energy System," in IEEE Transactions on Industry Applications, vol. 55, no. 6, pp. 7561-7574, Nov.-Dec. 2019, doi: 10.1109/TIA.2019.2904923.
23. M. Patowary, G. Panda and B. C. Deka, "Reliability Modeling of Microgrid System Using Hybrid Methods in Hot Standby Mode," in IEEE Systems Journal, vol. 13, no. 3, pp. 3111-3119, Sept. 2019, doi: 10.1109/JSYST.2019.2925453.
24. Swarnankur Ghosh, Mousam Ghosh and Supriyo Das, “Effect of Multiple Semiconducting Screens on Line Parameters and Wave Properties of Underground Cable”, IEEE Access, Vol. 7, pp. 169371 – 169384, 2019.
25. Swarnankur Ghosh and Supriyo Das, “Effect of Parameteric Variations of Semiconductor Screen on Line Parameters and Wave Properties of Underground Cable”, International Journal of Recent Technology and Engineering, Vol. 8, Issue – 4, pp. 5279 – 5287, November 2019.

Electronics & Communication Engineering


1. T. V. Mahendra; S. W. Hussain;S. Mishra ; A. Dandapat, "A Novel Low-Power Matchline Evaluation Technique for Content Addressable Memory (CAM)" in the Special Issue On Advanced Networking And Communication Solutions For Wireless Mobile Networks, Journal of Information Science and Engineering, Vol. 36, no-5, Mar 2020.
2. T. V. Mahendra; S. W. Hussain;S. Mishra ; A. Dandapat, "Energy-Efficient PrechargeFree Ternary Content Addressable Memory (TCAM) for High Search Rate Applications" in the IEEE Transactions on Circuits and Systems I: Regular Papers, DOI:10.1109/TCSI.2020.2978295, Feb 2020.
3. S. Mishra, T. V. Mahendra, S. W. Hussain and A. Dandapat, "The analogy of matchline sensing techniques for content addressable memory (CAM)," in IET Computers & Digital Techniques, vol. 14, no. 3, pp. 87-96, 5 2020, doi: 10.1049/ietcdt.2019.0178.,2020.
4. Farhana Begum, S. Mishra ; A. Dandapat,, “Low Power 10-Bit Flash ADC with Divide and Collate Sub ranging Conversion Scheme”, Transactions on Computer Science & Engineering and Electrical Engineering, Scientiairanica, DOI: 10.24200/SCI.2019.5162.1129, Nov,2019.
5. T. V. Mahendra, S. W. Hussain, S. Mishra, A. Dandapat “Low Discharge Precharge Free Matchline Structure for Energy-Efficient Search using CAM” Integration the VLSI Journal, Elsevier 69, 31-39, Nov 2019.
6. Anup Dandapat, “Methodologies for CAM and ADC design”, CSI Transactions on ICT, Springer, DOI https://link.springer.com/article/10.1007%2Fs40012-019-00250-x. June 2019.
7. Farhana Begum, S. Mishra ; Najrul Islam ; A. Dandapat,, “A 10-bit 2.33 fJ/conv. SARADC with High Speed Capacitive DAC Switching using a Novel Effective Asynchronous Control Circuitry”, Analog Integrated Circuits and Signal Processing, Springer, https://doi.org/10.1007/s10470-019-01450-w , Apr 2019.
8. Dutta, A., Ashishkumar, G. & Rao, C.V.R. Designing of Gabor filters for spectrotemporal feature extraction to improve the performance of ASR system. Int J Speech Technol 22, 1085–1097 Nov,2019.
9. Dutta, A., Ashishkumar, G. & Ch V Rama Rao. Performance analysis of ASR system in hybrid DNN-HMM framework using a PWL euclidean activation function. Frontiers of Computer Science, Accepted, 2020.
10. S. Baldev, K. K. Anumandla and R. Peesapati, "Scalable Wavefront Parallel Streaming Deblocking Filter Hardware for HEVC Decoder," in IEEE Transactions on Consumer Electronics, vol. 66, no. 1, pp. 41-50, Feb. 2020.
11. P, NarenB., R. Peesapati, G. Panda and G. Panda, "An Adaptive Differentiation Frequency-based Advanced Reference Current Generator in Grid-tied PV Applications," in IEEE Journal of Emerging and Selected Topics in Power Electronics. doi: 10.1109/JESTPE.2019.293314, Aug 2019.
12. P, Naren B, B, CB, Peesapati, R B, Panda, Gayadhar. “An optimal current control scheme in the grid-tied hybrid energy system with active power filters for harmonic mitigation”. International Trans Electric Energy Sys,. 30(3), doi:10.1002/2050-7038.12183, Dec 2019
13. Ahmed, R. U., Saha, P. “Modeling of Short P-Channel Symmetric Double-Gate MOSFET for Low Power Circuit Simulation”, PeriodicaPolytechnica Electrical Engineering and Computer Science, 64(1), pp. 106-114, Dec,2020
14. S.D. Thabah, P. Saha, “New Design Approaches of Reversible BCD Encoder using Peres and Feynman Gates”, ICT Express Elsevier, 6 (1), Mar, 2020
15. R. U. Ahmed, E. A. Vijaykumar and P. Saha Single-Stage Operational Transconductance Amplifier Design in UTBSOI Technology Based on gm/Id Methodology Electronics Journal 23(2) 52-59, 2019.
16. Kumar, S., Ropmay, G., Rathore, P., Rangababu, P. and Akhtar, J. "Fabrication and testing of PMOS current mirror-integrated MEMS pressure transducer", Sensor Review, Emerald, doi:10.1002/2050-7038.12183, Nov,2019.
17. D. S. Saini, A. Ghosh, S.Tripathy, A. Kumar, S.K Sharma, N. Kumar, S. Majumdar, D. Bhattacharya A Promising Proton Conducting Electrolyte BaZr 1-x Ho x O 3-δ (0.05≤ x≤ 0.20) Ceramics for Intermediate Temperature Solid Oxide Fuel Cells Nature Scientific Report 10(1), 1-12, 2020
18. S.Das, S. Dutta, C. Putcha, S. Majumdar, D. Adak A data-driven physics informed method for prognosis of infrastructure systems: Theory and application to crack prediction ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A : Civil Engineering (American Society of Civil Engineers (ASCE)) 6(2), 4020013, 2020.
19. Devi, S.S., Singh, N.H. and Laskar, R.H., 2020. Fuzzy C-Means Clustering with Histogram based Cluster Selection for Skin Lesion Segmentation using NonDermoscopic Images. International Journal of Interactive Multimedia & Artificial Intelligence, 6(1), 2020

Mechanical Engineering


1. S Datta, BB Biswal, Experimental studies on electro-discharge machining of Inconel 825 super alloy using cryogenically treated tool/workpiece, Measurement 145, 611- 630
2. A Das, O Pradhan, SK Patel, SR Das, BB Biswal, Performance appraisal of various nanofluids during hard machining of AISI 4340 steel, Journal of Manufacturing Processes 46, 248-270
3. S Panda, D Mishra, BB Biswal, An approach for design optimization of 3R manipulator using Adaptive Cuckoo Search algorithm, Mechanics Based Design of Structures and Machines, 1-26
4. A Rout, D Bbvl, BB Biswal, Optimal trajectory generation of an industrial welding robot with kinematic and dynamic constraints, Industrial Robot: the international journal of robotics research and application
5. A Rout, B Deepak, BB Biswal, GB Mahanta, Optimal trajectory planning of industrial robot for improving positional accuracy, Industrial Robot: the international journal of robotics research and application
6. A Das, SK Patel, BB Biswal, N Sahoo, A Pradhan, Performance evaluation of various cutting fluids using MQL technique in hard turning of AISI 4340 alloy steel, Measurement 150, 107079
7. OP Sahu, BB Biswal, Sensor Integrated Robotic Hand for Industrial Application, International Journal of Mechanical Engineering and Robotics Research 9 (1 …
8. A Das, SR Das, SK Patel, BB Biswal, Experimental investigation of various machining attributes and cost estimation during machining of hardened AISI 4340 steel with untreated and cryo treated cermet inserts, Mechanics & Industry 21 (1), 110
9. A Rout, GB Mahanta, D Bbvl, BB Biswal, Kinematic and Dynamic Optimal Trajectory Planning of Industrial Robot Using Improved Multi-objective Ant Lion Optimizer, Journal of The Institution of Engineers (India): Series C, 1-11
10. BM Gunji, B Deepak, BB Biswal, Effect of Considering Secondary Parts as Primary Parts for Robotic Assembly Using Stability Graph, Arabian Journal for Science and Engineering 45 (2), 743-764
11. GB Mahanta, A Rout, DBB V. L, BB Biswal, An improved multi-objective antlion optimization algorithm for the optimal design of the robotic gripper, Journal of Experimental & Theoretical Artificial Intelligence 32 (2), 309-338
12. A Das, SR Das, SK Patel, BB Biswal, Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel, Machining Science and Technology 24 (2), 291-320
13. A Rout, D Bbvl, BB Biswal, GB Mahanta, A fuzzy-regression-PSO based hybrid method for selecting welding conditions in robotic gas metal arc welding, Assembly Automation.
14. S. Mohapatra, A. K. Behera, R. Mahapatra, H. Das, A deterministic inventory model in reverse supply chain,Journal of Modelling in Management,15,318-338,2019
15. S. Mohapatra, A. K. Behera, R. Mahapatra, H. Das, M. Pradhan, A deterministic inventory model of aluminium refreshment cans in reverse supply chain, International journal of services and operations management, (Accepted May 2019).
16. P. Venkaiah & B. K. Sarkar, Hydraulically actuated horizontal axis wind turbine pitch control by model free adaptive controller, Renewable Energy, 147, 55-68, 2020.
17. A. Ranjan, S. S. Yadav, K. Das, Thermal and flow analysis of split drop shaped pin fins for improved heat transfer rate, Journal of Institution of Engineers (India) Series C, 101, 375–382(2020)
18. U. Kashyap, K. Das, B. K. Debnath, Numerical and experimental study of effect of secondary surfaces fixed over a rectangular vortex generator, Journal of Thermal Sciences and Engineering Applications: ASME, 061003-1-12 (11) 2019.
19. U. Kashyap, K. Das, B.K. Debnath, U. Kashyap, S.K. Saha, Effect of Secondary Surface on Rectangular Vortex Generator: Numerical and Experimental Study, Journal of Thermal Science and Engineering Applications: ASME, https://doi.org/10.1115/1.4047008, 2020
20. Sanjib Kr. Rajbongshi, Deba Kumar Sarma, A comparative study in prediction of surface roughness & flank wear using artificial neural network & response surface methodology method during hard turning in dry and forced air-cooling condition, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol. 21, Nos. 5/6, Page Nos.- 390-436, 2019
21. Hrishikesh Dutta, Kishore Debnath, Deba Kumar Sarma, A Study of Material Removal and Surface Characteristics in Micro-Electrical Discharge Machining of Carbon Fibre Reinforced Plastics, Polymer Composite, Willey, Vol.40, No.10, Page Nos. 4033-4041, 2019
22. Sanjib Kr. Rajbongshi, Deba Kumar Sarma, Performance parameters studies in machining of AISI D2 steel with dot-textured, groove-textured & non-textured cutting tool at the flank face, International Journal of Refractory Metals and Hard Materials, Vol.83, Page Nos-1-16, September 2019
23. D. K. Sarma, S. Kr. Rajbongshi, A study in turning of AISI D2 steel with Textured and Non-textured coated carbide tool at the flank face, Materials Today: Proceedings, Elsevier, Vol. 28, Page nos. 574-581, 2020
24. Deba Kumar Sarma, Meinam Annebushan Singh, Machining of thin sections using multi-pass Wire Electrical Discharge Machining process, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, Vol.22, No.1, Page Nos. 62-78, 2020
25. S. Roy, B. Das, A. Biswas, B.K. Debnath, Energy and exergy analysis of a concretebased thermal energy storage system. Journal of The Institution of Engineers (India): Series C, 2020, Page Nos.1-13, https://doi.org/10.1007/s40032-020-00564-9.
26. H. Dutta, K. Debnath, D.K. Sarma, Improving the Performance of μED-Milling using Assisting Electrode for Fabricating Micro-Channels in CFRP Composites, Materials Today: Proceedings, Elsevier, Vol. 28, Page nos. 755-760, 2020
27. S. Vishwakarma, S. Roy, B. Das, and B. K. Debnath. Performance analysis of internally helically v-grooved absorber tubes using nanofluid. Thermal Science and Engineering Progress, 2020, Vol. 18 (1), Page Nos. 100538 (1-10), DOI: 10.1016/j.tsep.2020.100538.
28. A.C. Chandekar, B. K. Debnath. Effect of intake manifold design on the mixing of air and bio-CNG in a port-injected dual fuel diesel engine. Journal of Thermal Analysis and Calorimetry, 2020, Page Nos. 1-15. DOI: 10.1007/s10973-020-09591-1.
29. U. Kashyap, K. Das, B. K. Debnath, U. Kashyap, S. K. Saha. Numerical study on effect of secondary surface on rectangular vortex generator. Journal of Thermal Science and Engineering Applications. 2020, Page Nos. 1-33. DOI: https://doi.org/10.1115/1.4047008
30. Khelkar AB, Debnath BK, & Debnath K (2020). Use of sinusoidal surface profile in the absorber tube of a parabolic trough solar collector to enhance its thermal performance. Journal of Thermal Analysis and Calorimetry, DOI: 10.1007/s10973- 020-09929-9.
31. Mazarbhuiya, R.M., Rahang, M. ‘Reverse EDM Process for Pattern Generation using Powder Metallurgical Green Compact Tool’, Materials and Manufacturing Process. (Accepted).
32. S. Deka, P.R. Babu and M. Rahang, 2020. A new method for force prediction in an accelerometer force balance system using support vector regression. Transactions of the Institute of Measurement and Control, 42(4), pp.880-889.
33. M. Rahang and P.K. Patowari, SELECTIVE AREA DEPOSITION FOR PATTERN GENERATION IN EDM USING MASKING TECHNIQUE, Surface Review and Letters, 1950218, 2020, DOI: 10.1142/S0218625X19502184
34. Rashed Mustafa Mazarbhuiya, Hrishikesh Dutta, Kishore Debnath and Maneswar Rahang, Surface modification of CFRP composite using reverse-EDM method, Surfaces and Interfaces 18, 2020, 100457.
35. M. Rahang and P.K. Patowari, Pattern generation by selective area deposition of material in EDM, Materials and Manufacturing Processes, 34(16), 2019, 1847-1854
36. S. Das, B.K. Debnath, R.S. Das, A. Stagni, T. Faravelli. Numerical investigation of a porous media combustor in a small-scale diesel engine. Energy 186, 1-15, 2019.
37. P.J. Bezbaruah, R.S. Das, B.K. Sarkar. Solar air heater with finned absorber plate and helical flow path: A CFD analysis. Applied Solar Energy 56(1), 35-41, 2020.
38. P.J. Bezbaruah, R.S. Das, B.K. Sarkar. Thermal and fluid flow analysis of miller teeth shaped ribbed solar air heater-A CFD approach, Journal of Scientific and Industrial Research 78, 694-698, 2019.
39. P.J. Bezbaruah, R.S. Das, B.K. Sarkar. Overall performance analysis and GRA optimization of solar air heater with truncated half conical vortex generators. Solar Energy 196, 637-652, 2020.
40. . Alom, N., and Saha, U. K., 2019. Drag and lift characteristics of a novel ellipticalbladed Savonius rotor with vent augmenters, ASME Journal of Solar Energy Engineering, Vol. 141, No. 5, p. 051007.
41. S. Roy, T. Bose, K. Debnath, Behaviour of glass fiber-reinforced composite with delamination under Iosipescu shear test, International Journal of Modern Manufacturing Technologies, Vol.-11(2), 119-125, 2019.
42. N. Hanuman, S. Roy, T. Bose, Resonant activation of different intermodulation frequencies using dual excitations, Ultrasonics, Vol.-106, 106138, 2020.
43. N. Hanuman, S. Roy, T. Bose, Detection of local defect resonance intermodulation peaks using bicoherence analysis, International Journal of Mechanical Sciences, Vol.- 163, 105092, 2019.
44. GB Murali, B Deepak, MVA Raju, BB Biswal, Optimal robotic assembly sequence planning using stability graph through stable assembly subset identification, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …
45. A Das, SK Patel, BB Biswal, SR Das, Performance evaluation of aluminium oxide nano particles in cutting fluid with MQL technique in turning of hardened AISI 4340 alloy steel, Scientia Iranica
46. A Das, SK Patel, BB Biswal, SR Das, Machinability investigation and cost estimation during finish dry hard turning of AISI 4340 steel with untreated and cryo treated cermet inserts, Journal of Superhard Materials 41 (4), 247-264
47. GB Mahanta, A Rout, B Deepak, BB Biswal, Application of Meta-Heuristic Optimization Techniques for Design Optimization of a Robotic Gripper, International Journal of Applied Metaheuristic Computing (IJAMC) 10 (3), 107-133
48. BK Khamari, SS Dash, SK Karak, BB Biswal, Effect of welding parameters on mechanical and microstructural properties of GMAW and SMAW mild steel joints, Ironmaking & Steelmaking, 1-8
49. B Deepak, G Bala Murali, MVAR Bahubalendruni, BB Biswal, Assembly sequence planning using soft computing methods: a review, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …

Chemical & Biological Sciences


1. S. Rana, S. Sarmah, A. Singha Roy, K. S. Ghosh*, Journal of Biomolecular Structure and Dynamics (Accepted article), 2020, DOI: 10.1080/07391102.2020.1738960.
2. S. Das, Z. Hazarika, S. Sarmah, K. Baruah, M. A. Rohman, D. Paul, A. N. Jha, A. Singha Roy*, Journal of Photochemistry and Photobiology B: Biology, (Accepted Article), 2020, DOI: 10.1016/j.jphotobiol.2020.111825.
3. S. Sarmah, S. Pahari, S. Das, V. K. Belwal, M. Jana, A. Singha Roy, Journal of Biomolecular Structure and Dynamics (Accepted article), 2020, DOI: 10.1080/07391102.2019.1711196.
4. S. Das, S. Sarmah, Z. Hazarika, M. A. Rohman, P. Sarkhel, A. N. Jha, A. Singha Roy*, Physical Chemistry Chemical Physics (Accepted article), 2020, DOI: 10.1039/C9CP05301H.
5. S. Das, S. Sarmah, A. Singha Roy*, New Journal of Chemistry (Accepted article), 2019, DOI: 10.1039/C9NJ03938D.
6. S. Das, S. Pahari, S. Sarmah, M.A. Rohman, D. Paul, M. Jana, A. Singha Roy, Physical Chemistry Chemical Physics, 2019, 21, 12649-12666. DOI: 10.1039/C9CP01128E.
7. N. K. Nath, P. Gupta, P. J. Hazarika, N. Deka, A. Mukherjee and G. K. Dutta, Crystal Growth & Design, 2019, 19, 6033-6038.
8. Poonam Gupta, Sumair A. Rather, Binoy K. Saha, Tamas Panda, Durga Prasad Karothu, and Naba K. Nath*, Crystal Growth & Design, 2020, 20, 5, 2847–2852.
9. N. Deka, J. Barman, S. Kasthuri, V. Nutalapati* and G. K. Dutta*, Appl. Surf. Sci., 2020, 511, 145576.
10. . N. K. Nath, P. Gupta, P. J. Hazarika, N. Deka, A. Mukherjee and G. K. Dutta, Crystal Growth & Design, 2019, 19, 6033-6038.
11. . G. K. Dutta, S. Kasthuri, G. Marappan, S. V. Jayaraman, Y. Sivalingam, C. Di Natale and V. Nutalapati, J. Mater. Chem. C, 2019, DOI: 10.1039/C9TC02226K.
12. N. Deka, J. Barman, J. Deka, K. Raidongia and G. K. Dutta*, ChemElectroChem, 2019, 6, 3327-3336
13. D. Paul, A. Borah, S. Khatua, P. N. Chatterjee*, Asian Journal of Organic Chemistry, 2019, 8 (10), 1870-1878.
14. D. Paul, S. Khatua, P. N. Chatterjee*, New Journal of Chemistry, 2019, 43, 10056- 10065.
15. M. L. Sawkmie, D. Paul, S. Khatua, P. N. Chatterjee*, Journal of Chemical Sciences, 2019, 131:51.
16. M. L. Sawkmie, D. Paul, G. Kalita, K. Agarwala, P. K. Maji, P. N. Chatterjee*, Journal of Heterocyclic Chemistry, 2019, 56 (12), 3277-3288.
17. H. Mahanta, D. Baishya, Sk. S. Ahamed, and A. K. Paul*, Accepted in J. Chem. Phys. A 123, 5019-5026 (2019).
18. S. S. Ahamed, H. Mahanta, A. K. Paul*, Chem. Phys. Letts. 730, 630-633
19. S. S. Ahamed, H. Mahanta, A. K. Paul*, J. Phys. Chem. A 123, 10663–10675 (2019)
20. S. Rudra, R. Chakraborty, P. K. Maji, S. Koley, A. K. Nayak, D. Paul and M. Pradhan, Electrochim. Acta, 2019, 324, 134865-134879.
21. S. S. Singha, S. Rudra, S. Mondal, M. Pradhan, A. K. Nayak, B. Satpati, P. Pal, K. Das, A. Singha, Electrochim. Acta, 2020, 338, 135815-135827.

Humanities & Social Sciences


1. R. Lyngwa, P. S. Mangang, ‘Communicating and Resisting Oppression: Using Drama for Communication Skills and Social Consciousness in Language Classrooms’, International Journal of Recent Technology and Engineering, Vol.8, Issue.3S2, October 2019.
2. R. Lyngwa, P. S. Mangang, ‘Constructing Indigenous Oppression and Resistance in Tendulkar’s Encounter in Umbugland’, RELIGACIÓN Revista de CienciasSociales y Humanidades. Vol.4, Issue.19, September 2019.

Mathematics


1. A. Bhandari, D. Borah and S. Mukherjee, “Characterizations of Weaving KFrames”, Proc. Japan Acad. Ser. A Math. Sci., Vol. 96 (5), pp.39–43, 2020.
2. A. Bhandari and S. Mukherjee, “Characterizations of Woven Frames”, to be appeared in Int. J. Wavelets Multiresolution Inf. Process., DOI: 10.1142/S0219691320500332,
3. A. Bhandari and S. Mukherjee, “Atomic Subspaces for Operators”, to be appeared in Indian J. Pure Appl. Math, Springer.
4. G. Gopi Krishna, Srinivas Jangili, S.R. Mishra, S. Sreenadh, Numerical Investigation of entropy generation in microporous channel with thermal radiation and buoyancy force, Indian Journal of Physics (Springer), 93(11), pp. 1465–1476, 2019.
5. Debraj Roy and Tikaram Subedi, “Generalized semicommutative rings”, Vestnik St..Peters. Univ. Math, Vol 53, pp 68-76, 2020
6. Debraj Roy and Tikaram Subedi, “On a generalization of reversible rings”, An. Stiint. Univ. Al. I. Cuza Iasi. Mat. (N.S.) Tomul LXV, 2019, f. 2
7. Debraj Roy and Tikaram Subedi, “On semireversible rings”, To be appeared in Asian European Journal of Mathematics
8. Tikaram Subedi and Debraj Roy, “On a common generalization of symmetric rings and quasi duo rings”, To be appeared in Algebra and Discrete Mathematics.
9. B Ghosh, OL Zhdanova, B Barman, EY Frisman, Dynamics of stage-structure predator-prey systems under density-dependent effect and mortality, Ecological Complexity 41, 100812, 2020.
10. D Pal, TK Kar, A Yamauchi, B Ghosh, Balancing maximum sustainable yield and ecological resilience in an exploited two-predator one-prey system, Biosystems 187, 104064, 2020.
11. D Pal, B Ghosh, TK Kar, Hydra effects in stable food chain models, Biosystems 185, 104018, 2019.
12. GP Neverova, OL Zhdanova, B Ghosh, EY Frisman, Dynamics of a discrete-time stage-structured predator–prey system with Holling type II response function, Nonlinear dynamics 98 (1), pp. 427-446, 2019.
13. B Barman, B Ghosh, Explicit impacts of harvesting in delayed predator-prey models, Chaos, Solitons & Fractals 122, 213-228, 2019.

Physics


1. Mesomorphic, electro-optic and dielectric behaviour of a semi-fluorinated chiral liquid crystalline material forming polar smectic phases, D Gupta, P Kula, A Bhattacharjee, Journal of Molecular Structure, 128557, 2020
2. Detailed investigation of N-(4-n-pentyl-oxybenzylidene)-4′-n-hexylaniline liquid crystal moleculeD Gupta, A Bhattacharjee, Journal of Molecular Structure 1196, 66- 77, 2019
3. Comparative Raman study of two laterally fluorinated LC compounds having different terminal chains, M Lyndem, R Dabrowski, A Bhattacharjee, Liquid Crystals 46 (7), 1145-1155, 2019
4. Raman and FTIR Study of a 2, 3'-difluoro-4''-isothiocyanato-4-propyl-1, 1': 4', 1''- terphenyl compound or C3P (3F) P (3F) P-NCS, M Lyndem, A Bhattacharjee, R Dabrowski, Molecular Crystals and Liquid Crystals 681 (1), 45-57, 2019
5. Experimental and DFT generated Raman study of two bent-core monomeric liquid crystalline compounds, D Bhattacharjee, R Mishra, R Dabrowski, A Bhattacharjee, Liquid Crystals 46 (3), 367-375, 2019
6. Temperature-dependent Raman study of pure and silver nanoparticles dispersed N-(4- n-heptyloxybenzylidene)-4’-n-butylaniline (7O. 4), R Mishra, A Bhattacharjee, D Bhattacharjee, KN Singh, PR Alapati, Liquid Crystals 46 (3), 327-339, 2019
7. Cosmological Dark Matter in a Conformal Model, PrasenjitSanyal, Alekha C. Nayak, Gopal Kashyap, and Pankaj Jain, Phys. Rev. D 100 (11), 115032, 2019. DOI: 10.1103/PhysRevD.100.115032
8. Baryon-Dark matter interaction in presence of magnetic fields in light of EDGES signal, Jitesh R. Bhatt, Pravin K Natwariya, Alekha C. Nayak, Arun Kumar Pandey, Eur.Phys.J.C 80 (4), 334, 2020. DOI: 10.1140/epjc/s10052-020-7886-x
9. Role of fluid mechanical effects in activating phase transition of laser induced TiO2 nanoparticles, P. Sharma and A. Nath, Laser Physics (accepted), 2020.

Civil Engineering


1. Umesh, R., Kumar S., and Sharma, H. “Finite element analysis of hybrid composite materials under the ballistic impact” Second ASCE conference on CRSIDE 2020 (Accepted)
2. Umesh, R., Kumar S., and Sharma, H. “Progress and Evolution in Fatigue studies of Advanced Composite Materials” Second ASCE conference on CRSIDE 2020 (Accepted)
3. Umesh, R., Kumar S., and Sharma, H. “Blast Induced Brain Traumatic Injury: Current progress and challenges” 6th national symposium on shock waves 2020, IIT Madras, (Accepted)
4. Kaushik, S., Bairagi, S., Siddagangaiah, A.K.;“Moisture susceptibility assessment of cement and RBI-81 stabilized soils”,2nd ASCE conference in India on Challenges of Resilient and Sustainable Infrastructure Development in Emerging Economies, Novotel Kolkata Hotel and Residences, Kolkata, India, March 02 - 04, 2020.
5. Kaushik, S., Prodhani,S.I., Siddagangaiah, A.K.“Characterization of a clayey soil using the cyclic CBR test”,2nd ASCE conference in India on Challenges of Resilient and Sustainable Infrastructure Development in Emerging Economies, Novotel Kolkata Hotel and Residences, Kolkata, India, March 02 - 04, 2020.
6. Jaswanth G., Kumar S., Kumar A., and Sharma H., “Numerical technique for prestressing post-tensioning members subjected to missile impact load,” Proceedings of ICCMS 2019, IIT Mandi, India
7. Chakraborty R, Dey Arindam, “Effect of Spatial Variation of Soil on Probabilistic Slope Stability Analysis for Cut Slopes”, In proceedings of International Conference on Landslide and Slope Stabilty (SLOPE 2019), Bali, Indonesia, 2019.
8. J Sharailin Gidon and Smrutirekha Sahoo (2019). “Stability of slope during rainfall: A finite element approach.” Seventh Indian Young Geotechnical Engineers Conference, Silchar, India, March 15-16, 209-214.
9. Kruthi Kiran Ramagiri, Darshan Chauhan, Shashank Gupta, ArkamitraKar, Dibyendu Adak, EvaluationofStructural Performance of Concrete with Ambient Cured Alkali-Activated Binders, SECON 2019: Proceedingsof SECON'19 pp 1-10.
10. Dr. Ganesh Ch Dhal, RAEEHS -2019, Siksha 'O' Anusandhan Deemedto be University Bhubaneswar-751030, Odisha, India

Computer Science And Engineering


1. Pradhan, Buddhadeb, Diptendu Sinha Roy, and Nirmal Baran Hui. "Multi-agent Navigation and Coordination Using GA-Fuzzy Approach." In Soft Computing for Problem Solving, pp. 793-805. Springer, Singapore, 2019.
2. Singh, A. P., Kumar, G. H., Paik, S. S., & Roy, D. S. (2019). Storage and Analysis of Synchrophasor Data for Event Detection in Indian Power System Using Hadoop Ecosystem. In Data and Communication Networks (pp. 291-304). Springer, Singapore.
3. Roy, Diptendu Sinha. (2019) "A Study on DRX Mechanism for Wireless Powered LTEEnabled IoT devices." In 2019 IEEE International Conference on Consumer ElectronicsTaiwan (ICCE-TW), pp. 1-2. IEEE, 2019.
4. Pradhan, B., Roy, D. S., & Hui, N. B. (2019). Multi-agent Navigation and Coordination Using GA-Fuzzy Approach. In Soft Computing for Problem Solving (pp. 793-805). Springer, Singapore.
5. Nath, Bipasha, and Diptendu Sinha Roy. (2019) "Characterizing Single Line to Ground (SLG) Events with Indian Power Grid’s Synchrophasor Data." In International Conference on Innovation in Modern Science and Technology, pp. 710-718. Springer, 2019.
6. Ajij, M., Roy, D. S., &Pratihar, S. (2019). Plant Leaf Recognition using Geometric Features and Pearson Correlations. In 2019 International Conference on Image and Vision Computing New Zealand (IVCNZ) (pp. 1-6). IEEE.
7. Behera, R. K., Reddy, K. H. K., & Roy, D. S. (2020). A Novel Context Migration Model for Fog-Enabled Cross-Vertical IoT Applications. In International Conference on Innovative Computing and Communications (pp. 287-295). Springer, Singapore.
8. Mudali, G., Reddy, K. H. K., & Roy, D. S. (2020). Efficient Evolutionary Approach for Virtual Machine Placement in Cloud Data Center. In International Conference on Innovative Computing and Communications (pp. 247-255). Springer, Singapore.
9. Pradhan, B., Hui, N. B., & Roy, D. S. (2020). Heuristic Coordination for Multi-agent Motion Planning. In International Conference on Innovative Computing and Communications (pp. 569-578). Springer, Singapore.
10. Ashu A, Mir Wajahat Hussain, Diptendu Sinha Roy and Hemant Kumar Reddy, (2020) “Intelligent Data Compression Policy for Hadoop Performance Optimization”, In SoCPaR 2019 (Accepted)
11. K T Sai Akhil, D Rishabh, N Sai Suprabhath, Kritesh P, BalimidiMallikarjuna, D S Roy, M Jaya Bharata Reddy and D K Mohanta, (2020), “Dynamic State Estimation of Synchronous Generator Ro-tor Angle Using PMU and EKF”, ICETSGAI 4.0 (Accepted).
12. SoumenMoulik, Debapratim Dey, Kaushik Ray, and Kamal Das, “Reliable Transmission of Critical Packets in IEEE 802.15.4-based Body Area Networks”, IEEE ANTS, Goa, India, Dec. 2019.
13. SoumenMoulik, Kaushik Ray, “d-CARE: Context-Aware Regulation of Backoff Delay in Wireless Personal Area Networks”, IEEE TENCON, Kerala, India, Oct. 2019, DOI: 10.1109/TENCON.2019.8929352.
14. Anil Ku. Swain, Bunil Kumar Balabantaray, Jitendra Kumar Rout and An Optimal Deep learning approach for Classification of Age Groups in Social Network", 11th International Multi-Conference on Complexity, Informatics and Cybernetics (IMCIC 2020), Orlando, USA, on 10th -13th March, 2020. C. Lalengmawia, and A. Chakrabarty, “Compiling NCV Quantum Circuits for Nearest Neighbour Realization”, Proc. 2020 International Conference on Emerging Trends in Information Technology and Engineering, Vellore, India, IEEE Publications, 24-25 Feb 2020, pp. 1-5, doi: 10.1109/ic-ETITE47903.2020.305. Deepak Kumar and Prabir Saha, “Accelerating latency of binary division through Vedic methodology”, Fourth International Conference on Smart Trends for Computing and Communications, Bangkok, Thailand, 24-25 January 2020.
15. S. C. Barik, S Mohapatra, B. Das, M. Acharya, B K Balabantaray, “Advanced Colored Image Encryption Method using Evolution Function”, in International Conference on Machine Learning and Computational Intelligence (2019-ICMLCI), 14th -15th December, 2019.
16. I B Prasad, B Rout, V Pal, Yogita “M-Way Balanced Tree Data Aggregation Approach for Clustered Wireless Sensor Networks”, OWT, 2019.
17. V Pal Anju Yadav, Yogita, “Analysis of Optimal Number of Cluster Heads on Network Lifetime in Clustered Wireless Sensor Networks”, International Conference on Deep Learning, Artificial Intelligence and Robotics, (ICDLAIR) 2019.
18. V Pal, IB Prasad, B Rout, Yogita, “Fuzzy Logic Based Clustering for Energy Efficiency in Wireless Sensor Networks”, International Conference on Deep Learning, Artificial Intelligence and Robotics, (ICDLAIR) 2019.
19. Vinay Kumar, A alxim Prasanna, Dush Nalin, K Jayakody, Akhilendra Paratp Singh, Compressive Data Gathering for MI Based Clustered Non-Conventional WSNs, International Conference on Emerging Technologies of Information and Communications (ETIC 2019), Bhutan, March, 2019
20. Nihar Ranjan Pradhan, Vinay Kumar, Akhilendra Pratap Singh,” Blockchain Enabled Traceable, Transparent Transportation System For Blood Bank”, 2nd International conference on VLSI (very-large-scale integration), communication and signal processing, Springer Nature,2019, 21-23 October 2019, MNNIT Allahabad, India
21. M Sarkar, JW Sangma, Yogita, V Pal “Human Behaviour Analysis: Using Clustering for Identifying Co-evolving EEG Data Streams”, Ninth International Workshop Statistical Analysis of Neuronal Data (SAND9), University of Pittsburgh, Pittsburgh, USA, May 21 - 23, 2019.
22. Upasana, J. Sangma, V. Pal, Yogita "Data-Driven Extraction of Quantitative Multidimensional Associations of Cardiovascular Drugs and Adverse Drug Reactions." In International Conference on Practical Applications of Computational Biology & Bioinformatics, pp. 70-77. Springer, Cham, 2019.

Electrical Engineering


1. S. Deb Roy and Sanjoy Debbarma, "Mitigation of Intrusions to ACE Signals in Power System Networks", IEEE PESGRE 2020, 2nd - 4th January 2020, Kerala, India.
2. R. Wilson, R. Gandhi, A. Kumar and R. Roy, "Design and Analysis of Twin-Rotor Axial Flux Permanent Magnet Synchronous Motor for Electric Bicycle using 3D Finite Element Analysis," 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE 2020), Cochin, India, 2020, pp. 1-6, doi: 10.1109/PESGRE45664.2020.9070706.
3. A. Kumar, R. Gandhi, R. Wilson and R. Roy, "Analysis of Permanent Magnet BLDC Motor Design with Different Slot Type," 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy(PESGRE 2020), Cochin, India, 2020, pp. 1-6, doi: 10.1109/PESGRE45664.2020.9070532.
4. Mukesh Kumar and Shaik Affijulla, Estimation of Alternator Rotor Angle by using Synchronized Voltage and Current Phasors, IEEE Calcutta Conference (CALCON), 28-29 February, 2020, Kolkata, India,.
5. Aniruddha Agarwal, Dallang M Momin, DonnagratiaSyndor and Shaik Affijulla, Impact Analysis of Cyber Attack under Stable State of Power System: Voltage Stability, IEEE Region 10 Symposium (TENSYMP), 5-7 June 2020, Dhaka, Bangladesh,.
6. Gaurav Bhatt and Shaik Affijulla, Integration of Solar Power into Electric Grid based on Voltage at Critical Contingency, IEEE Region 10 Symposium (TENSYMP), 5-7 June 2020, Dhaka, Bangladesh,
7. Avigyan Roy, Pratikanta Misra, Atanu Banerjee, “Effect of Sampling on Steady-State Time-Varying Output of DPWM Controlled Buck Converter”,IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE2020), Cochin, Kerala, 2nd -4 th January,2020.
8. Abhilash Sen, Atanu Banerjee, HaricharanNannam, “A comparative analysis between two DPFC models in a grid connected Hybrid Solar- Wind Generation system” ,IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE-2020), Cochin, Kerala, 2nd -4 th January,2020.
9. K. P. Panda, P. R. Bana and G. Panda, "A Single Source Switched-Capacitor Based Multilevel Inverter for Photovoltaic Application," 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE 2020), Cochin, India, 2020, pp. 1-6, doi: 10.1109/PESGRE45664.2020.9070546.
10. P. R. Bana, K. P. Panda and G. Panda, "Novel Reduced Source Switched-Capacitor Boost Multilevel Inverter for Photovoltaic Application," 2020 IEEE International Conference on Power Electronics, Smart Grid and Renewable Energy (PESGRE 2020), Cochin, India, 2020, pp. 1-6, doi: 10.1109/PESGRE45664.2020.9070729.
11. Sanjoy Debbarma, C. Hazarika and S. Deb Roy, "SPC based approach for Frequency Control of Power Systems Penetrated with Fast Acting Reserve", 8th IEEE International Conference on Power Systems2019, 20th - 22nd Dec 2019, Jaipur, India.
12. Prakash Chandra Gupta, Atanu Banerjee and Piyush Pratap Singh, Analysis and Control of Chaotic Oscillation in FOSMIB Power System Using AISMC Technique, 5 th Students Conference on Engineering and Systems (SCES), MNNIT Allahabad, India, May 29-31, 2019.
13. Piyush Pratap Singh and Binoy Krishna Roy, A novel chaotic system with parachute and thumb shapes of Poincare map, 12th Conference on Nonlinear Systems and Dynamics (CNSD), IIT Kanpur, 12-15 December, 2019.
14. Sugandha and Piyush Pratap Singh, A complex state variable based novel hyperchaotic system with nine equilibria, 12th Conference on Nonlinear Systems and Dynamics (CNSD), IIT Kanpur, 12-15 December, 2019.
15. Abhilash Sen, Atanu Banerjee, HaricharanNannam, " Performance Analysis of UPFC and DPFC in a Grid Connected Hybrid Solar-Wind Generation System",11th International Exergy, Energy and Environment symposium (IEEES 11-2019), SRM University, Chennai, India, July 14-18, 2019.
16. Hari CharanNannam, Atanu Banerjee, “A novel fuzzy logic controlled Vienna rectifier to extract maximum power in the grid Connected wind energy system applications”, 11th International Exergy, Energy and Environment symposium (IEEES 11-2019), SRM University, Chennai, India, July 14-18, 2019.
17. Abhilash Sen, Atanu Banerjee, HaricharanNannam, "A comparative analysis between UPFC and DPFC in a grid connected Photovoltaic System", IEEE INCOS19, Madurai, India, April ,2019.
18. P. C. Gupta, A. Banerjee, P. P. Singh, - “Analysis and Control of Chaotic Oscillation in FOSMIB Power System Using AISMC Technique," in 5th Students’ Conference on Engineering and Systems, (SCES-2019) at MNNIT Allahabad, 29th -31st May, 2019. N. Babu P., R. B. Peesapati and G. Panda, "An Adaptive Current Control Technique in Grid-tied PV System with Active Power Filter for Power Quality Improvement," TENCON 2019 - 2019 IEEE Region 10 Conference (TENCON), Kochi, India, 2019, pp. 187-191, doi: 10.1109/TENCON.2019.8929487.
19. P. N. Babu, P. R. Babu, B. Chittibabu and G. Panda, "Three-Phase Grid-tied Photovoltaic System with an Adaptive Current Control Scheme in Active Power Filter," 2019 IEEE 1st International Conference on Energy, Systems and Information Processing (ICESIP), Chennai, India, 2019, pp. 1-6, doi: 10.1109/ICESIP46348.2019.8938367. S. K. Prince, K. P. Panda, M. Patowary and G. Panda, "FPA tuned Extended Kalman Filter for Power Quality Enhancement in PV integrated Shunt Active Power Filter," 2019 International Conference on Computing, Power and Communication Technologies (GUCON), NCR New Delhi, India, 2019, pp. 257-262. K. P. Panda, P. R. Bana and G. Panda, "Design and Control of An Asymmetrical Cascaded Compact Module Multilevel Inverter for PV System," TENCON 2019 - 2019 IEEE Region 10 Conference (TENCON), Kochi, India, 2019, pp. 2616-2621, doi: 10.1109/TENCON.2019.8929608.
20. K. P. Panda, P. R. Bana and G. Panda, "Design and Control of A Switched-Diode Multilevel Inverter for Photovoltaic Application," 2019 IEEE Milan PowerTech, Milan, Italy, 2019, pp. 1-6, doi: 10.1109/PTC.2019.8810526.
21. P. N. Babu, P. R. Bana, R. B. Peesapati and G. Panda, "An Interleaved Buck Converter Based Active Power Filter for Photovoltaic Energy Application," 2019 International Conference on Power Electronics Applications and Technology in Present Energy Scenario (PETPES), Mangalore, India, 2019, pp. 1-6, doi: 10.1109/PETPES47060.2019.9003964.
22. S. J. Pinto, N. B. P, R. Peesapati and G. Panda, "Monitoring and Control of MultiBus Microgrid System Using FPGA Platform," 2019 IEEE Region 10 Symposium (TENSYMP), Kolkata, India, 2019, pp. 260-265, doi: 10.1109/TENSYMP46218.2019.8971116.
23. P. N. Babu, R. B. Peesapati and G. Panda, "A Pre-filtering based Current Control Strategy in Grid-tied Photovoltaic Systems with Active Power Filter for Harmonic Mitigation," TENCON 2019 - 2019 IEEE Region 10 Conference (TENCON), Kochi, India, 2019, pp. 1003-1008, doi: 10.1109/TENCON.2019.8929638.
24. Darshan Prakash Borthakur and Supriyo Das, “Understanding the Life and Ageing of XLPE Insulation considering Free Energy Barrier Concept”, IEEE 4th International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), November 2019, India.
25. Ashok Narayan Tripathi, Adnan Iqbal and Supriyo Das, “Understanding the Ageing of XLPE Cable Insulation using Impedance Analyser”, IEEE International Conference on Electrical, Electronics and Computer Engineering (UPCON), November 2019, India.
26. B. Thangabalan and Supriyo Das, “Understanding the Flashover Characteristics across Stay Arm Insulator due to Lightning Stroke”, IEEE 11th Asia – Pacific International Conference on Lightning (APL), June 2019, Hong Kong.
27. R. Chakrabarty and R. Adda, "Reduced Switch Single DC Source Cascaded H-bridge Multilevel Inverter based DSTATCOM," IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, 2019, pp. 7074-7079, doi: 10.1109/IECON.2019.8927119.

Electronics & Communication Engineering


1. Shashi Kumar, Gaddiella Diengdoh Ropmay, Peesapati Rangababu, Pradeep Kumar Rathore and Jamil Akhtar , “ A Comparative Study on Sensitivity Enhancement of p- and n-channel MOSFET based Current Mirror Integrated Pressure Sensor Using Differential Amplifier ”, 2020 Flexible Electronics for Electric Vehicles (FlexEV-2020), Jaipur, India, 5-6 March 2020 (Presented and Accepted for AIP Proceedings).
2. GaddiellaDiengdohRopmay, Shashi Kumar, PeesapatiRangababu, Pradeep Kumar Rathore and Jamil Akhtar, “ A novel MEMS-based Blood Glucose Measurement Sensor using Twin-Cantilever Structure ”, 2020 Flexible Electronics for Electric Vehicles (FlexEV-2020), Jaipur, India, 5-6 March 2020 (Presented and Accepted for AIP Proceedings).
3. V. M. Telajala, W. H. Sheikh, S. Mishra and A. Dandapat, "A Low-Power SplitControlled Single Ended Storage Content Addressable Memory," 2019 IEEE International Symposium on Smart Electronic Systems (iSES) (Formerly iNiS), Rourkela, India, 2019, pp. 369-372, doi: 10.1109/iSES47678.2019.00091
4. T. V. Mahendra, S. W. Hussain, S. Mishra and A. Dandapat, "Design and Implementation of Drivers and Selectors for Content Addressable Memory (CAM)," 2019 IEEE 2nd International Conference on Electronics and Communication Engineering (ICECE), Xi'an, China, 2019, pp. 216-220, doi: 10.1109/ICECE48499.2019.9058571.
5. S. W. Hussain, T. V. Mahendra, S. Mishra and A. Dandapat, "Efficient Matchline Controller for Hybrid Content Addressable Memory," 2019 IEEE 2nd International Conference on Electronics and Communication Engineering (ICECE), Xi'an, China, 2019, pp. 418-422, doi: 10.1109/ICECE48499.2019.9058537.
6. S. W. Hussain, T. V. Mahendra, S. Mishra and A. Dandapat, "A Quasi-Static Storage and Decision Block for Performance-Efficient Content Addressable Memory," 2019 IEEE 6th International Conference on Engineering Technologies and Applied Sciences (ICETAS), Kuala Lumpur, Malaysia, 2019, pp. 1-6, doi: 10.1109/ICETAS48360.2019.9117334.
7. T. V. Mahendra, S. W. Hussain, S. Mishra and A. Dandapat, "Low Match-Line Voltage Swing Technique for Content Addressable Memory," 2019 7th International Conference on Smart Computing & Communications (ICSCC), Sarawak, Malaysia, Malaysia, 2019, pp. 1-5, doi: 10.1109/ICSCC.2019.8843590.
8. T. V. Mahendra, S. Wasmir Hussain, S. Mishra and A. Dandapat, "Performance Analysis of N-CAM, P-CAM and TG-CAM Using 45-nm Technology," 2019 International Conference on Intelligent Computing and Control Systems (ICCS), Madurai, India, 2019, pp. 621-625, doi: 10.1109/ICCS45141.2019.9065404.
9. A. Gudmalwar, A. Dutta and C. V. R. Rao, "Estimation of Fundamental Frequency of Noisy Speech Signals using Correlogram based on Subband Filtering," 2019 IEEE 6th International Conference on Engineering Technologies and Applied Sciences (ICETAS), Kuala Lumpur, Malaysia, 2019, pp. 1-5, doi: 10.1109/ICETAS48360.2019.9117333.
10. A. Dutta, G. Ashishkumar and C. V. Rama Rao, "Auditory inspired Acoustic Model for Hybrid ASR System using Gammatone based Gabor Filters," 2019 IEEE International Symposium on Signal Processing and Information Technology (ISSPIT), Ajman, United Arab Emirates, 2019, pp. 1-6, doi: 10.1109/ISSPIT47144.2019.9001859.
11. S. Gogoi and R. Peesapati, "Design and Implementation of low power 4 × 4/8 × 8 2DDTT architecture for image and video compression," 2019 Women Institute of Technology Conference on Electrical and Computer Engineering (WITCON ECE), Dehradun Uttarakhand, India, 2019, pp. 200-205, doi: 10.1109/WITCONECE48374.2019.9092937.
12. S. J. Pinto, N. B. P, R. Peesapati and G. Panda, "Monitoring and Control of MultiBus Microgrid System Using FPGA Platform," 2019 IEEE Region 10 Symposium (TENSYMP), Kolkata, India, 2019, pp. 260-265, doi: 10.1109/TENSYMP46218.2019.8971116.
13. D. I. Kaplun et al., "Hardware Implementation of Video Processing Device using Residue Number System," 2019 42nd International Conference on Telecommunications and Signal Processing (TSP), Budapest, Hungary, 2019, pp. 701-704, doi: 10.1109/TSP.2019.8768827.
14. P. N. Babu, P. R. Bana, R. B. Peesapati and G. Panda, "An Interleaved Buck Converter Based Active Power Filter for Photovoltaic Energy Application," 2019 International Conference on Power Electronics Applications and Technology in Present Energy Scenario (PETPES), Mangalore, India, 2019, pp. 1-6, doi: 10.1109/PETPES47060.2019.9003964.
15. N. Babu P., R. B. Peesapati and G. Panda, "An Adaptive Current Control Technique in Grid-tied PV System with Active Power Filter for Power Quality Improvement," TENCON 2019 - 2019 IEEE Region 10 Conference (TENCON), Kochi, India, 2019, pp. 187-191, doi: 10.1109/TENCON.2019.8929487.
16. P. N. Babu, R. B. Peesapati and G. Panda, "A Pre-filtering based Current Control Strategy in Grid-tied Photovoltaic Systems with Active Power Filter for Harmonic Mitigation," TENCON 2019 - 2019 IEEE Region 10 Conference (TENCON), Kochi, India, 2019, pp. 1003-1008, doi: 10.1109/TENCON.2019.8929638.
17. S. Gogoi and R. Peesapati, "A Hybrid Motion Estimation Search Algorithm for HEVC/H.265," 2019 IEEE International Symposium on Smart Electronic Systems (iSES) (Formerly iNiS), Rourkela, India, 2019, pp. 129-132, doi: 10.1109/iSES47678.2019.00037.
18. R. Peesapati and S. L. Sabat, "Programmable Auxiliary Co-Processing Unit for H.264 Decoder," 2019 IEEE International Symposium on Smart Electronic Systems (iSES) (Formerly iNiS), Rourkela, India, 2019, pp. 172-176, doi: 10.1109/iSES47678.2019.00046.
19. S. Kumar, G. D. Ropmay, P. Rangababu and P. K. Rathore, "A Stress Sensitive CMOS Operational Amplifier Based Pressure Sensor with Varying Input and Gain," 2019 IEEE 9th International Conference on System Engineering and Technology (ICSET), Shah Alam, Malaysia, 2019, pp. 408-413, doi: 10.1109/ICSEngT.2019.8906336.
20. S. Kumar, G. D. Ropmay, P. Kumar Rathore and P. Rangababu, "An idea of implementing CMOS operational amplifier in summer configuration for the designing of highly sensitive pressure transducer," 2019 2nd International Conference on Innovations in Electronics, Signal Processing and Communication (IESC), Shillong, India, 2019, pp. 211-214, doi: 10.1109/IESPC.2019.8902445.
21. J. A. Arjun and S. Majumdar, "Development of Approximate Compressor Based Hybrid Dadda Multiplier for Image De-noising Applications," 2019 IEEE 16th India Council International Conference (INDICON), Rajkot, India, 2019, pp. 1-4, doi: 10.1109/INDICON47234.2019.9030269.
22. Kavita, C. Sahu and S. Majumdar, "RF parameter extraction and S-parameter analysis of junctionless silicon nanowire transistor," 2019 2nd International Conference on Innovations in Electronics, Signal Processing and Communication (IESC), Shillong, India, 2019, pp. 7-12, doi: 10.1109/IESPC.2019.8902348.
23. M. S. Singh and A. Sarkhel, "Isolation Enhancement of Antenna Pair for Implantable Application," 2020 URSI Regional Conference on Radio Science (URSI-RCRS), Varanasi, India, 2020, pp. 1-4, doi: 10.23919/URSIRCRS49211.2020.9113627.
24. N. Shafi, J.S. Parmaar, A. Porwal, A.M. Bhat, C. Sahu, C. Periasamy, S. Majumdar “Back Gate Tunable Thin Film $\alpha $–Si Nanowire BioFET for pH Detection By Compatible CMOS Fabrication Process.” In2020 4th IEEE Electron Devices Technology &; Manufacturing Conference (EDTM) 2020 (pp. 1-4). IEEE.
25. R. U. Ahmed, P. Saha, Implementation Aspects of Multi-bit Adders using UTBSOI Transistors, in Smartcom, 2020, 24-25 January.

Mechanical Engineering


1. N Kumar, BK Sarkar, S Maity, Leakage Based Condition Monitoring and Pressure Control of the Swashplate Axial Piston Pump, Gas Turbine India Conference, December, 2019, IIT Chennai, India
2. A. Sahoo, S. K. Dwivedy, and P. S. Robi, “Development of a PID Control Strategy for a Compact autonomous underwater vehicle,” in Proceedings of the ASME 38th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2019), June 9-14, 2019, Glasgow, Scotland.
3. U. Kashyap, K. Das, B. K. Debnath, U. Kashyap, S. K. Saha, Helicity Density Study of Rectangular Vortex Generator with Secondary Surfaces over It, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference, December 28- 31, 2019, IIT Roorkee, Roorkee, India.
4. A. Das, R. S. Das, K. Das, Investigation on Fluid Flow, Heat and Mass transfer Characteristics in a LiCl-H2O Falling Film Absorber, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference, December 28-31, 2019, IIT Roorkee, Roorkee, India.
5. Bezbaruah, P.J., Kumar, R., Das, R.S., “Thermohydraulic performance analysis of solar air heater with helical roughness,” Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer conference (IHMTC-2019), pp. 233-237.
6. S. Kr. Rajbongshi, D. K. Sarma, Application of Taguchi’s orthogonal array and overall evaluation criteria in turning of AISI D2 steel in dry and forced air-cooled environment, 1 st International Conference on Emerging Trends in Mechanical Engineering (ICETME-2018), department of Mechanical Engineering, Srinivasa Ramanujan Institute of Technology, Anantapur, Andhra Pradesh, India, Period 20-12- 2018 to 22-12-2018, Proceedings published in Springer Nature Singapore Pte Ltd., Page -177-185, 2020
7. D. K. Sarma, S. Kr. Rajbongshi, A study in turning of AISI D2 steel with Textured and Non-textured coated carbide tool at the flank face, 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (IMMT 2019), Period 20-11-2019 to 22-11-2019, BITS PILANI, Dubai Campus, UAE, Page -6, 2019
8. H. Dutta, K. Debnath, D.K. Sarma, Improving the Performance of μED-Milling using Assisting Electrode for Fabricating Micro-Channels in CFRP Composites, 2nd International Conference on Recent Advances in Materials and Manufacturing Technologies (IMMT 2019), Period 20-11-2019 to 22-11-2019, BITS PILANI, Dubai Campus, UAE, Page -6, 2019
9. Md. A. Ansari, B. K. Debnath, and T. Bose, Measurement of the extent of cavitation using vibration monitoring in a Francis turbine, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Period - December 28-31, 2019, Place - IIT Roorkee, Roorkee, India. http://ishmtdigitallibrary.com/conferences/18a7131602a3b186,7a56f09f53571cac,4f6 3e7d857012f7e.html
10. S. Das, B. K. Debnath, and R. S. Das, Effect on combustion behaviour in the presence of ceramic porous materials on the piston bowl of a diesel engine, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019), Period -December 28-31, 2019, Place - IIT Roorkee, Roorkee, India. http://ishmtdigitallibrary.com/conferences/18a7131602a3b186,7a56f09f53571cac,775 89e5408394c7b.html
11. Deka, S., Babu, P.R. and Rahang, M., 2020. Finite element analysis on the effect of the cross sectional shape on the response of a stress wave force balance. In 6th National Symposium on Shock Waves (NSSW-2020), held from 26-28 February 2020.
12. Deka, S., Babu, P.R. and Rahang, M., 2020. Influence of stress bar length on the response of a stress wave force balance using finite element analysis. International Conference on Advances in Mechanical Engineering (ICAME-2020), during 10-11th January 2020.
13. Deka, S., Babu, P.R. and Rahang, M., 2019. Dynamic Calibration of a Single Component accelerometer force balance under application of impulse loads. In International Heat and Mass Transfer Conference (IHMTC), during December 28-31, 2019, Place - IIT Roorkee, Roorkee, India
14. Deka, S., Babu, P.R. and Rahang, M., 2019. Dynamic calibration of a stress wave force balance under various supports and loads using finite element analysis. In the 32nd International Symposium on Shock Waves (ISSW 32) during 14th to 19th July 2020 at NUS Singapore.
15. Mazarbhuiya, R. M. and Rahang, M., Deposition of Tungsten and Copper Particle on CFRP Composite. (ICRAME 2020)
16. Mazarbhuiya, R. M. and Rahang, M., Surface Modification of Aluminium and its Parametric Optimization using Grey Relational Analysis. Materials today Proceedings. doi.org/10.1016/j.matpr.2020.02.327.
17. Mazarbhuiya, R. M. and Rahang, M., 2020. Parametric Study of Photochemical Machining of Aluminium Using Taguchi Approach. In Advances in Mechanical Engineering (pp. 497-504). Springer, Singapore.
18. Mazarbhuiya, R. M. and Rahang, M., 2020. Multi-objective Optimization of Photochemical Machining Parameters Using Taguchi Grey Relational Analysis. In Emerging Trends in Mechanical Engineering (pp. 283-291). Springer, Singapore.
19. Mazarbhuiya, R. M. and Rahang, M., 2019, March. Parametric Optimization in Photochemical Machining of Aluminium Using Taguchi Method. In IOP Conference Series: Materials Science and Engineering (Vol. 491, No. 1, p. 012033). IOP Publishing.
20. S. Majumder, A. Ghosh, D. N. Basu, G. Natarajan, Development of an IB-TLB solver for fluid-particle interaction in energy management systems, International Conference on Sustainable Energy and Green Technology (SEGT 2019), IOP Conference Series: Earth and Environmental Sciences, 463 (2020), 0120144.
21. N. Hanuman, T. Bose, Bicoherence based study of non-linear intermodulation in delaminated CFRP plate, Conference & Exhibition of the society for NDT (NDE 2019), Period: 5-7 December, Place: Bangalore, 2019.
22. S. Roy, T. Bose, K. Debnath, Nonlinear Ultrasonic Wave Spectroscopy for Detecting Local Defect Resonance Frequency in Delaminated GLARE Plate, IWSHM 2019, Period- 10-12 September, Place- Stanford University, 2019.
23. T. Bose, N. Hanuman, Fully acoustic non-destructive testing (NDT) for carbon fiber reinforced plastic (CFRP) plate, SINCE 2019, Period- 4-5 December, PlaceSingapore, 2019.
24. Alom, N., Kumar, N., and Saha, U. K., 2019. Analyzing the effect of shaft and endplates of a newly developed elliptical-bladed Savonius rotor from wind tunnel tests, Paper No. OMAE2019-95570, ASME 38th International Conference on Ocean, Offshore and Arctic Engineering, June 9-14, 2019, Glasgow, Scotland, UK.
25. Alom N, Das R, and Saha U. K., 2019. A Differential Evolution-Based Inverse Method to Optimize Blade Configurations in Elliptical-Bladed Savonius Wind Turbines, Paper No. GTIndia2019-2352, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.
26. Alom N, Das R, and Saha U. K., 2019. Optimization of aerodynamic parameters of an elliptical-Bladed Savonius wind rotor using multi-objective genetic algorithm, Paper No. GTIndia2019-2346, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.
27. Alom N, and Saha U. K., 2019. Determining the optimal location of vent augmenters in an elliptical-bladed Savonius rotor, Paper No. GTIndia2019-2344, ASME Gas Turbine India Conference, December 05 – 06, Chennai, India.
28. P Venkaiah, BK Sarkar, Modelling and Control of the Hydraulically Actuated Horizontal Axis Wind Turbine Pitch System, Gas Turbine India Conference, December, 2019, IIT Chennai, India.
29. J, Vinod1 , P. Kumar1 and B. K. Sarkar, Modelling of the multiple Francis turbine by velocity diagram for speed control application, The 10th TSME International Conference on Mechanical Engineering, Pattaya, Thailand, 10th – 13rd December 2019,
30. L. Kushwaha1 , P. Venkaiah1 and B. K. Sarkar, Performance analysis of vertical axis wind turbine with optimised pitch angle variation, The 10th TSME International Conference on Mechanical Engineering, Pattaya, Thailand, 10th – 13rd December 2019.

Humanities & Social Sciences


1. A. Ashangbam, ‘The Drowned and the Saved: Testimony to Historical Discernment’, ELCC-2019, Manipur University, 22nd & 23rd November 2019.
2. A. Bhowmick, ‘Depiction of Disability in Greek Mythology’, ELCC-2019, Manipur University, 22nd & 23rd November 2019.
3. R. Lyngwa, ‘Conflict of Ideologies: Ambedkar Versus Gandhi in Tendulkar's Kanyadaan’, International Conference on Interdisciplinarity - Intersections of Literature and History for Social and Cultural Change (COIN-2019), NIT Meghalaya, 19th& 20th October 2019.
4. A. Ashangbam, P. S. Mangang, ‘Quest of Masculine Identity in Primo Levi's If This is a Man’, International Conference on Interdisciplinarity - Intersections of Literature and History for Social and Cultural Change (COIN-2019), NIT Meghalaya, 19th & 20th October 2019.
5. A. Bhowmick, ‘The Depiction of Disability in Indian Mythology’, International Conference on Interdisciplinarity - Intersections of Literature and History for Social and Cultural Change (COIN-2019), NIT Meghalaya, 19th& 20th October 2019.
6. A. Ashangbam, P. S. Mangang, ‘To be and not to be: A Discourse on Guilt and Resentment in Primo Levi’s The Drowned and the Saved’ (Poster Presentation) in the Research Conclave held at NIT Meghalaya on 28th February 2020.

Physics


1. Tribedi Bora, Particle size effect on the suppression of ferromagnetism in Nd0.8K0.2MnO3, Accepted for AIP Conference Proceeding.
2. P. Deb, P. K. Baruah, A. Khare and A. Nath, "Laser Induced Cavitation Bubble Dynamics from Twin Breakdown Sites," 2019 Workshop on Recent Advances in Photonics (WRAP), Guwahati, India, 2019, pp. 1-3, doi: 10.1109/WRAP47485.2019.9013922.

Photo Gallery

Campus Tour

Contact Us

Important Documents

Institutes Facilities

Authorities

Administration

Statutory Committee

Enquiry

ERP Portal

Intranet

Online Admission

Student E-Notice

convocation 2025

Departments

Centres

All

Student's Achievements

Clubs

Festivals

Photo Gallery

EBSB

Event Calendar

Contact Information

Follow Us

Publications

Civil Engineering

Computer Science And Engineering

Electrical Engineering

Electronics & Communication Engineering

Mechanical Engineering

Chemical & Biological Sciences

Humanities & Social Sciences

Mathematics

Physics

Civil Engineering

Computer Science And Engineering

Electrical Engineering

Electronics & Communication Engineering

Humanities & Social Sciences

Mathematics

Civil Engineering

Computer Science And Engineering

Electrical Engineering

Electronics & Communication Engineering

Mechanical Engineering

Chemical & Biological Sciences

Humanities & Social Sciences

Mathematics

Physics

Civil Engineering

Computer Science And Engineering

Electrical Engineering

Electronics & Communication Engineering

Mechanical Engineering

Civil Engineering

Computer Science And Engineering

Electrical Engineering

Electronics & Communication Engineering

Mechanical Engineering

Chemical & Biological Sciences

Humanities & Social Sciences

Mathematics

Physics

Civil Engineering

Computer Science And Engineering

Electrical Engineering

Electronics & Communication Engineering

Mechanical Engineering

Humanities & Social Sciences

Civil Engineering

Computer Science And Engineering

Electrical Engineering

Electronics & Communication Engineering

Mechanical Engineering

Chemical & Biological Sciences

Humanities & Social Sciences

Mathematics

Physics

Civil Engineering