• Thermal Detection of Malignancy and Estimation of Its Properties in a Human Breast, DST, SERB (ECR), 17.46 Lakhs
• Design and Fabrication of Corn (Maize) Shelling Machine to Promote Productivity of Corn in Meghalaya, DIC NIT Meghalaya, 2.95 Lakhs.
• Design of Shallow Water Turbine for energy Harvesting, Utilizing Stream Water in Hilly Places, DIC NIT Meghalaya, 13.67 Lakhs.

International Journals:

• M. A. Singh, K. Das, D. K. Sarma, Development and experimental validation of numerical formulations of a heuristic model in WEDM of H13 tool steel, Int. J. of Machining and Machinability of Materials (IJMMM), Inderscience, (In press), 2021
• U. Kashyap, K. Das, B. K. Debnath, U. Kashyap, S. K. Saha. Numerical study on effect of secondary surface on rectangular vortex generator. Journal of Thermal Science and Engineering Applications. 2020, Page Nos. 1-33. DOI: 10.1115/1.4047008
  
  
• A. Ranjan, S. S. Yadav, K. Das, Thermal and Flow Analysis ofSplit DropShaped Pin Fins for Improved Heat Transfer Rate, https://doi.org/10.1007/s40032-019-00548-4
• U. Kashyap, K. Das, B.K. Debnath, Numerical and Experimental Study of the Effect of Secondary Surfaces Fixed Over a Rectangular Vortex Generator, Journal of Thermal Science and Engineering Applications , 11, Page Nos 061003-1-12, 2019
• U. Kashyap, K. Das, B. K. Debnath, Effect of surface modification of a rectangular vortex generator on heat transfer rate from a surface to fluid: An extended study, International Journal of Thermal Sciences, 134, Page Nos -269-281, 2018.
• U. Kashyap, K. Das, B. K. Debnath, Effect of surface modification of a rectangular vortex generator on heat transfer rate from a surface to fluid, International Journal of Thermal Sciences, 127, Page Nos -61-78, 2018.
• M. A. Singh, K. Das, D. K. Sarma, Thermal simulation of machining of alumina with wire electrical discharge machining process using assisting electrode, Journal of Mechanical Science and Technology, 32, 1, Page Nos -333-343, 2018.
• K. Das, S. C. Mishra, Simultaneous estimation of size, radial and angular locations of a malignant tumor in a 3-D human breast - A numerical study, Journal of Thermal Biology, Vol.-http://dx.doi.org/10.1016/j.jtherbio.2015.07.001
  
• R. Singh, K. Das, S. C. Mishra, J. Okajima, S. Maruyama, Minimizing skin thermal damage using surface cooling during laser induced thermal therapy – a numerical study, ASME: Journal of Thermal Science and Engineering Applications, Vol.-8, Page Nos -011002-1-6, 2015.
• R. Singh, K. Das, J. Okajima, S. Maruyama, S.C. Mishra, Modelling skin cooling using optical windows and cryogens during laser induced hyperthermia in a multilayer vascularized tissue, Applied Thermal engineering, Vol.-89, Page Nos -28-35, 2015.
• K. Das, S. C. Mishra, Non-invasive estimation of size and location of a tumor in a human breast using a curve fitting technique, International Communications in Heat and Mass Transfer, Vol.-56, Page Nos -63-70, 2014.
• R. Singh, K. Das, S. C. Mishra, Laser-induced hyperthermia of nanoshell mediated vascularized tissue – a numerical study, Journal of Thermal Biology, Vol.-44, Page Nos -55-62, 2014.
• K. Das, S. C. Mishra, Study of thermal behavior of a biological tissue: An equivalence of Pennes bioheat equation and Wulff continuum model,Journal of Thermal Biology, Vol.-45, Page Nos -103-109, 2014.
• K. Das, R. Singh, S. C. Mishra, Numerical analysis for determination of the presence of a tumor and estimation of its size and location in a tissue,Journal of Thermal Biology, Vol.-38, Page Nos -32-40, 2013.
• K. Das, S. C. Mishra, Estimation of tumor characteristics in a breast tissue with known skin surface temperature, Journal of Thermal Biology, Vol.-38, Page Nos -311-217, 2013.
  

International Conferences:

• A. Das, R. S. Das, K. Das, Investigation on Fluid Flow, Heat and Mass transfer Characteristics in a LiCl-H2O Falling Film Absorber, 25th National and 3rd International ISHMT-ASTFE, Heat and Mass Transfer Conference (IHMTC-2019), December 28-31, 2019, IIT Roorkee, Roorkee, India.
• A. Das, R. S. Das, K. Das, Performance evaluation and enhancement of LiCl-H2O based falling film dehumidifier using surface modification, International Mechanical Engineering Congress (IMEC-2019), 29th November- 1st December 2019, NIT Tiruchirappalli, India.
  
• S. Sharma, S. Anand, K. Das, Flowanalysis of vortex generators in the shroud of a horizontal axis wind turbine,International Conference on Recent Innovations and Developments in MechanicalEngineering, November 8 - 10, 2018, NIT Meghalaya Shillong.
• S. Bhowmick, R. Gupta, K. Das, Thermalanalysis and estimation of tumor properties in breast tissue, InternationalConference on Recent Innovations and Developments in Mechanical Engineering,November 8 - 10, 2018, NIT Meghalaya Shillong.
• A. Ranjan, K. Das, Performanceanalysis of split drop shaped pin fins for improved heat transfer rate,International Conference on Recent Innovations and Developments in MechanicalEngineering, November 8 - 10, 2018, NIT Meghalaya Shillong.
• U. Kashyap, K. Das, B.K. Debnath, Effect of Surface Texture ofVortex Generator in Heat Transfer Enhancement, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Period -December 15–17, Place -MNNIT Allahabad, India, 2016.
  
• M. A. Singh, K. Das, D. K. Sarma, Numerical Simulation of the Material Removal Rate in Wire Electrical Discharge Machining of Non-Conducting Material, 24th International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV), Period - December 18 - 20, Place- Osaka, Japan, 2015
• K. Das, S. C. Mishra, Non-invasive detection of a tumor in a human breast, 12th International Conference on Flow Dynamics, Period -October 27–29, Place -Sendai, Japan, 2015.
• S. Yadav, K. Das, K. M. Pandey, A comparitive analysis of heat transfer in extended surfaces, 23rd National Heta and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, Period -December 17–20, Place -ISRO, Thiruvananthapuram, India, Page -ISHMTC2015-480, 2015.
• K. Das, S. C. Mishra, Thermal Investigation of Human Breast and Utilization of Curve Fitting Technique in Inverse Estimation of Tumor Characteristics, 11th International Conference on Flow Dynamics, Period -October 8–10, Place -Sendai, Japan, 2014.
• S. Yadav, K. Das, K. M. Pandey, A comparative analysis of heat transfer in extended surfaces with and without holes, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, Period -December 12–14, Place -IIT Kanpur, India, 2014.
• K. Das, S. C. Mishra, Non-invasive detection of breast tumor using curve fitting technique, 10thInternational Conference on Flow Dynamics, Period -November 25–27, Place -Sendai, Japan, Page -458-459, 2013.
• R. Singh, K. Das, S. C. Mishra, J. Okajima, S. Maruyama, Minimizing skin thermal damage using surface cooling during laser induced thermal therapy – a numerical study, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, Period -December 28–31, Place -IIT Kharagpur, India, Page -HMTC1300097, 2013.
• K. Das, S. C. Mishra, A comparative study of heat transfer in a biological tissue with Pennes bioheat equation and Wulff continuum model, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, Period -December 28–31, Place -IIT Kharagpur, India, Page -HMTC1300072, 2013.
• S. C. Mishra, K. Das, M. Ganguly, P. Goswami, Thermal estimation of properties and location of tumor in a 2-D biological tissue using surface temperature profile, 9thInternational Conference on Flow Dynamics, Period -September 19– 21, Place -Sendai, Japan, Page -184-185, 2012.
• S. C. Mishra, K. Das, R. Singh, Thermal analysis of a biological tissue with malignancy - estimation of its thermo-physical properties,8thInternational Conference on Flow Dynamics, Period -November 9– 11, Place -Sendai, Japan, Page -350-351, 2011.
• 
  

Book Chapters:

• S. Yadav, K. Das, K. M. Pandey, Chapter:A Comparative Analysis of Heat Transfer in Extended Surfaces with and WithoutHoles, Book Title: Fluid Mechanics and Fluid Power – Contemporary Research, Springer, (DOI 10.1007/978-81-322-2743-4_40), ISBN: 978-81-322-2741-0.
• A. Ranjan, K. Das, Performance analysis of split drop-shaped pin fins for improved heat transfer rate, Book Title: Advances in Mechanical Engineering, Springer, (https://doi.org/10.1007/978-981-15-0124-1), ISBN 978-981-15-0123-4.
• S. Bhowmick, R. Gupta, K. Das, Thermal analysis and estimation of tumor properties in breast tissue, Book Title: Advances in Mechanical Engineering, Springer, (https://doi.org/10.1007/978-981-15-0124-1), ISBN 978-981-15-0123-4.
• S. Sharma, S. Anand, K. Das, Flow analysis of vortex generators in the shroud of a horizontal axis wind turbine, International Conference on Recent Innovations and Developments in Mechanical Engineering, Book Title: Advances in Mechanical Engineering, Springer, https://doi.org/10.1007/978-981-15-0124-1), ISBN 978-981-15-0123-4.

Workshop:

• Ph.D
• Uddip Kashyap, Heat transfer enhancement in a channel using modified rectangular vortex generators, 2016-2019. (Co-Supervisor: Dr. Biplab K. Debnath)
  
• Aabir Das, Micro-porous membrane based liquid desiccant systems, 2017-till date (Supervisor: Dr. Rajat Subhra Das)
• Subhankar Saha, Performance analysis thermal and flow behaviour of modified VG, 2019-till date. (Co-Supervisor: Dr. Biplab K. Debnath)
  
• 
  
• M.Tech
• Surendra Singh Yadav, Heat Transfer Enhancement from a Plate to Fluid Using Fins, 2016- 2017
• Shalini Anand, Design Analysis of Shroud of a Small Scale Wind Turbine for Application in Meghalaya, 2016- 2017
• Raghavendra Gupta, Thermal Detection of Malignancy in a Human Breast, 2017-2018
• Alok Ranjan, Thermal Analysis of Extended Surfaces, 2017-2018
• Saurav Sharma, Flow Analysis of the Shroud of a Small Scale Horizontal Axis Wind Turbine, 2017-2018
• Souvan Panja,Heat transfer enhancement from surface to a fluid using truncated conical fins, 2018-2019
• Neeraj Gupta, Heat Transfer Enhancement using modified Vortex Generator, 2019-2020
  

• Trinayan Bora, Heat Transfer Enhancement from a Plate to Fluid Using modified cylindrical Fins, 2019-2020
  
  

Theory

1. Engineering Mechanics
   
2. Engineering Thermodynamics
3. Convective Heat and Mass Transfer
4. Advanced Fluid Mechanics
5. Conduction And Radiation

Practical

1.  Workshop Practice - I
2. Workshop Practice-II
3. Mechanical Lab-I
   
4. Mechanical Lab - II
5. Fluid Mechanics-II
   
6. Computational Laboratory
7. Thermal Engineering Laboratory
   

• Faculty-in-charge, Computational Laboratory, Department of Mechanical Engineering
  
• Faculty-in-Charge, Trnasporation, NIT Meghalaya
  

• End term examination, for the department of Electronics and Communication Engineering and department of Information Technology, Workshop Practice, North Eastern Hill University, Shillong, 2014, External Practical Examiner, from February 20, 2015 - February 21, 2015

Conference:

Workshop: